【简答题】
Of the six hundred thousand soldiers Napoleon had led into Russia, less than one hundred thousand came back. The weakened French army continued its retreat westward across Europe. Soon, Britain, Austria, Russia, and Prussia formed a powerful alliance and attacked these stragglers. In March 1814, Paris was captured. Napoleon abdicated and went into exile, his empire at an end.
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
拿破仑发兵60万进入俄国,只有不到10万士兵返回。元气大伤的法国军队在欧洲继续西撤。不久,英国、奥地利、俄国以及普鲁士组成强大的联盟,攻击这些散兵游勇。1814年3月,巴黎被攻占。拿破仑退位去过流放生活,他缔造的帝国随之灭亡。
解析
暂无解析
相关试题
【简答题】
By early 1941, Adolf Hitler, leader of Nazi Germany, had seized control of most of Europe. To the east of Hitler's German empire was the Soviet Union. On June 22, 1941, without a declaration of war, Hitler began an invasion of the Soviet Union that was the largest military land campaign in history. Confident of a quick victory, Hitler expected the campaign to last no longer than three months. He planned to use the blitzkrieg, or "lightning war," tactics that had defeated the rest of Europe. The invasion had three broad thrusts: against Leningrad and Moscow and through the Ukraine.
【简答题】
Caught off guard by the invasion, Soviet leader Joseph Stalin instructed the Russian people to "scorch the earth" in front of the German invaders. Farms and factories were burned, destroyed, or rendered useless. During the first ten weeks of the invasion, the Germans pushed the front eastward, and the Russians suffered more than a million casualties.
【简答题】
In the north, the Germans closed in on Leningrad. Despite great suffering, however, the people of Leningrad refused to surrender. As the battle of Leningrad dragged on into winter, the city's situation became desperate. As food ran out, people died from hunger and disease. By the middle of the winter of 1941-1942, nearly four thousand people starved to death every day. Close to one million people died as a result of the siege.
【简答题】
In the center of Russia, Hitler's goal was the capture of Moscow. Because the Germans had anticipated a quick victory, they had made no plans for winter supplies. October arrived with heavy rains. "General Mud" slowed down the movement of the Germans' lightning attack.
【简答题】
As Hitler's armies drew closer and closer to Moscow, an early, severe winter settled over the Soviet Union, the harshest in years. Temperatures dropped to minus 48 degrees Celsius. Heavy snows fell. The German soldiers, completely unprepared for the Russian winter, froze in their light summer uniforms. The German tanks lay buried in the heavy snowbanks. The Russian winter brought the German offensive to a halt.
【简答题】
By the summer of 1942, Hitler had launched two new offensives. In the south, the Germans captured Sevastopol. Hitler then pushed east to Stalingrad, a great industrial city that stretched for 48 kilometers along the Volga River. Despite great suffering, Soviet defenders refused to give up Stalingrad.
【简答题】
In November 1942, the Russians launched a counterattack. With little or no shelter from the winter cold in and around Stalingrad, German troops were further weakened by a lack of food and supplies. Not until January 1943 did the Germans give up their siege. Of the three hundred thousand Germans attacking Stalingrad, only ninety thousand starving soldiers were left. The loss of the battle for Stalingrad finally turned the tide against Hitler. The German victories were over, thanks in part to the Russian winter.
【简答题】
During 1943 and 1944, the Soviet armies pushed the German front back toward the west. In the north, the Red Army broke the three-year siege of Leningrad with a surprise attack on January 15, 1944. Within two weeks, the heroic survivors of Leningrad saw their invaders depart. By March 1944, the Ukraine farming region was again in Soviet hands. On May 9, 1944, Sevastopol was liberated from the Germans. The Russians were now heading for Berlin.
【简答题】
For Hitler, the invasion of the Soviet Union had turned into a military disaster. For the Russian people, it brought unspeakable suffering. The total Soviet dead in World War II reached almost 23 million.
【简答题】
The elements of nature must be reckoned with in any military campaign. Napoleon and Hitler both underestimated the severity of the Russian winter. Snow, ice, and freezing temperatures took their toll on both invading armies. For the Russian people, the winter was an icy defender.
