【单选题】
41若要启用WDT,则应依次填入WDTRST寄存器哪些数据?___
A. 0xe1、0xe2
B. 0xe1、0x1e
C. 0x1e、0xe1
D. 0x10、0x01
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
8×51的定时器,在下列哪种方式下具有自动加载功能?___
A. Mode0
B. Mode1
C. Mode2
D. Mode3
【单选题】
45下列哪种AD转换器的转换速度比较快?___
A. 双斜率型AD转换器
B. 比较型AD转换器
C. 连续计数式AD转换器
D. 逐渐接近式AD转换器
【单选题】
46下列哪种AD转换器的精密度比较高?___
A. 双斜率型AD转换器
B. 比较型AD转换器
C. 连续计数式AD转换器
D. 逐步逼近式AD转换器
【单选题】
47对于8×8 LED点阵而言,其中的LED个数及引脚各为多少?___
A. 64、16
B. 16、16
C. 64、12
D. 32、12
【单选题】
48在共阳极型8×8 LED点阵里,其阳极如何连接?___
A. 各行阳极连接到行引脚
B. 各列阳极连接到列引脚
C. 各行阳极连接到列引脚
D. 各列阳极连接到行引脚
【单选题】
49在共阳极型8×8 LED点阵里,其阴极如何连接?___
A. 各行阴极连接到行引脚
B. 各列阴极连接到列引脚
C. 各行阴极连接到列引脚
D. 各列阴极连接到行引脚
【单选题】
50双色8×8 LED点阵的列引脚与行引脚各位多少?___
A. 12、12
B. 8、16
C. 16、8
D. 24、8
【单选题】
___的方向规定由高电位点指向低电位点。
A. 电压
B. 电流
C. 能量
D. 电能
【单选题】
三相电动势到达最大的顺序是不同的,这种达到最大值的先后次序,称三相电源的相序,相序为U-V-W-U,称为___。
A. 正序
B. 负序
C. 逆序
D. 相序
【单选题】
电路的作用是实现能量的传输和转换、信号的___和处理。
A. 连接
B. 传输
C. 控制
D. 传递
【单选题】
电阻器反映导体对电流起阻碍作用的大小,简称___。
A. 电动势
B. 功率
C. 电阻率
D. 电阻
【单选题】
___反映了在不含电源的一段电路中,电流与这段电路两端的电压及电阻的关系。
A. 欧姆定律
B. 楞次定律
C. 部分电路欧姆定律
D. 全欧姆定律
【单选题】
并联电路中的总电流等于各电阻中的___。
A. 倒数之和
B. 相等
C. 电流之和
D. 分配的电流与各电阻值成正比
【单选题】
串联电路中流过每个电阻的电流都___。
A. 电流之和
B. 相等
C. 等于各电阻流过的电流之和
D. 分配的电流与各电阻值成正比
【单选题】
___的一端连在电路中的一点,另一端也同时连在另一点,使每个电阻两端都承受相同的电压,这种联结方式叫电阻的并联。
A. 两个相同电阻
B. 一大一小电阻
C. 几个相同大小的电阻
D. 几个电阻
【单选题】
___的电阻首尾依次相连,中间无分支的联结方式叫电阻的串联。
A. 两个或两个以上
B. 两个
C. 两个以上
D. 一个或一个以上
【单选题】
电流流过负载时,负载将电能转换成___。
A. 机械能
B. 热能
C. 光能
D. 其他形式的能
【单选题】
电功的数学表达式不正确的是___。
A. W=Ut/R2t
B. W=UIt
C. W=U2t/Rt
D. W=I2Rt
【单选题】
测量电压时,电压表应与被测电路___。
A. 并联
B. 串联
C. 正接
D. 反接
【单选题】
测量电流时,万用表的接线方法与直流电流表一样,应把万用表___在电路中。测量直流电压时,应把万用表与被测电路并联。
A. 串联
B. 并联
C. 正接
D. 反接
【单选题】
串联电路中各电阻两端电压的关系是___。
A. 各电阻两端电压相等
B. 阻值越小两端电压越高
C. 阻值越大两端电压越高
【单选题】
确定正弦量的三要素为 ___。
A. 相位、初相位、相位差
B. 最大值、频率、初相角
C. 周期、频率、角频率
【单选题】
纯电容元件在电路中___电能。
A. 储存
B. 分配
C. 消耗
【单选题】
当电压为5V时,导体的电阻值为5欧,那么当电阻两端电压为2V时,电阻值为___欧。
A. 10
B. 5
C. 2
【单选题】
电容器可用万用表___档进行检查。
A. 电压
B. 电流
C. 电阻
【单选题】
对称负载接成星形时,三相总电流___。
A. 等于零
B. 等于其中一相电流的三倍
C. 等于其中一相电流。
【单选题】
一段有源支路如图1所示,AB两端的电压UAB为___。
A. 10 V
B. —2V
C. 2V
D. —10V
【单选题】
如图2电路中,等效电阻=___
A. 150Ω
B. 900Ω
C. 600Ω
D. 100Ω
【单选题】
电流表的读数是4A,则电路中电流表的读数是 ___
A. 4A
B. 1A
C. 3A
D. 0A
【单选题】
在R、L、C串联电路中,已知=3Ω,=5Ω,=8Ω,则电路的性质为 ___。
A. 感性
B. 容性
C. 阻性
D. 不能确定
【单选题】
工业生产中大量的设备均为感性负载,功率因数往往很低,常采取___的方法来提高电网的功率因数。
A. 并联电容
B. 串联电容
C. 串联电感
D. 并联电感
【单选题】
交流电压表及电流表指示的数值是___
A. 平均值
B. 有效值
C. 最大值
D. 瞬时值
【单选题】
RLC串联电路发生谐振,,R=10Ω,Ω,则谐振时的感抗为___
A. 10Ω
B. 40Ω
C. 20Ω
D. 30Ω
【单选题】
RL从电路获得最大功率,此时RL=___。
