【单选题】
20/5t型桥式起重机的主接触器KM吸合后,过电流继电器立即动作的可能原因是___。
A. 电阻器R1~R5的初始值过大
B. 热继电器KH1~KH5额定值过小
C. 熔断器FUl和FU2太粗
D. 凸轮控制器SAl~SA3电路接地
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
X62W型铣床的主电路由___、熔断器FU1、接触器KM1~KM6、热继电器KH1~KH3、电动机M1~M3、快速移动电磁铁YA等组成。
A. 位置开关SQ1~S07
B. 按钮SB1~SB6
C. 速度继电器KS
D. 电源总开关QS
【单选题】
X62W型铣床的主电路由电源总开关QS、熔断器FUI、接触器KM1~KM6、热继电器KH1~K1H3、___、快速移动电磁铁YA等组成。
A. 位置开关SQ1~SQ7
B. 电动机Ml~M3
C. 按钮SB1~SB6
D. 速度继电器KS
【单选题】
X62W型铣床电气线路的控制电路由控制变压器TC、熔断器FU2和FU3、按钮SB1~SB6、位置开关SQ1~S07、速度继电器KS、___、热继电器kH1~kH3等组成。
A. 电动机M1~M3
B. 快速移动电磁铁YA
C. 电源总开关QS
D. 转换开关SAl-SA3
【单选题】
X62W型铣床的主轴电动机M1采用了___启动方法。
A. 全压
B. 定子减压
C. Y-△
D. 变频
【单选题】
X62W型铣床的主轴电动机M1采用了___启动方法。
A. Y-A
B. 全压
C. 延边△
D. 转子串电阻
【单选题】
X62W型铣床进给电动机M2采用了___启动方法。
A. 定子串电抗器
B. 自耦变压器
C. 全压
D. 转子串频敏变阻器
【单选题】
X62W型铣床的冷却泵电动机M3采用了___启动方法。
A. 定子串电抗器
B. 自耦变压器
C. Y-A
D. 全压
【单选题】
X62W型铣床的___采用了反接制动的停车方法。
A. 主轴电动机M1
B. 进给电动机M2
C. 冷却泵电动机M3
D. 风扇电动机M4
【单选题】
X62W型铣床___的冲动控制是由位置开关SQ7接通反转接触器KM2一下。
A. 冷却泵电动机M3
B. 风扇电动机M4
C. 主轴电动机M1
D. 进给电动机M2
【单选题】
X62W型铣床进给电动机M2的冲动控制是由位置开关S06接通___一下。
A. 反转接触器KM2
B. 反转接触器KM4
C. 正转接触器KM1
D. 正转接触器KM3
【单选题】
X62W型铣床进给电动机M2的___有上、下、前、后、中五个位置。
A. 前后(横向)和升降十字操作手柄
B. 左右(纵向)操作手柄
C. 高低速操作手柄
D. 启动制动操作手柄
【单选题】
X62W型铣床进给电动机M2的___有左、中、右三个位置。
A. 前后(横向)和升降十字操作手柄
B. 左右(纵向)操作手柄
C. 高低速操作手柄
D. 启动制动操作手柄
【单选题】
X62W型铣床手动旋转圆形工作台时,必须将圆形工作台转换开关SAl置于___
A. 左转位置
B. 右转位置
C. 接通位置
D. 断开位置
【单选题】
X62W型铣床使用圆形工作台时,必须把前后横向和升降十字操作手柄置于___。
A. 上升位置
B. 中间位置
C. 下降位置
D. 横向位置300
【单选题】
X62W型铣床使用圆形工作台时必须把左右纵向操作手柄置于___位置。
A. 中间
B. 左边
C. 右边
D. 纵向
【单选题】
X62W型铣床的主电路、控制电路和照明电路由___实现短路保护。
A. 欠电压继电器
B. 过电压继电器
C. 熔断器
D. 热继电器
【单选题】
X62W型铣床的三台电动机由___实现过载保护。
A. 熔断器
B. 过电流继电器
C. 速度继电器
D. 热继电器
【单选题】
X62W型铣床主轴电动机的正反转互锁由___实现。
A. 接触器常闭触点
B. 位置开关常闭触点
C. 控制手柄常开触点
D. 接触器常开触点
【单选题】
X62W型铣床工作台的终端极限保护由___实现。
A. 速度继电器
B. 位置开关
C. 控制手柄
D. 热继电器
【单选题】
X62W型铣床三相电源缺相会造成___不能启动。
A. 主轴一台电动机
B. 三台电动机都
C. 主轴和进给电动机
D. 快速移动电磁铁
【单选题】
X62W型铣床主轴电动机不能启动的可能原因有___。
A. 三相电源缺相
B. 控制变压器无输出
C. 速度继电器损坏
D. 快速移动电磁铁损坏
