【单选题】
非真空电子束焊适用于大型焊件的焊接,但一次焊透探接不超过___mm。
A. 10
B. 20
C. 30
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
不属于预防火灾与爆炸事故的措施是___
A. 经常检查地锚埋设的牢固程度
B. 检查焊件连接部位情况,防止热传导引起火灾事故
C. 作业完毕应做到认真检查,确认无火灾隐患后方可离开现场
【单选题】
我国一般采用的安全电压___
A. 30V和15V
B. 36V和12V
C. 56V和25V
【单选题】
203从业人员发现事故隐患或其他不安全因素时,错误的做法是___
A. 接到报告的人员应放置以后再处理
B. 立即向现场安全生产管理人员或本单位负责人报管
C. 接到报告的人员应当及时予以处理
【单选题】
在气割气焊火焰中,火焰的温度最高的为___
A. 氧化灯
B. 中性焰
C. 碳化焰
【单选题】
电磁场作用对人体的危害___遗传。
A. 不一定会
B. 不会
C. 会
【单选题】
随着温度的升高,金属的导电性___
A. 增大
B. 减小
C. 不变
【单选题】
关于监督权,下列说法错误的是___
A. 对进行举报有功人员不予奖励
B. 发动人民群众和社会力量对安全生产进行监督
C. 鼓励对安全生产违法行为进行举报
【单选题】
等压式焊炬___
A. 能使用乙炔瓶或中压乙炔发生器
B. 只能使用低压乙炔发生器
C. 只能使用高压乙炔发生器
【单选题】
采用钨极氩弧焊焊接工件时,___
A. 需要填加焊丝
B. 不需要填加焊丝
C. 两者均可
【单选题】
埋弧焊对接直焊缝的焊接方法的基本类型有___
A. 1
B. 2
C. 3
【单选题】
熔化焊机可以和___设备近邻安装。
A. 氩弧焊机
B. 大吨位冲压机
C. 空气压缩机
【单选题】
有色金属是相对黑色金属而言的,下列金属属于有色金属的是___
A. 铝
B. 铁
C. 铬
【单选题】
关于氧化碳择,以下说法正确的是___
A. 二氧化碳焊不能采用射流过渡
B. 须二氧化碳焊在一般工艺范池时内即可达到射流过带
C. 三氧化碳焊在加入混合气体后才能达到射流过渡
【单选题】
在氩气和二氧化碳混合气体保护焊中二氧化碳的加入量通常为___
A. 1%-5%
B. 5%-30%
C. 15%-30%
【单选题】
安全电压值的规定是按公式U=IR计算的,其中R是指___
A. 接地电阻
B. 焊机空载电阻
C. 人体电阻
【单选题】
电磁场伤害是在指___电磁场的作用下,器官组织及功能将受到损伤。
A. 高频
B. 低频
C. 中频
【单选题】
下列___不是电子束焊接时产生的有害物质,
A. 金属蒸气
B. 二氧化碳
C. 臭氧
【单选题】
因电流的机械效应而发生电伤时,电流___人体
A. 通过
B. 不通过
C. 只通过表皮
【单选题】
固定动火区与周围易燃易爆设备管道的距离应在___m以上
A. 5
B. 10
C. 15
【单选题】
电渣焊可一次焊接很厚的工件,并且___坡口
A. 可以不开
B. 必须开
C. 需开"V"型
【单选题】
物质的自燃点越低,发生火灾的危险就___
A. 越大
B. 越小
C. 两者无关
【单选题】
高温回火的温度一般为___
A. 650-800℃
B. 500-650℃
C. 350-500℃
【单选题】
焊接操作现场应该必须保持必要的通道,车辆通道的宽度不得小于___m。
A. 2
B. 3
C. 4
【单选题】
硫磺粉的自然点为___℃
A. 575
B. 600
C. 625
【单选题】
氩弧焊时,材料表面清理不干净造成的缺陷不包括___
A. 气孔
B. 飞溅
C. 夹杂
【单选题】
熔化极惰性气体保护电弧焊用的保护气体正确的是___。
A. 氦气
B. 氧气
C. 二氧化碳
【单选题】
焊接时的噪声有时可高达___dB,对人体产生影响。
A. 150
B. 120
C. 100
【单选题】
铸件进行不含前必须进行预热,半热补焊的温度一般为___
A. 550-550℃
B. 400-500℃
C. 350-400℃
【单选题】
埋弧焊时,采用___时,不同的极性将产生不同的工艺效果。
A. 直流
B. 交流
C. 脉冲电流
【单选题】
冷补焊铸铁时,焊缝为非铸铁型焊缝,所采用的焊接材料是___
A. 异质焊接材料
B. 同致焊接材料
C. 灰铸铁
【单选题】
铸件进行补焊前必须进行预热,热补焊的温度一般为___
A. 600-700℃
B. 500-600℃
C. 400-500℃
【单选题】
下列物质中燃点最高的是___
A. 蜡烛
B. 豆油
C. 煤油
【单选题】
人员发生中毒后,应立即把现场的门窗打开,并___将中毒者转移出现场,到空气新鲜之处,解开衣扣,保持呼吸畅通。
A. 立即
B. 尽快
C. 迅速
【单选题】
碳化焰中氧与乙炔的比例为___
A. 小于1
B. 大于1
C. 等于1
【单选题】
中性焰可焊接的材料是___
A. 低碳钢,低疗亚钢、灰铸铁,球墨铁,铝及铝合金
B. 黄铜、青铜
C. 镍、高碳钢、高速钢
【单选题】
钢铁材料淬火后形成的最后组织是___
A. 奥氏体
B. 铁素体
C. 马氏体
【单选题】
在焊机使用中,要控制粉末的熔融状况,可改变___
A. 保接速度
B. ,转移型电弧的电流
C. 非转移型电弧的电流
【单选题】
在较知时间内,能引起心室颤动的最小电流,称为___电流。
A. 摆脱
B. 允许
C. 致命
【单选题】
在露天使用氧气瓶时必须放在___,避免太阳光强烈
A. 室内
B. 凉棚内
C. 房间内
【单选题】
工伤保险基金按伤残等级支付一次性伤残补助金,一级伤残发付标准为___个月的本人工资。
A. 27
B. 25
C. 23
推荐试题
【单选题】
which type of Pvlan port allows communication from all port types?___
A. isolated
B. in -line
C. community
D. promiscuous
【单选题】
Which command do you enter to configure your firewall to conceal internal addresses?___
A. no ip directed-broadcast
B. no ip logging facility
C. no proxy-arp
D. no ip inspect audit-trial
E. no ip inspect
F. route
【单选题】
Which feature defines a campus area network? ___
A. It has a limited number of segments.
B. It has limited or restricted Internet access
C. It lacks ex1ternal connectivity.
D. It has a single geographic location
【单选题】
What technology can you use to provide data confidentiality data integrity and data origin authentication on your network?___
A. IPSec
B. Certificate Authority
C. IKE
D. Data
E. ncryption Standards
【单选题】
which standard is a hybrid protocol that uses oakley and skerne ke y exchanges is an ISAKMP framework?___
A. SHA
B. IPSec
C.
D. ES
【单选题】
What is the actual los privilege level of User Exec mode?___
A. 1
B. 0
C. 5
D. 15
【单选题】
What is the effect of the asa command crypto isakmp nat-traversal?___
