【多选题】
Which two are valid types of vLans using PVLANS ?___
A. Community VLAN
B. Backup VLAN
C. Secondary VLAN
D. Isolated VLAN
E. Isolated VLAN
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
AD
解析
暂无解析
相关试题
【多选题】
Which two commands are used to implement Resilient lOS Configuration ___
A. Secure boot-config
B. copy running-config tftp
C. copy flash:ios bin tftp
D. copy running-config startup-config
E. secure boot-image
【多选题】
Which two types of firewalls work at layer 4 and above ?___
A. Stateful inspection
B. Network Address Translation
C. Circuit-Level gateway
D. Static packet filter
E. Application Level firewall
【多选题】
Which two default settings for port security are true ?___
A. Violation is Protect
B. Violation is Restrict
C. Violation is Shutdown
D. Maximum number of MAC addresses is 2
E. Maximum number of MAC addresses is 1
【多选题】
Which two are characteristics of RADIUS?___
A. Uses UDP ports 1812 /1813
B. Uses TCP port 49
C. Uses UDP port 49
D.
E. ncrypts only the password between user and server
【多选题】
When setting up a site-to-site VPN with PSK authentication on a Cisco router, which two elements must be configured under crypto map?___
A. pfs
B. nat
C. reverse route
D. peer
E. transform-set
【多选题】
When using the Adaptive Security Device Manager(ASDM), which two options are available to add a new root certificate?___
A. Install from SFTP server
B. Usehttps
C. Install from a file
D. Use LDAP
E. Use SCEP
【多选题】
Which two SNMPv3 services support its capabilities as a secure networ k manage protocol? ___
A. access control
B. the shared secret key
C. authentication
D. authorization
E. accounting
【多选题】
Which two statements about routed firewall mode are true ?___
A. The firewall acts as a routed hop in the network
B. This mode conceals the presence of the firewall
C. The firewall requires a unique iP address for each interface
D. This mode allows the firewall to be added to an existing networ k with minimal additional configuration By default, this mode permits most traffic to pass throug
【多选题】
Which two statements describe DHCP spoofing attacks?___
A. They are used to perform man-in- the-middle attacks
B. They can access most network devices
C. They can modify the flow of traffic in transit. LNGKAIG
D. They protect the identity of ti attacker by masking the DHCP address
E. They can physically modify the network gateway
【多选题】
Which two types of VLANs using PVLANs are valid?___
A. isolated
B. promiscuous
C. backup
D. secondary
E. community
【多选题】
What are two limitations of the self-zone policies on a zone-based firewall?___
A. They are unable to block Https traffic
B. They restrict SNMP traffic.
C. They are unable to support Https traffic
D. They are unable to implement application inspection
E. They are unable to perform rate limiting
【多选题】
Which two descriptions of TACACS+ are true? ___
A. The TACACS+ header is unencrypted
B. It combines a uthentication and authorization
C. It uses TCP as its transport protocol
D. Only the password is encrypted.
E. It uses UDP as its transport protocol.
【多选题】
Which two actions does an IPS perform? ___
A. it spans the traffic
B. it reflects the traffic back to the sender
C. it encrypts the traffic
D. it terminates the user session or connection of the attacker
E. it reconfigures a device to block the traffic
【多选题】
In which form of fraud does an attacker try to learn information such as login credenti account information by ma squerading as a reputable entity or person in email, IM or communication channels ?___
A. phishing
B. Smurfit
C. Hacking
D. Identity Spoofing
【多选题】
Which two ESA services are available for incoming and outgoing mails ?___
A. anti-DoS
B. reputation filter
C. antispam
D. content filter
E. DLP
【多选题】
What are two reasons to recommend SNMPv 3 over SNMPv2?___
A. SNMPv3 is secure because you can configure authe ntication and privacy
B. SNMPv3 is insecure because it send in formation in clear text
C. SNMPv2 is insecure because it send information in clear text
D. SNMPv3 is a Cisco proprietary protocol
E. SNMPv2 is secure because you can configure authentication and privacy
【多选题】
Which two actions can a zone- based firewall apply to a packet as it transits a zone pair?___
A. drop
B. inspect
C. queue
D. quarantine
【单选题】
Which security principle has been violated if data is altered in an unauthorized manner?___
A. accountability
B. confidentiality
C. availability
D. integrity
【单选题】
Which IKE Phase 1 parameter can you use to require the site-to-site VPN to use a pre-shared ?___
A. encryption
B. authentication
C. group
【单选题】
Which command successfully creates an administrative user with a password of "cisco"on a Cisco router?___
A. username Operator privilege 7 password cisco
B. username Operator privilege 1 password cisco
C. username Operator privilege 15 password cisco
D. username Operator password cisco privilege 15
【单选题】
Which EAP method authenticates a client against Active Directory without the use of client-side 802.1X certificates?___
A. EAP-TLS
B. EAP-MSCHAPv2
C. EAP-PEAP
D.