【单选题】
X62W型铣床工作台前后进给工作正常,左右不能进给的可能原因是___。
A. 进给电动机M2电源缺相
B. 进给电动机M2过载
C. 进给电动机M2损坏
D. 冲动开关损坏
【单选题】
X62W型铣床的圆工作台控制开关在“接通”位置时会造成___。
A. 主轴电动机不能启动
B. 冷却泵电动机不能启动
C. 工作台各方向都不能进给
D. 主轴冲动失灵
【单选题】
T68型镗床电气控制主电路由电源开关QS、熔断器FU1和FU2、___、热继电器KH、电动机M1和M2等组成。
A. 速度继电器KS
B. 行程开关SQ1~SQ8
C. 接触器KM1~KM7
D. 时间继电器KT
【单选题】
T68型镗床电气线路控制电路由控制变压器TC、按钮SB1~SB5、行程开关SQ1~S08、中间继电器KA1和KA2、___、时间继电器KT等组成。
A. 电动机M1和M2
B. 速度继电器KS
C. 制动电阻R
D. 电源开关QS
【单选题】
T68型镗床进给电动机的启动由___控制。
A. 行程开关S07和S08
B. 按钮SB1~SB4
C. 时间继电器KT
D. 中间继电器KA1和KA2
【单选题】
T68型镗床的进给电动机采用了___方法。
A. 频敏变阻器启动
B. 全压启动
C. Y一△启动
D. △一YY启动
【单选题】
T68型镗床的主轴电动机采用了___方法。
A. 频敏变阻器启动
B. Y一△启动
C. 全压启动
D. △-YY启动
【单选题】
T68型镗床的主轴电动机采用了___调速方法。
A. △-YY变极
B. Y-YY变极
C. 变频
D. 变转差率
【单选题】
T68型镗床的主轴电动机采用了近似___的调速方式。
A. 恒转速
B. 通风机型
C. 恒转矩
D. 恒功率
【单选题】
T68型镗床的主轴电动机M1采用了___的停车方法。
A. 能耗制动
B. 反接制动
C. 电磁抱闸制动
D. 机械摩擦制动
【单选题】
T68型镗床的主电路、控制电路和照明电路由___实现短路保护。
A. 速度继电器
B. 中间继电器
C. 熔断器
D. 热继电器
【单选题】
T68型镗床的主轴电动机由___实现过载保护。
A. 熔断器
B. 过电流继电器
C. 速度继电器
D. 热继电器
【单选题】
T68型管床主轴电动机的高速与低速之间的互锁保护由___实现。
A. 速度继电器常开触点
B. 接触器常闭触点
C. 中间继电器常开触点
D. 热继电器常闭触点
【单选题】
T68型镗床主轴电动机只能工作在低速挡,不能高速挡工作的原因是___。
A. 速度继电器故障
B. 行程开关SQ故障
C. 热继电器故障
D. 熔断器故障
【单选题】
X62W型铣床电气线路的控制电路由控制变压器TC、熔断器FU2和FU3___、位置开关SQ1~SQ7、速度继电器KS、转换开关SA1~SA3、热继电器KH1~KH3等组成。
A. 按钮SB1~SB6
B. 电动机M1-M3
C. 快速移动电磁铁YA
D. 电源总开关QS
【单选题】
T68型管床电气控制主电路由___、熔断器FU1和FU2、接触器KM1~KM7、热继电器KH、电动机Ml和M2等组成。
A. 电源开关QS
B. 速度继电器KS
C. 行程开关SQ1~S08
D. 时间继电器KT
【单选题】
反相比例运放电路应加的反馈类型是___负反馈。
A. 电压串联
B. 电压并联
C. 电流并联
D. 电流串联
【单选题】
三相可控整流触发电路调速时,要使三相锯齿波的波形高度一致,斜率相同,相位互差___。
A. 60°
B. 120°
C. 90°
D. 180°
【单选题】
滞回比较器的比较电压是___。
A. 固定的
B. 随输出电压而变化
C. 输出电压可正可负
D. 与输出电压无关
推荐试题
【单选题】
I am well aware that this is a ___ job.
A. rough
B. tough
C. wealthy
D. rogue
【单选题】
I found their kindness quite ___.
A. strong
B. overweening
C. keen
D. overwhelming
【单选题】
The captain wasn’t ___ on having him in the team.
A. eager
B. keen
C. overwhelmed
D. anxious
【单选题】
He was ___at the prospect of seeing them again.