A. 2Ω
B. 5Ω
C. 4Ω
D. 9Ω
【单选题】
使用电解电容时___。
A. 负极接高电位,正极接低电位
B. 正极接高电位,负极接低电位
C. 正极接高电位,负极也可以接高电位
D. 不分正负极
【单选题】
开关接1时,电压表的读数为___。
A. 0V
B. 0.2V
C. 1.96V
D. 2V
【单选题】
开关接2时,电流表的电流为___。
A. 0A
B. 10A
C. 0.2A
D. 约等于0.2A
【单选题】
开关接1时,电流表中流过的短路电流为___。
A. 0A
B. 0.2A
C. 10A
D. 约等于0.2A
【单选题】
正弦交流电常用的表达方法有___。
A. 解析式表示法
B. 波形图表示法
C. 相量表示法
D. 以上都是
【单选题】
电感两端的电压相位超前电流___。
A. 90°
B. 180°
C. 360°
D. 30°
推荐试题
【单选题】
___属于人工智能的应用。
A. :程序设计
B. :指纹识别
C. :社区聊天
D. :数据统计
【单选题】
),并了解他们考虑的一些问题。这些问题一般不包括___。
A. :他们对将要讨论的事项了解多少
B. :他们需要什么,又想要知道什么
C. :他们的艺术水平和欣赏能力如何
D. :他们将如何利用分析展示的信息
【单选题】
信息处理技术员资格考试的试卷包括信息处理基础知识、计算机基础知识、法律法规知识、专业英语、办公软件使用技能五个方面。某次考试后,对这五个方面分别统计了各考生的得分率以及全国的平均得分率。为了直观展现每个考生在各个方面的水平以及该考生的整体水平,并与全国平均水平进行比较,宜采用___。
A. :直方图
B. :圆饼图
C. :折线图
D. :雷达图
【单选题】
The___ is the primary device for entering information into the computer
A. :disk
B. :printer
C. :keyboard
D. :memory
【单选题】
___ system let you run more tlian one program at a time
A. : Application
B. :Software
C. : Real time
D. :Multitask
【单选题】
Small business may use___ for word processing
A. : microcomputers
B. :industrial computers
C. : mainframe computers
D. :supercomputers
【单选题】
Once you've made the Internet connection, you can send___ to any of computer user all around the w orld
A. :e-mail
B. :WWW
C. :ccc
D. :web station
【单选题】
Which statement about zone-based firewall configuration is true?___
A. You can assign an interface to more than one zone
B. Traffic is implicitly denied by de fault between interfaces in the same zone
C. The zone must be configured before it can be a ssigned
D. Traffic that is destined to or sourced from the Self zone is de nied by default
【单选题】
Refer to the exhibit line in this configuration prevents the help Desk user from modifying the interface configuration.___
A. Privilege exec level 10 interface
B. Privilege exec level 9 configure terminal
C. Privilege exec level 7 show start-up
D. Username HelpDesk privilege 6 password help
【单选题】
You have been tasked with blocking user access to websites that violate company policy, but the sites use dynamic IP addresses. What is the best practice for URl filtering to solve the problem?___
A. Enable URL filtering and use URL categorization to block the we bsites that violate company
B. Enable URL filtering and create a blacklist to block the websites that violate company policy
C. Enable URL filtering and create a whitelist to block the websites that violate company policy
D.