E. AP-GTC
【单选题】
What is a limitation of network-based IPS?___
A. It must be in dividually configured to support every operating system on the network.
B. It is most effective at the in dividual host level
C. It is unable to monitor attacks across the entire netw ork
D. Large installations require numerous sensors to fully protect the network
【单选题】
When would you configure the ip dhcp snooping trust command on a sw itch?___
A. when the switch is connected to a DHCP server
B. when the switch is working in an edge capacit
C. when the switch is connected to a client system
D. when the switch is serving as an aggregator
【单选题】
How does the 802. 1x supplicant communicate with the authentication server?___
A. The supplicant creates EAP packets and sends them to the authenticator, which encapsulates them into RADIUS and forwards them to the authentication server.
B. The supplicant creates RADIUS packets and sends them to the authe nticator, which encapsulates the m into EAP and forwards them to the a uthentication server.
C. The supplicant creates RADIUS packets and sends them to the authenticator, which translates them into eap and forwards them to the a ut hentication server
D. The supplicant creates
E. AP packets and sends them to the authe nticator, which translates them into radius and forwards them to the authentication server.
【单选题】
Which command do you enter to verify the phase I status of a VPN connection?___
A. sh crypto se ssion
B. debug crypto isakmp
C. sh crypto isakmp sa
D. sh crypto ipsec sa
【单选题】
Refer to the exhibit. what is the e ffect of the given configuration?___
A. It enables authentication,
B. It prevents keychain authentication.
C. The two routers receive normal updates from one another.
D. The two device s are able to pass the message digest to one another.
【单选题】
Which command can you enter to configure OSPF to use hashing to authenticate routing updates?___
A. ip ospf aut hentication message-digest
B. neighbor 192 168.0 112 cost md5
C. ip ospf priority 1
D. ip ospf aut hentication-key
【单选题】
Which command can you enter to verify the status of Cisco lOS Resilient Configuration on a Cisco router?___
A. show secure bootset
B. secure boot-image
C. show binary file
D. ure boot-config
【单选题】
A user on your network inadvertently activates a botnet program that was received as an emai attachment. Which type of mechanism does Cisco Firepower use to detect and block only the botnet attack?___
A. network-based access control rule
B. reputation-based
C. user-ba sed access control rule
D. botnet traffic filter
【单选题】
What does the policy map do in CoPP?___
A. defines service parameters
B. defines packet selection parameters
C. defines the packet filter
D. define s the action to be performed
【单选题】
How is management traffic isolated on a Cisco ASR 1002?___
A. Traffic isolation is done on the vlan level
B. There is no management traffic isolation on a Cisco ASR 1002
C. Traffic is isolated based upon how you configure routing on the device
D. The management interface is configured in a special vRF that provides traffic isolation from the default routing table
【单选题】
Which statement about NaT table evaluation in the asa is true?___
A. After-auto NAT polices are appl d first
B. Manual NAT policies are applied first
C. the asa uses the most specific match
D. Auto NAT policies are applied first
【单选题】
Which information can you display by executing the show crypto ipsec sa command?___
A. ISAKMP SAs that are established between two peers
B. recent changes to the IP address of a peer router
C. proxy infor mation for the connection between two peers
D. IPsec SAs established between two peers
【单选题】
How can you prevent NAT rules from sending traffic to incorrect interfaces?___
A. Assign the output interface in the NAT statement
B. Add the no-proxy-arp command to the nat line.
C. Configure twice NAT instead o bject NAT. 5
D. Use packet-tracer rules to reroute misrouted NAT entries.
【单选题】
What term can be defined as the securing, control, and identification of digital data?___
A. cryptography
B. crypto key
C. cryptoanalysis
D. cryptology
【单选题】
Which feature in the dNS security module provide on and off network DNS protection?___
A. Data Loss Prevention
B. Umbrella
C. Real-time sandboxing
D. Layer-4 monitoring
【单选题】
Which a dverse consequence can occur on a network without BPDu guard ?___
A. The olde st switch can be elected as the root bridge
B. Unauthorized switches that are connected to the network can cause spanning-tree loops
C.
