【填空题】
21068.___铁碳合金相图应用于锻造工艺。
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
T
解析
暂无解析
相关试题
【填空题】
21069.___热处理是改变材料含碳量的好办法。
【填空题】
21070.___在立方晶系中,原子密度最大的晶面间的距离也最大。
【填空题】
21071.___对液态金属进行热处理。
【填空题】
21072.___渗碳属于表面热处理。
【填空题】
21073.___金属理想晶体的强度比实际晶体的强度稍强一些。
【填空题】
21074.___“六线”是铁碳合金相图的特征线。
【填空题】
21075.___加热---保温---冷却,是热处理工艺的基本过程。
【填空题】
21076.___金属结晶时,过冷度越大,结晶后晶粒越粗。
【填空题】
21077.___一般情况下,金属的晶粒越细,其力学性能越差。
【填空题】
21078.___“正火”是普通热处理工艺。
【填空题】
21079.___“调质”是普通热处理工艺。
【填空题】
21080.___高速切削时由于速度极快,使得 70%~75%以上的切削热量来不及传递给工件就被切屑带走,工件基本上仍保持冷态加工,从而减少了热敏材料工件的热变形。
【填空题】
21081.___组成元素相同而结构不同的各金属晶体,就是同素异构体。
【填空题】
21082.___碳氮共渗是属于表面热处理。
【填空题】
21083.___数据采样插补一般分粗、精两步完成插补运算。第一步是粗插补,由软件实现, 第二步是精插补,由硬件实现。
【填空题】
21084.___晶体就是结晶的金属。
【填空题】
21085.___铁碳合金相图在金属热加工中非常重要。
【填空题】
21086.___数控加工程序中有关机床电器的逻辑控制及其他一些开关信号的处理是用 PLC 控制程序来实现的,一般用 C 语言编写。
【填空题】
21087.___金属材料与热处理是一门研究金属材料的成分、组织、热处理与金属材料性能之间的关系和变化规律的学科。
【填空题】
21088.___在一个程序段中,M 代码只能出现一次,若出现两次以上时,只有第一个 M 代码有效。
【填空题】
21089.___软极限行程保护位置通常设定在进给轴硬超程限位开关的内侧。
【填空题】
21090.___光电脉冲编码器既可以测量位置,又可以测量速度。
【填空题】
21091.___材料的成分和热处理决定组织,组织决定其性能,性能又决定其用途。
【填空题】
21092.___在开环系统中,丝杠副的接触变形将影响重复定位精度。
【填空题】
21093.___高速钢是工具钢。
【填空题】
21094.___回转刀架只能采用液压缸转位和定位销定位。
【填空题】
21095.___高速钢是合金钢工具钢。
【填空题】
21096.___在机床进给伺服系统中,多采用永磁同步电动机作为执行元件。
【填空题】
21097.___M 辅助功能被译码后,送往 PLC。
【填空题】
21098.___检测元件的作用是检测位移和速度的实际值,并向数控装置或伺服装置发送反馈信号,从而构成闭环控制。
【填空题】
21099.___纯金属的结晶过程实际上是机加工的过程。
【填空题】
21100.___金属的结晶过程由晶核的产生和长大两个基本过程组成。
【填空题】
21101.___只有一个晶粒组成的晶体成为单晶体。
【填空题】
21102.___对于接触式码盘来说,码道的圈数越多,则其所能分辨的角度越小,测量精度越
【填空题】
21103.___面缺陷分为晶界和亚晶界两种。
【填空题】
21104.___数控机床伺服系统的增益系数 Kv 越大,进给响应越快,位置控制精度越高。
【填空题】
21105.___晶体有规则的几何图形。
【填空题】
21106.___数控车床加工中,若刀具需移动一个准确的尺寸,则这个尺寸正确性是依靠进给伺服系统来保证的。
【填空题】
21107.___65Mn 焊接性能良好。
【填空题】
21108.___15 钢退火后硬度降低。
推荐试题
【多选题】
Which two commands are used to implement Resilient lOS Configuration ___
A. Secure boot-config
B. copy running-config tftp
C. copy flash:ios bin tftp
D. copy running-config startup-config
E. secure boot-image
【多选题】
Which two types of firewalls work at layer 4 and above ?___
A. Stateful inspection
B. Network Address Translation
C. Circuit-Level gateway
D. Static packet filter
E. Application Level firewall
【多选题】
Which two default settings for port security are true ?___
A. Violation is Protect
B. Violation is Restrict
C. Violation is Shutdown
D. Maximum number of MAC addresses is 2
E. Maximum number of MAC addresses is 1
【多选题】
Which two are characteristics of RADIUS?___
A. Uses UDP ports 1812 /1813
B. Uses TCP port 49
C. Uses UDP port 49
D.