E. nable URL filtering and use URL categorization to allow only the websites that company policy allows users to access.
【单选题】
Within an 802. 1x-enabled network with the auth Fail feature configured, when does a switch port get placed into a restricted VLAN?___
A. When a conected client fails to authenticate after a certain number of attempts.
B. if a connected client does not support 802. 1x
C. when AAA new-model is ena bled
D. after a connected client exceeds a specified idle time
E. when 802. 1x is not globally enabled on the Cisco Catalyst switch
【单选题】
Which type of attack does a proxy firewall protect against ?___
A. cross-site scripting attack
B. worm traffic
C. port scanning
D. DDoS attacks
【单选题】
When an administrator initiates a device wipe command from the ISE, what is the immediate effect?___
A. It requests the administrator to choose between erasing all device data or only managed corporate data.
B. It requests the administrator to enter the device pin or password before proceeding with the operation
C. It notifies the device user and proceeds with the erase operation
D. It immediately erases all data on the device
【单选题】
What is a valid implicit permit rule for traffic that is traversing the ASa firewall?___
A. ARPs in both directions are permitted in transparent mode only
B. Unicast IPv4 traffic from a higher security interface to a lower security interface is permittee in routed mode only.
C. Unicast IPv6 traffic from a higher security interface to a lower security interface is permitted in transparent mode only.
D. Only BPDUs from a higher security interface to a lower secur ity interface are permitted in transparent mode.
E. Only BPDUs from a higher security interface to a lower secur ity interface are permitted in routed mode
【单选题】
A specific URL has been identified as containing malware. What action can you take to block users from accidentally visiting the URl and becoming infected with malware ?___
A. Enable URL filtering on the perimeter router and add the URls you want to block to the router's local URL list
B. Enable URL filtering on the perimeter firewall and add the URls you want to allow to the router's local URL list.
C. Enable URL filtering on the perimeter router and add the URls you want to allow to the firewall's local URL list
D. Create a blacklist that contains the URl you want to block and activate the blacklist on the perimeter rout
E. Create a whitelist that contains the URLs you want to allow and activate the whitelist on the perimeter router.
【单选题】
How does PEAP protect the EAP exchange ?___
A. It encrypts the exchange using the server certificate
B. It encrypts the exchange using the client certificate
C. It validates the server-supplied certificate,and then encrypts the exchange using the client certificate
D. It validates the client-supplied certificate,and then encrypts the excha nge using the server certificate
【单选题】
Which feature of the Cisco Email Security Appliance can mitigate the impact of snowshoe spam and sophisticated phishing attacks?___
A. contextual analysis
B. holistic understanding of threats
C. graymail management and filtering
D. signature-based IPS
【单选题】
Refer to the exhibit【nat (inside,outside)dunamic interface】 Which translation technique does this configuration result in?___
A. DynamIc PAT
B. Dynamic NAT
C. Twice NAT
D. Static NAT
【单选题】
Refer to the exhibit which are repre sents the data center?___
A. A
B. B
C. C
D. D
【单选题】
While trouble shooting site-to-site VPN, you issued the show crypto isakmp sa command. What does the given output show?___