【单选题】
________不属于鼠类及体表寄生虫携带的病原体。___
A. 鼠疫耶尔森菌
B. 汉坦病毒
C. 黄病毒属病毒
D. 致病性钩端螺旋体
【单选题】
病媒生物死体样本运送,如果在24h内不能到达实验室的,运送过程中箱内温度应保持在_____。___
A. 4℃以下
B. 0℃以下
C. -20℃以下
D. 4℃以上
【单选题】
病媒生物死体样本运送,如果在装箱后4h内能够到达实验室的,运送过程中箱内温度应保持在______。___
A. 4℃以下
B. 0℃以下
C. -20℃以下
D. 4℃以上
【单选题】
病媒生物的死体样本运送,如果4h-24h内能到达实验室的,应将样品置于-30℃冷冻后再送样,运送过程中箱内温度应保持在________。___
A. 4℃以下
B. 0℃以下
C. -20℃以下
D. 4℃以上
【单选题】
恰加斯病也称为美洲锥虫病,其重要的传播媒介是________。___
A. 采采蝇
B. 厩螫蝇
C. 锥蝽
D. 埃及伊蚊
【单选题】
_______是黑热病内脏利什曼病的主要传播媒介。___
A. 锥蝽
B. 白蛉
C. 蠓
D. 蚋
【单选题】
对于用作虫媒病毒分离或检测的蚊类标本,现场采集后应采用_______方式处置和运送。___
A. 杀虫剂熏杀+常温运输
B. 等蚊虫自然死亡+常温运输
C. 冷冻处死+常温运输
D. 冷冻处死+冷冻状态运输
【单选题】
_______不适用于入出境集装箱携带蝇、蚊、蠓的采集。___
A. 挥网法
B. 电动吸蚊器法
C. 直接捡取法
D. 二氧化碳诱蚊灯法
【单选题】
入境航空器应在______开始病媒生物监测。___
A. 卸货完成后
B. 抵达后
C. 等航空公司通知
D. 发现病媒生物时
【单选题】
进行集装箱携带输入性病媒生物监测时应准备的个人防护用品包括______。___
A. 乳胶手套、防护服
B. 防毒面具
C. 自给式呼吸器
D. 化学防护服
【单选题】
若要对采集到的输入性鼠类进行携带的病毒进行检测,取得其内脏器官的保存温度是_____。___
A. -80℃或以下
B. 0℃
C. 常温
D. 4℃-8℃
【单选题】
截获输入性活鼠或来自鼠疫流行区死鼠及经总署专家组确认和复核属于全国口岸首次截获的病媒生物应在______报告总署。___
A. 2小时之内
B. 8小时之内
C. 12小时之内
D. 24小时之内
【单选题】
入境船舶的蚊类和蝇类等双翅目病媒生物监测调查应白天在检疫锚地停泊期间进行,锚位距陆地距离不少于______,或在船舶靠泊后_____内进行。___
A. 1000 m;1h
B. 800 m、2 h
C. 400 m、4 h
D. 100 m、24 h
【单选题】
开展入境船舶输入性病媒生物监测工作中,在采集并保存病媒生物时由________陪同人员确认。___
A. 旅行社
B. 船方
C. 代理公司
D. 海事部门
【单选题】
在国境口岸或者交通工具上发现______有反常死亡或者死因不明的,国境口岸有关单位或者交通工具的负责人,必须立即向卫生检疫机关报告,迅速查明原因,实施卫生处理。___
A. 蚊类
B. 鼠类
C. 蝇类
D. 蜚蠊
【单选题】
采用鼠夹法监测鼠密度,应连续布放______。___
A. 2天
B. 3天
C. 4天
D. 5天
【单选题】
______不属于口岸区域鼠类常用监测方法。___
A. 鼠笼法
B. 鼠夹法
C. 目测法
D. 粉迹法
【单选题】
采用粉迹法监测鼠类密度时,滑石粉块的尺寸是______。___
A. 20cm×20cm
B. 30cm×30cm
C. 40cm×40cm
D. 50cm×50cm
【单选题】
______不属于蚊虫幼虫监测指标。___
A. 容器指数
B. 刺叮指数
C. 房屋指数
D. 布雷图指数
【单选题】