A. It opens port 500 only on the out side interface
B. It opens port 500 only on the inside interface
C. It opens port 4500 on all interfaces that are IPSec enabled
D. It opens port 4500 only on the out side interfac
【单选题】
Which Fire POWER preproce ssor engine is used to prevent SYN attacks?___
A. Inline normalization
B. IP Defragmentation
C. Ports can
D. etection
【单选题】
Which NAT type allows objects or groups to reference an IP address ?___
A. identity NAt
B. static NAT
C. dynamic
D. dynamic NAT
【单选题】
Which Auto NAT policies are processed first?___
A. Dynamic NAT with longest prefix
B. Dynamic NAT with shortest prefix
C. static NAT with longest prefix
D. static NAT with shortest prefix
【单选题】
Which feature allows a dynamic Pat pool to se lect the next address in the pat pool instead of the next port of an existing address?___
A. next IP
B. round robin
C. dynamic rotation
D. NAT address rotation
【单选题】
Which IPS detection method can you use to detect attacks that are based on the attackers IP address?___
A. anomally-based
B. policy-based
C. signature-based
D. reputation-based
【单选题】
Which type of encryption technology has the broadest platform support?___
A. software
B. middleware
C. file-level
D. hardware
【单选题】
Which type of address translation supports the initiation of comm unications bidirectionally ?___
A. multi-session PAT
B. dynamic NAT
C. dynamic PAT
D. static NAT
【单选题】
Which label is given to a person who uses existing computer scripts to hack into computers while lacking the expertise to write the own?___
A. script kiddy
B. white hat hacker
C. hacktivist
D. phreaker
【单选题】
What is the primary purpose of a defined rule in an IPS?___
A. to configure an event action that takes place when a signature is triggered
B. to define a set of actions that occur when a specific user logs in to the system
C. to configure an event action that is pre-defined by the system administrator
D. to detect internal attacks
【单选题】
Which option is the default valuce for the Diffie- Hell man group when configuring a site-to-site VPn on an asa device ?___
A. Group 1
B. Group 2
C. Group 5
D. Group 7
【单选题】
Which feature filters CoPP packets?___
A. access control lists
B. class maps
C. policy maps
D. route maps
【单选题】
Which command is used in global configuration mode to enable AAA?___
A. configure-model aaa
B. configure aaa-modelA
C. aaa new-model
D. aaa
E. XEC
【单选题】
Which statement about the given configuration is true?___
A. The single-connection command causes the device to establish one connection for all TACACS
B. The single-connection command causes the device to process one TacAcs request and then move to the next server
C. The timeout com mand causes the device to move to the next server after 20 seconds of TACACS inactive
【多选题】
What are two well-known security terms?___
A. phishing//网络钓鱼
B. ransomware //勒索软件
C. BPDU guard
D. LACP
E. hair-pinning
【多选题】
Which two commands must you enter to securely archive the primary bootset of a device___
A. router(config )#secure boot-config
B. router(config)#auto secure
C. router(config)#secure boot-image
D. router(config)#service passw ord-encryption
【多选题】
Which two functions can SIEM provide ?___
A. correlation between logs and events from multiple systems
B. event aggregation that allows for reduced log storage requirements
C. proactive malware analysis to block malicious traffic
D. dual-factor authentication
E. centralized firewall management
【多选题】
Which two features of Cisco Web Reputation tracking can mitigate web-based threats?___