D. ouble tagging can cause the switches to experience CAM table overload.
【单选题】
What configuration is required for multitenancy ?___
A. shared infrastructure
B. multiple carriers
C. co-located resources
D. multiple separate zones
【单选题】
Why does ISE require its own certificate issued by a trusted CA?___
A. ISEs certificate allows guest devices to validate it as a trusted network device
B. It generates certificates for guest devices ba sed on its own certificate
C. It requests certificates for guest devices from the Ca server based on its own certificate.
D. ISE's certificate allows it to join the network security framework
【单选题】
which attack involves large numbers of ICMP packets with a spoofed source IP address?___
A. smurf attack
B. Teardrop attack
C. Nuke attack
D. SYN Flood attack
推荐试题
【填空题】
十六进制数2C代表的十进制数是___。 44
【填空题】
用放电仪对一块12V100Ah的蓄电池进行放电试验,若将放电电流设置为5A,则放电3小时后此蓄电池的理论剩余容量为___。 85Ah
【填空题】
我公司集团网邮件服务器的地址为___。 192.168.1.100
【填空题】
安装铝电物资管理系统软件前,需要先安装___。 orACle数据库
【填空题】
查看主机与局域网内其他主机的网络通讯是否正常,常采用windows系统的___命令。 ping
【填空题】
和利时MACSV6.5.2DCS系统中,要将某画面设置为登陆操作员站在线后初始显示页面,需要在___中设置为___。 操作员在线配置工具默认初始页
【填空题】
DCS系统使用加密狗的作用是___。 进行软件授权,确定对软件的使用权限
【填空题】
在和利时MACSV6.5.2DCS系统中新建工程前,必须创建一个项目,每个项目下最多可以添加___个工程,域号范围为___。 150-14
【填空题】
和利时MACSV6.5.2DCS系统校时方式分三种,分别为___、___、___,且系统的校时服务器是___。 软校时FM197GPS主历史站
【填空题】
变频器要与DCS系统进行通讯,必须设置正确的地址。地址设置是通过变频器上的___实现的,且ON代表___,OFF代表___。 拨码开关10
【填空题】
DP头上有9个针,与电机进行通讯时,用到的是3、8,且3为通讯的___端,8为通讯的___端。 正负
【填空题】
控制器算法组态时所需的常用算法库,均可在___中查找。 库管理器
【填空题】
和利时MACSV6.5.2DCS系统,最常用的校时方式是___。 软校时
【填空题】
每个功能块的上面、左面的是___,下面、右面是___。 输入端,输出端
【填空题】
数据库是从___中获取过程数据的,而数据库同时可以与多个I/OServer进行数据交换,一个I/OServer也可以连接一个或多个设备。 I/OServer或I/O驱动程序
【填空题】
数据库对一个点的访问实际上是对该点的___具体的访问。 某一参数
【填空题】
控组态软件提供的曲线组件工具包括___、___、___。 趋势曲线,X-Y曲线,温控曲线
【填空题】
我厂摄像头所用协议为___。 PELOC-D
【填空题】
和利时MACSV6.5.2DCS系统中,可以与控制器直接通讯的操作站最多___台。 16
【填空题】
MACSV6.5.2系统的网络结构由三部分组成:___、___、___。 管理网,系统网,控制网
【填空题】
MACSV6.5.2离线组态软件包括___、___、___、___、___。 工程总控,图形编辑,OPC通讯软件,离线查询和HSRTS工具
【填空题】
MACSV6.5.2系统可用的操作站站号范围是___和___。 80至111,208至239
【填空题】
主控单元也称___,遵循TCP\IP协议。 下位机
【填空题】
MACSV6.5.2工程师站组态的主要工具,由三个软件组成___、___、___。 工程总控,图形编辑器,AutoThink
【填空题】
MACSV6.5.2系统可用的控制站站号范围是___。 10至73
【填空题】
MACSV6.5.2系统域号通过___设置。 拨码开关
【填空题】
MACSV6.5.2上位机通过和利时自主开发的工业以太网协议___与下位机传递数据,下位机通讯采用___。 HSIE,ProfiBus-DP总线
【填空题】
数据库组态中AI录入必须包含的项有___、___,设备号,___,信号范围。 点名,站号,通道号
【填空题】
数字0.0520中的有效数字有___位。 3
【填空题】
数字量信号不需要进行___转换,可以直接经数字输入借口与___连接。 A/D,计算机
【填空题】
数字信号的另一个来源是采用各种数字式仪表测量___、___、___、___等物理量,产生数字或脉冲信号。 温度,压力,流量,速度
【填空题】
顺序控制系统又可简称为___。 SCS
【填空题】
说明下列符号的意义和单位:DN意义___单位___,dg意义___单位___,PN意义___单位___。 公称直径,mm,阀座直径,mm,公称压力,MpA
【填空题】
体的密度随___升高而减小,随___的增大而增大。 温度,压力
【填空题】
图形组态常见的交互特性有___、___、___、___、___,刷新底图一次,在线修改数据库点值。 推出窗口,切换底图,TiP显示,增减值,置位开关
【填空题】
图形组态分为___和___。 静态图形组态,动态图形组态
【填空题】
图形组态中互斥的特性有:切换底图与___。 推出窗口
【填空题】
网络传播速度的基本单位是___。在设置各模块地址时,当拔码开关置于“OFF“时,对应二进制数___。置于”ON“时,对应二进制数___。 波特率或___,1,0,
【填空题】
微分时间越大,微分作用___。 越强
【填空题】
微机系统由___和___组成。 硬件,软件