A. IKE Phase 1 main mode was created on 10.1.1.5, but it failed to negotiate with 10.10 10.2
B. IKE Phase 1 main mode has successfully negotiated between 10.1.1.5 and 10.10..
C. IKE Phase 1 aggressive mode was created on 10.1.1.5, but it failed to negotiate with
【单选题】
Refer to the exhibit All ports on switch 1 have a primary vLan of 300 Which devices can host 1 reach?___
A. host 2
B. server
C. host 4
D. other devices within VLAN303
【单选题】
Which option is the cloud-based security service from Cisco the provides URL filtering, web browsing content security, and roaming user protection?___
A. Cloud Web service
B. Cloud Advanced Malware Protection
C. Cloud We b Security
D. Cloud Web Protection
【单选题】
How can you detect a false negative on an IPS?___
A. View the alert on the ips
B. Review the ips log
C. Review the is console
D. Use a third- party system to perform penetration testing.
E. Use a third- party to audit the next generation firewall rules
【单选题】
If a switch port goes directly into a blocked state only when a superior BPDU is received, what mechanism must be in use?___
A. STP BPDU guard
B. Loop guard
C. EtherChannel guard
D. STP Root guard
【单选题】
what improvement does EAP-FASTv2 provide over EAP-FAST? ___
A. It allows multiple credentials to be passed in a single EAP exchange.
B. It supports more secure encryption protocols
C. It allows faster authentication by using fewer packets.
D. It addresses security vulnerabilities found in the original protocol
【单选题】
When users login to the Client less Ssl Vpn using https://209.165.201.2/test ,which group policy will be applied?___
A. test
B. clientless
C. sales
D. DfitGrp Policy
E. Default RAGroup
F. Default WEB VPN
G. roup
【单选题】
Which user authentication method is used when users login to the Clientless SSLVPN portal using https://209.165.201.2/test?___
A. AAA with LOCAL database
B. AAA with RADIUS server
C. Certificate
D. :Both Certificate and aaa with LoCAL database
E. Both Certificate and AAA with RADIUS server
【单选题】
What' s the technology that you can use to prevent non malicious program to runin the computer that is disconnected from the network?___
A. Firewall
B. Sofware Antivirus
C. Network IPS
D. Host IPS
【单选题】
Which statement about the communication between interfaces on the same security level is true?___
A. Interfaces on the same security level require additional configuration to permit interinterface communication
B. Configuring interfaces on the same security level can cause asymmetric routing
C. All traffic is allowed by default between interfaces on the same security level
D. You can configure only one interface on a n individual security level
【单选题】
Which product can be used to provide application layer protection for tcp port 25 traffic?___
A. ESA
B. CWS
C. WSA
D. ASA
【单选题】
which iPS mode is less secure than other options but allows optimal network through put ?___
A. inline mode
B. inline-bypass mode
C. transparent mode
D. Promiscuous mode
【单选题】
Which feature of the Cisco Email security Appliance can mitigate the impact of snowshoe spam and sophisticated phishing attack?___
A. reputation based filtering
B. signature based IPS
C. contextual analysis
D. graymail management and filtering
【单选题】
Which type of social-engineering attack uses normal tele phone service as the attack vector?___
A. smishing
B. dialing
C. phishing
D. vishing
【单选题】
Which quantifiable item should you consider when you organization adopts new technologies?___
A. exploits
B. vulnerability
C. threat
D. Risk
【单选题】
Referencing the ClA model, in which scenario is a hash- only function most appropriate ?___
A. securing data at rest
B. securing real-time traffic
C. securing data in files
D. securing wireless transmissions
【单选题】
Which ports must be open between a aaa server and a microsoft server to permit Active Directory authentications?___
A. 445 and 389
B. 888 and 3389
C. 636 and 4445
D. 363 and 983
【单选题】
Refer to the exhibit for which reason is the tunnel unable to pass traffic___
A. the tunnel is failing to receive traffic from the remote peer
B. the local peer is unable to encrypt the traffic
C. the ip address of the remote peer is incorrect
D. UDP port 500 is blocked
【单选题】
Which type of attack can exploit design flaws in the implementation of an application without___
A. DHCP starvation attacks
B. low-rate dos attacks
C. application DDos flood attacks
D. application DDoS flood attacks
E. volume-based DDoS attacks
【单选题】
How can you protect CDP from reconnaissance attacks?___
A. Enable dynamic ARP inspection on all untrusted ports.
B. Enable dot1x on all ports that are connected to other switches.
C.
D. isable CDP on ports connected to endpoints.
【单选题】
Which type of attack can exploit design flaws in the implementation of an application without ?___
A. DHCP starvation attacks
B. low-rate dos attacks
C. application DDos flood attacks
D. application DDoS flood attacks
E. volume-based DDoS attacks