______不属于蚊虫成虫监测方法。___
A. 人帐诱法
B. 人工小时法
C. 小黑板法
D. 诱蚊器收集法
【单选题】
______不属于蝇类成虫监测方法。___
A. 诱蝇笼诱捕法
B. 捕蝇网网捕法
C. 直接目测法
D. 路径指数法
【单选题】
啮齿动物的臼齿常具有_____。___
A. 1对
B. 2对
C. 3对
D. 4对
【单选题】
______是仓鼠科特征。___
A. 背部有背囊
B. 尾部有尾囊
C. 口中两侧有颊囊
D. 腹部腹面有腹囊
【单选题】
_______蜱类假头基通常为矩形。___
A. 花蜱属
B. 璃眼蜱属
C. 扇头蜱属
D. 异扇头蜱属
【单选题】
_________鉴别特征是:体型较大,前胸背板具褐色蝶形大斑,其后缘中央向后延伸不达后缘,且前缘具“T”型黄斑。___
A. 黑胸大蠊
B. 美洲大蠊
C. 德国小蠊
D. 褐斑大蠊
【单选题】
_________鉴别特征是:中胸侧板有垂直的侧板杆,无颊栉和前胸栉,后头鬃2列,前足第5跗节具3根刺形亚端腹鬃,受精囊为“C”型。___
A. 人蚤
B. 二齿新蚤
C. 印鼠客蚤
D. 犬栉首蚤
【单选题】
_______不属于栉眼蚤属。___
A. 云南栉眼蚤
B. 方叶栉眼蚤
C. 同源栉眼蚤指名亚种
D. 偏远古蚤
【单选题】
___________是指在入境口岸采取卫生措施控制或杀灭行李、货物、集装箱、交通工具、设施、物品和邮包中存在的传播人类疾病的啮齿类媒介的程序。___
A. 除虫
B. 消毒
C. 灭鼠
D. 卫生处理
【单选题】
___________是指采用卫生措施利用化学或物理制剂的直接作用控制或杀灭人体或动物身体表面或行李、货物、集装箱、交通工具、物品和邮包中上的传染性病原体的程序。___
A. 除虫
B. 消毒
C. 灭鼠
D. 卫生处理
【单选题】
___________是指采用卫生措施控制或杀灭行李、货物、集装箱、交通工具、物品和邮包中传播人类疾病的昆虫媒介的程序。___
A. 除虫
B. 消毒
C. 灭鼠
D. 卫生处理
推荐试题
【多选题】
齿轮加工中,( )属于展成法加工。___。
A. 铣齿
B. 滚齿
C. 插齿
D. 剃齿
E. 刨齿
【多选题】
常用的热处理工艺包括( ),回火等。___。
A. 正火
B. 淬火
C. 表面淬火
D. 冷却
E. 退火
【多选题】
硬质合金刀具的特点有()。___。
A. 红硬性好
B. 耐磨性好
C. 强度和韧性差
D. 可加工性差
E. 塑性好
【多选题】
下列影响刀具寿命的因素有()。___。
A. 进给量
B. 切削速度
C. 刀具主偏角
D. 刀具前角
E. 工件材料
【多选题】
对于金属晶体结构中,大多数金属的晶格类型为( )。___。
A. 体心立方
B. 面心立方
C. 密排六方
D. 体心八方
E. 普通立方
【多选题】
编制数控加工工艺过程卡的步骤有()。___。
A. 画工序简图
B. 选用刀具
C. 确定主轴转速
D. 确定进给量
E. 确定背吃量
【多选题】
工艺系统受力变形引起的误差大小主要受( )影响。___。
A. 切削力大小
B. 系统刚度
C. 受力方向
D. 受力时间
E. 切削力作用点位置
【多选题】
以下属于按夹具通用化程度分类的夹具有()。___。
A. 组合夹具
B. 通用夹具
C. 专用夹具
D. 随行夹具
E. 可调夹具和成组夹具
【多选题】
切削过程中形成的表面有()。___。
A. 基准面
B. 定位表面
C. 过渡表面
D. 已加工表面
E. 待加工表面
【多选题】
切削层参数有()。___。
A. 切削厚度
B. 背吃刀量
C. 切削宽度
D. 平均总切削层横截面积
E. 切削速度
【多选题】
机械加工表面质量包括( )___。
A. 表面粗糙度
B. 表面层冷作硬化
C. 波度
D. 表面层残余应力
E. 金相组织变化