A. buffer overflow filterin dhsuowip
B. Bayesian filters
C. web reputation filters
D. outbreak filtering
E. exploit filtering
【多选题】
What are two challenges when deploying host- level IPS? ___
A. The deployment must support multiple operating systems.
B. It is unable to provide a complete networ k picture of an attack.
C. It is unable to determine the outcome of e very attack that it detects
D. It does not provide protection for offsite computers
E. It is unable to detect fragmentation attacks
【多选题】
Which technology can be used to rate data fidelity and to provide an authenticated hash for data?___
A. file reputation
B. file analysis
C. signature updates
D. network blocking
【多选题】
Which two statements about host-based iPS solutions are true?___
A. It uses only signature-based polices
B. It can be deployed at the perimeter.
C. It can be have more restrictive policies than network-based IPS
D. it works with deployed firewall
E. It can generate alerts based on be havior at the de sto
【多选题】
When two events would cause the state table of a stateful firewall to be updated? ___
A. when a packet is evaluated against the outbound access list and is denied
B. when a con nection is created
C. when rate-limiting is applied
D. when a connection s timer has expired within the state table.
E. when an outbound packet is forwarded to the outbound interface
【多选题】
Which two characteristics apply to an intrusion Prevention System(IPS)?___
A. Cannot drop the packet on its own
B. Cabled directly inline with the flow of the network traffic
C. Runs in promiscuous mode wat
D. Does not add delay to the original traffic
E. Can drop traffic based on a set of rules
【多选题】
crypto ipsec trans form-set myset esp-md5-hmac esp-aes-256,What are two effects of the given command?___
A. It configures authentication use AES 256.
B. It configures authentication to use MD5 HMAC
C. It configures authentication use AES 256.
D. It configures encryption to ase MD5 HMAC.
E. It configures encryption to use AES 256
【多选题】
your security team has discovered a malicious program that has been harvesting the CEos email messages and the com pany 's user database for the last 6 months. What are two possible types of attacks your team discovered?___
A. social activism
B. EPolymorphic Virus
C. advanced persistent threat
D. drive-by spyware
E. targeted malware
【单选题】
以下关于数据处理的叙述中,不正确的足___。
A. :数据处理不仅能预测不久的未来,自时还能影响未
B. :数据处理和数据分析可以为决策提供真知灼见
C. :数据处理的重点应从技术角度去发现和解释数据蕴涵的意义
D. :数据处理足从现实世界到数据,冉从数据到现实世界的过程
【单选题】
“互联网十制造”是实施《中国制造2025》的重要措施。以下对“互联网十制造”主要特征的叙述中,不正确的是___。
A. :数字技术得到普遍应用,设计和研发实现协同与共享
B. :通过系统集成,打通整个制造系统的数据流、信息流
C. :企业生产将从以用户为中心向以产品为中心转型
D. :企业、产品和用户通过网络平台实现联接和交互
【单选题】
信息技术对传统教育方式带来了深刻的变化。以下叙述中,不正确的是___。
A. :学习者可以克服时空障碍,实现随时、随地、随愿学习
B. :给学习者提供宽松的、内容丰富的、个性化的学习环境
C. :通过信息技术与学科教学的整合,激发学生的学习兴趣
D. :教育信息化的发展使学校各学科全部转型为电子化教育
【单选题】
厂参加技能考核的女工有___人。
A. :16
B. :18
C. :20
D. :24
【单选题】
(a+b-|a-b|)/2=___。
A. :a
B. :b
C. : min (a,b)
D. :max (a,b)
【单选题】
在信息收集过过程中,需要根据项目的目标把握数据___要求,既不要纳入过多无关的数据,也不要短缺主要的数据:既不要过于简化,也不要过于繁琐。
A. :适用性
B. :准确性
C. :安全性
D. :及时性
【单选题】
许多企业常把大量暂时不用的过期数据分类归档转存于___中。
A. :ROM
B. :移动硬盘
C. :cache
D. :RAM
【单选题】
信息传递的三个基本环节中,信息接收者称为___。
A. :信源
B. :信道
C. :信标
D. :信宿
【单选题】
数据处理过程中,影响数据精度的因素不包括___。
A. :显示器的分辨率
B. :收集数据的准确度
C. :数据的类型
D. :对小数位数的指定