E. ncrypts only the password between user and server
【多选题】
When setting up a site-to-site VPN with PSK authentication on a Cisco router, which two elements must be configured under crypto map?___
A. pfs
B. nat
C. reverse route
D. peer
E. transform-set
【多选题】
When using the Adaptive Security Device Manager(ASDM), which two options are available to add a new root certificate?___
A. Install from SFTP server
B. Usehttps
C. Install from a file
D. Use LDAP
E. Use SCEP
【多选题】
Which two SNMPv3 services support its capabilities as a secure networ k manage protocol? ___
A. access control
B. the shared secret key
C. authentication
D. authorization
E. accounting
【多选题】
Which two statements about routed firewall mode are true ?___
A. The firewall acts as a routed hop in the network
B. This mode conceals the presence of the firewall
C. The firewall requires a unique iP address for each interface
D. This mode allows the firewall to be added to an existing networ k with minimal additional configuration By default, this mode permits most traffic to pass throug
【多选题】
Which two statements describe DHCP spoofing attacks?___
A. They are used to perform man-in- the-middle attacks
B. They can access most network devices
C. They can modify the flow of traffic in transit. LNGKAIG
D. They protect the identity of ti attacker by masking the DHCP address
E. They can physically modify the network gateway
【多选题】
Which two types of VLANs using PVLANs are valid?___
A. isolated
B. promiscuous
C. backup
D. secondary
E. community
【多选题】
What are two limitations of the self-zone policies on a zone-based firewall?___
A. They are unable to block Https traffic
B. They restrict SNMP traffic.
C. They are unable to support Https traffic
D. They are unable to implement application inspection
E. They are unable to perform rate limiting
【多选题】
Which two descriptions of TACACS+ are true? ___
A. The TACACS+ header is unencrypted
B. It combines a uthentication and authorization
C. It uses TCP as its transport protocol
D. Only the password is encrypted.
E. It uses UDP as its transport protocol.
【多选题】
Which two actions does an IPS perform? ___
A. it spans the traffic
B. it reflects the traffic back to the sender
C. it encrypts the traffic
D. it terminates the user session or connection of the attacker
E. it reconfigures a device to block the traffic
【多选题】
In which form of fraud does an attacker try to learn information such as login credenti account information by ma squerading as a reputable entity or person in email, IM or communication channels ?___
A. phishing
B. Smurfit
C. Hacking
D. Identity Spoofing
【多选题】
Which two ESA services are available for incoming and outgoing mails ?___
A. anti-DoS
B. reputation filter
C. antispam
D. content filter
E. DLP
【多选题】
What are two reasons to recommend SNMPv 3 over SNMPv2?___
A. SNMPv3 is secure because you can configure authe ntication and privacy
B. SNMPv3 is insecure because it send in formation in clear text
C. SNMPv2 is insecure because it send information in clear text
D. SNMPv3 is a Cisco proprietary protocol
E. SNMPv2 is secure because you can configure authentication and privacy
【多选题】
Which two actions can a zone- based firewall apply to a packet as it transits a zone pair?___
A. drop
B. inspect
C. queue
D. quarantine
【单选题】
Which security principle has been violated if data is altered in an unauthorized manner?___
A. accountability
B. confidentiality
C. availability
D. integrity
【单选题】
Which IKE Phase 1 parameter can you use to require the site-to-site VPN to use a pre-shared ?___
A. encryption
B. authentication
C. group
【单选题】
Which command successfully creates an administrative user with a password of "cisco"on a Cisco router?___
A. username Operator privilege 7 password cisco
B. username Operator privilege 1 password cisco
C. username Operator privilege 15 password cisco
D. username Operator password cisco privilege 15
【单选题】
Which EAP method authenticates a client against Active Directory without the use of client-side 802.1X certificates?___
A. EAP-TLS
B. EAP-MSCHAPv2
C. EAP-PEAP
D.