【多选题】
机械切削加工中,零件的加工工序通常包括()。___。
A. 切削加工工序
B. 热处理工序
C. 辅助工序
D. 定位工序
【多选题】
机床夹具的作用有()。___。
A. 保证加工精度
B. 提高生产率
C. 扩大机床使用范围
D. 保证安全
E. 降低成本
【多选题】
基面内包含的角为( )。___。
A. 刀尖角
B. 主偏角
C. 副偏角
D. 楔角
E. 刃倾角
【判断题】
金属的结晶过程是不断形成晶核和晶核不断长大的过程。
A. 对
B. 错
【判断题】
装配调整法为保证装配精度,又有固定调整法和可动调整法两种。
A. 对
B. 错
【判断题】
选择平整和光滑的毛坯表面作为粗基准,其目的是可以重复装夹使用。
A. 对
B. 错
【判断题】
前角是在基面内测量的。
A. 对
B. 错
【判断题】
工件在夹紧后不能动了,就表示工件定位正确。
A. 对
B. 错
【判断题】
焊接主要应用于型腔复杂尤其是内腔复杂的制件。
A. 对
B. 错
【判断题】
闭环的公差等于所有组成环公差之差。
A. 对
B. 错
【判断题】
碳素钢是含碳量小于2.11%的铁碳合金。
A. 对
B. 错
【判断题】
装配精度包括相互位置精度、相对运动精度和相互配合精度。
A. 对
B. 错
【判断题】
如果毛坯余量不大且均匀或精度要求不高,可不分加工阶段,一道工序加工成型即可。
A. 对
B. 错
【判断题】
加工细长轴一般采用一夹一顶的装夹方法。
A. 对
B. 错
【判断题】
如果毛坯余量较大且不均匀或精度要求较高,可不分加工阶段,一道工序加工成型即可。
A. 对
B. 错
【判断题】
《机械制造技术》课程是国内各类高校本科机械类专业教学的传统且重要的专业技术基础课程之一。
A. 对
B. 错
【判断题】
刨削是以刨刀相对工件的往复直线运动与工作台的连续进给来实现切削加工的。
A. 对
B. 错
【判断题】
定位基准与定位基准表面是一个概念,只是讲法不同而已。
A. 对
B. 错
【判断题】
在粗加工的条件下,一般都会采用效率优先原则。在粗加工的条件下,一般都会采用效率优先原则。
A. 对
B. 错
【判断题】
机床电机的功率应小于切削总功率。机床电机的功率应小于切削总功率。
A. 对
B. 错
【判断题】
特种加工是指那些不属于传动加工工艺范畴的加工工艺方法。特种加工是指那些不属于传动加工工艺范畴的加工工艺方法。
A. 对
B. 错
【判断题】
工件上经刀具切削后形成的表面是过渡表面。工件上经刀具切削后形成的表面是过渡表面。
A. 对
B. 错
【判断题】
滚齿加工时,滚齿机的切削主运动为分齿运动。滚齿加工时,滚齿机的切削主运动为分齿运动。
A. 对
B. 错
【判断题】
在机器装配或零件加工过程中,由互相连接的尺寸形成的封闭尺寸组称为尺寸链。在机器装配或零件加工过程中,由互相连接的尺寸形成的封闭尺寸组称为尺寸链。
A. 对
B. 错
【判断题】
摩擦焊属于熔化焊的一种。摩擦焊属于熔化焊的一种。
A. 对
B. 错
【判断题】
单件生产时,应尽量利用现有的专用设备和工具。单件生产时,应尽量利用现有的专用设备和工具。
A. 对
B. 错
【判断题】
常用刀具材料的种类有碳素工具钢、合金工具钢、高速钢、硬质合金钢。常用刀具材料的种类有碳素工具钢、合金工具钢、高速钢、硬质合金钢。
A. 对
B. 错
【判断题】
任何加工方法所得到的实际参数都不会绝对准确,从零件的功能来看,只要加工误差在零件图要求的误差范围之内,就认为保证了加工精度。任何加工方法所得到的实际参数都不会绝对准确,从零件的功能来看,只要加工误差在零件图要求的误差范围之内,就认为保证了加工精度。
A. 对
B. 错
【判断题】
在同一工作地长期地重复进行某一工件、某一工序的加工,为大量生产。在同一工作地长期地重复进行某一工件、某一工序的加工,为大量生产。
A. 对
B. 错