A. thrilling
B. blessed
C. thrilled
D. emotional
【单选题】
They ___ against travelling at night in such a dangerous country.
A. consul
B. advocate
C. counsel
D. recommend
【单选题】
It is absolutely vital that food supplied should be ___.
A. sustained
B. enhanced
C. exhausted
D. maintained
【单选题】
He must have had an accident, or he ___ then.
A. would have been here
B. had to be here
C. should be here
D. would be here
【单选题】
It was essential that the application forms ___ back before the deadline (截止日期).
A. must be sent
B. would be sent
C. be sent
D. were sent
【单选题】
We ___ our breakfast when an old man came to the door.
A. just have had
B. have just had
C. just had
D. had just had
【单选题】
The bridge was named ___ the hero who gave his life for the cause of the people.
A. after
B. with
C. by
D. from
【单选题】
It wasn’t such a good dinner ___ she had promised us.
A. that
B. which
C. as
D. what
【单选题】
The road now ___two kilometers beyond the river.
A. develops
B. extends
C. expands
D. widens
【单选题】
It was claimed that the level of alcohol in the man’s blood was ___ to cause an accident.
A. sufficient
B. adequate
C. enough
D. accurate
【单选题】
Medical care reform has become this country’s most important public health ___.
A. question
B. stuff
C. matter
D. problem
【单选题】
His retail business in the city___ rapidly between the wars.
A. enlarged
B. extended
C. widened
D. expanded
【单选题】
Many frogs ___ the sound of their voice using special sacs(囊) in their throat.
A. amplify
B. widen
C. expand
D. enlarge
【单选题】
Some old people don’t like pop songs because they cannot ___ so much noise.
A. resist
B. sustain
C. tolerate
D. undergo
【单选题】
I have kept that portrait where I can see it every day, as it always ___ me of my university days in London.
A. recollects
B. reminds
C. recalls
D. invokes
【单选题】
The article suggests that when a person is under unusual ___ he should be especially careful to have a well-balanced diet.
A. weight
B. stress
C. press
D. nerve
【单选题】
You should hire a more ___ manager than the one you currently have.
A. sufficient
B. effective
C. respective
D. efficient
【单选题】
Surgeons began to ___ their hands and arms with soap and water before operating.
A. scrub
B. enhance
C. rub
D. exhibit
【单选题】
He might let something ___ in a moment of weakness.
A. slip
B. leak
C. to slip
D. to leak
【单选题】
Do not ___ the salad until you are ready to serve.
A. mix
B. toss
C. fling
D. eat
【单选题】
The ___ for which he had fought all his life no longer seemed important to him.
A. aims
B. objectives
C. subjects
D. goals
【单选题】
You should pause and ___ now.
A. tweet
B. ponder
C. squander
D. gossip
【单选题】
Eating too much fat can ____heart disease and cause high blood pressure.
A. contribute to
B. attribute to
C. attest to
D. devote to
【单选题】
It soon ___ that what she loved was not my person but my wealth.
A. widened
B. expanded
C. extended
D. developed
【单选题】
I want to buy a new tie to ___ this brown suit.
A. go into
B. go after
C. go with
D. go through
【单选题】
Our company decided to ___ the contract because a number of the conditions in it had not been met.
A. destroy
B. resist
C. assume
D. cancel
【单选题】
My first ___ was to turn and run.
A. institute
B. institution
C. instinct
D. tuition
【单选题】
I think it’s time I ___ in a new computer.
A. invested
B. insulted
C. interacted
D. impacted
【单选题】
The jeweler will ____ the inside of the ring with her name.
A. carve
B. engrave
C. cut
D. engross
【单选题】
He was bleeding from a _____ on his forehead.
A. lash
B. gash
C. ash
D. sash
【单选题】
Let us go to the next ______ on the agenda.
A. matter
B. debate
C. speech
D. item
【单选题】
They are _____ moving their office outside London.
A. considered
B. discussing
C. pondering
D. negotiating
【单选题】
Although she _____ the old pot thoroughly, she could not make it look completely clean.
A. scrubbed
B. washed
C. made
D. screwed
【单选题】
The mistake will remain an indelible ____ on his memory.
A. stain
B. thing
C. issue
D. accident
【单选题】
The wheel ____ through my frozen hand, and the car went right across the road.
A. slipped
B. sipped
C. dashed
D. disappeared
【单选题】
The cupboard was ____ with old fishing tackle.
A. stuffed
B. stocked
C. stored
D. filled
【单选题】
The decision depended on the ____ of a coin.
A. loss
B. lot
C. toss
D. sign