E. AP-GTC
【单选题】
What is a limitation of network-based IPS?___
A. It must be in dividually configured to support every operating system on the network.
B. It is most effective at the in dividual host level
C. It is unable to monitor attacks across the entire netw ork
D. Large installations require numerous sensors to fully protect the network
【单选题】
When would you configure the ip dhcp snooping trust command on a sw itch?___
A. when the switch is connected to a DHCP server
B. when the switch is working in an edge capacit
C. when the switch is connected to a client system
D. when the switch is serving as an aggregator
【单选题】
How does the 802. 1x supplicant communicate with the authentication server?___
A. The supplicant creates EAP packets and sends them to the authenticator, which encapsulates them into RADIUS and forwards them to the authentication server.
B. The supplicant creates RADIUS packets and sends them to the authe nticator, which encapsulates the m into EAP and forwards them to the a uthentication server.
C. The supplicant creates RADIUS packets and sends them to the authenticator, which translates them into eap and forwards them to the a ut hentication server
D. The supplicant creates
E. AP packets and sends them to the authe nticator, which translates them into radius and forwards them to the authentication server.
【单选题】
Which command do you enter to verify the phase I status of a VPN connection?___
A. sh crypto se ssion
B. debug crypto isakmp
C. sh crypto isakmp sa
D. sh crypto ipsec sa
【单选题】
Refer to the exhibit. what is the e ffect of the given configuration?___
A. It enables authentication,
B. It prevents keychain authentication.
C. The two routers receive normal updates from one another.
D. The two device s are able to pass the message digest to one another.
【单选题】
Which command can you enter to configure OSPF to use hashing to authenticate routing updates?___
A. ip ospf aut hentication message-digest
B. neighbor 192 168.0 112 cost md5
C. ip ospf priority 1
D. ip ospf aut hentication-key
【单选题】
Which command can you enter to verify the status of Cisco lOS Resilient Configuration on a Cisco router?___
A. show secure bootset
B. secure boot-image
C. show binary file
D. ure boot-config
【单选题】
A user on your network inadvertently activates a botnet program that was received as an emai attachment. Which type of mechanism does Cisco Firepower use to detect and block only the botnet attack?___
A. network-based access control rule
B. reputation-based
C. user-ba sed access control rule
D. botnet traffic filter
【单选题】
What does the policy map do in CoPP?___
A. defines service parameters
B. defines packet selection parameters
C. defines the packet filter
D. define s the action to be performed
【单选题】
How is management traffic isolated on a Cisco ASR 1002?___
A. Traffic isolation is done on the vlan level
B. There is no management traffic isolation on a Cisco ASR 1002
C. Traffic is isolated based upon how you configure routing on the device
D. The management interface is configured in a special vRF that provides traffic isolation from the default routing table
【单选题】
Which statement about NaT table evaluation in the asa is true?___
A. After-auto NAT polices are appl d first
B. Manual NAT policies are applied first
C. the asa uses the most specific match
D. Auto NAT policies are applied first
【单选题】
Which information can you display by executing the show crypto ipsec sa command?___
A. ISAKMP SAs that are established between two peers
B. recent changes to the IP address of a peer router
C. proxy infor mation for the connection between two peers
D. IPsec SAs established between two peers
【单选题】
How can you prevent NAT rules from sending traffic to incorrect interfaces?___
A. Assign the output interface in the NAT statement
B. Add the no-proxy-arp command to the nat line.
C. Configure twice NAT instead o bject NAT. 5
D. Use packet-tracer rules to reroute misrouted NAT entries.
【单选题】
What term can be defined as the securing, control, and identification of digital data?___
A. cryptography
B. crypto key
C. cryptoanalysis
D. cryptology
【单选题】
Which feature in the dNS security module provide on and off network DNS protection?___
A. Data Loss Prevention
B. Umbrella
C. Real-time sandboxing
D. Layer-4 monitoring
【单选题】
Which a dverse consequence can occur on a network without BPDu guard ?___
A. The olde st switch can be elected as the root bridge
B. Unauthorized switches that are connected to the network can cause spanning-tree loops
C.
D. ouble tagging can cause the switches to experience CAM table overload.
【单选题】
What configuration is required for multitenancy ?___
A. shared infrastructure
B. multiple carriers
C. co-located resources
D. multiple separate zones
【单选题】
Why does ISE require its own certificate issued by a trusted CA?___
A. ISEs certificate allows guest devices to validate it as a trusted network device
B. It generates certificates for guest devices ba sed on its own certificate
C. It requests certificates for guest devices from the Ca server based on its own certificate.
D. ISE's certificate allows it to join the network security framework
【单选题】
which attack involves large numbers of ICMP packets with a spoofed source IP address?___
A. smurf attack
B. Teardrop attack
C. Nuke attack
D. SYN Flood attack