【单选题】
外流活门上装有几个马达?___
A. 三个自动马达;
B. 两个自动马达和一个人工马达;
C. 一个自动马达和二个人工马达。
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
水引射器引出的水送到何处?___
A. 机外;
B. PACK进口;
C. 冲压空气。
【单选题】
当两个PACK失效时,应急冲压空气进气门如何工作?___
A. 自动;
B. 须人工将冲压空气按钮置ON位。
【单选题】
在起飞和着陆阶段,PACK冲压空气进气风门会自动关闭,这从那儿来的信号?___
A. 油门杆;
B. 空地电门;
C. 轮速信号。
【单选题】
冲压空气按钮控制:___
A. 冲压空气进气门;
B. 冲压空气出口气门;
C. 应急冲压空气进气门。
【单选题】
热配平空气活门主要用于:___
A. 调节PACK出口温度;
B. 通过增加热空气以使相应区域的温度理想化;
C. 调节混合器出来的空气。
【单选题】
后货舱的通风空气从何处排出机外?___
A. 外流活门;
B. 蒙皮上的文氏管;
C. 单独的排气口。
【单选题】
货舱通风控制器控制:___
A. 隔离活门;
B. 抽风扇;
C. 隔离活门和抽风扇。
【单选题】
模式电门置MAN位,将人工升降速率电门保持在向下位时,放气活门将:___
A. 关闭;
B. 打开;
C. 不动。
【单选题】
空气循环机的组成:___
A. 涡轮、风扇;
B. 涡轮、压气机;
C. 涡轮、压气机、风扇。
【单选题】
当电子舱通风系统处于中间环路状态时,蒙皮空气出口活门上的小风门打开条件:___
A. 飞机在空中,蒙皮温度大于34℃;
B. 飞机在地面,蒙皮温度小于27℃;
C. 飞机在空中 ,蒙皮温度小于27℃。
【单选题】
PACK出口气动传感器的功用:___
A. 用于ECAM显示;
B. 用于把温度信号送到CFDIU(三级故障);
C. 用于PACK控制器失效时,气动操纵防冰活门。
【单选题】
压气机过热气动传感器的功用:___
A. 探测到过热时,气动关闭流量控制活门;
B. 用于过热探测和在ECAM上显示;
C. 用于过热探测和把高温信号送给CFDIU。
【单选题】
当座舱高度达到多少时,将会触发座舱高度过高警告?___
A. 8800英尺;
B. 9550英尺;
C. 10000英尺。
【单选题】
空调系统安全活门的作用是?___
A. A.防止反压超压
B. B.代替外流活门
C. C.防止正,反压超压
D. D.组件失效时给客舱供气
【单选题】
有关外流活门错误的是?___
A. A.应急冲压门开且客舱内外压差<1PSI时,外流活门半开
B. B.当外流活门采用人工方式时,按DITCHING电门不能将它关闭
C. C.当外流活门采用人工方式时,将MANV/S电门扳到UP位并保持,外流活门将逐渐关闭
D. D.此航班使用1号马达,下一航班使用2号
【单选题】
掺混空气活门的作用是什么?___
A. A.通过加入热空气来调节区域
B. B.通过加入冷空气来调区域温度
C. C.调节热空气压力
D. D.掺入一部分循环空气到座舱
【单选题】
掺混空气活门由什么控制?___
A. A.组件控制器
B. B.区域控制器
C. C.管道过热传感器
D. D热空气压力调节活门
【单选题】
当AEVC探测到气流量比需求值高时,哪个活门打开?___
A. A.蒙皮空气出口活门
B. B.蒙皮热交换器进口旁通活门
C. C.空调进口活门
D. D.蒙皮热交换器出口旁通活门
【单选题】
飞机高度39000英尺,客舱高度正常情况下最大为:___
A. A.8000英尺
B. B.12000英尺
C. C.14000英尺
D. D.39000英尺
【单选题】
空调组件过热时,哪个传感器气动关闭流量控制活门?___
A. A.组件进口引气温度传感器
B. B.压气机出口气动过热传感器
C. C.组件出口过热传感器
D. D.组件进口引气压力传感器
【单选题】
控制PACK出口温度的传感器在:___
A. A.涡轮出口
B. B.冷凝器下游
C. C.水分离器下游
D. D.压气机下游
【单选题】
如果区域控制器完全失效,PACK出口温度如何变化?___
A. A.24℃
B. B.PACK1为20℃,PACK2为10℃
C. C.15℃
D. D.固定在当前温度
【单选题】
如果一个组件控制器完全失效,PACK出口温度如何变化?___
A. A.另一个组件控制器接替工作,此组件工作不受影响
B. B.组件出口温度固定在24℃
C. C.组件出口温度固定在15℃
D. D.组件出口温度固定在当前温度
【单选题】
下列说法错误的是?___
A. A.热空气调压活门关闭时,通往驾驶舱,前后客舱的掺混空气活门也同时关闭
B. B.再循环风扇故障不影响温度调节
C. C.卫生间,厨房排气扇故障不影响客舱温度调节
D. D.冲压进气口在空中不全开
【单选题】
压气机气动过热传感器用于PACK过热时关闭:___
A. A.掺混空气活门
B. B.热空气压力活门
C. C.组件流量控制活门
D. D.旁通活门
【单选题】
用于调节区域温度的掺混空气压力必须:___
A. A.与客舱压力一致
B. B.高于客舱压力2PSI
C. C.高于客舱压力4PSI
D. D.高于客舱压力6.5PSI
【单选题】
怎样用人工方式控制增压系统?___
A. A.系统1失效,自动进入人工方式
B. B.系统2失效,自动进入人工方式
C. C.不可能,没有人工方式
D. D.按压方式选择电门到人工方式
【单选题】
当空调面板上HOTAIR电门上FAULT灯亮时,因为过热:___
A. A热空气压力调节活门关闭,掺混空气活门关闭
B. B热空气压力调节活门打开,掺混空气活门关闭
C. C热空气压力调节活门关闭,掺混空气活门打开
D. D.没有活门会受影响,需人工控制
【单选题】
正常飞行当蒙皮温度低于35℃时,电子舱通风系统控制冷却空气的温度,方法是:___
A. A增加来自驾驶舱的空气
B. B将空气通过蒙皮热交换器
C. C蒙皮空气进出口活门完全打开
D. D将空气抽出机外
【单选题】
冲压空气电门何时能给座舱引入外界空气?___
A. A任何时候
B. B只在客舱内外压差小于1PSI时
C. C只在客舱内外压差大于1SPI时
D. D只在外流活门完全打开时
【单选题】
空调组件控制器主通道故障时会出现什么情况?___
A. A辅助通道以备份方式工作,调节不是最优
B. B辅助通道完全替代工作
C. C空调组件失效
D. D相应组件出口温度固定在15摄氏度
【单选题】
空调组件控制器辅助通道故障时会出现什么情况?___
A. A对空调组件的调节无影响,只是备份方式失效
B. B空调组件失效
C. C无任何影响
D. D相应组件出口温度固定在15摄氏度
【单选题】
空调组件控制器主通道和辅助通道故障时会出现什么情况?___
A. A通过防冰活门将空调组件的出口温度控制在15℃
B. B空调组件完全失效
C. C无任何影响
D. D另一个组件控制器自动接替工作
【单选题】
如果热空气压力调节活门失效在全开位,会出现什么情况?___
A. A优化调节失效
B. B温度保持在故障发生时所选择的值
C. C无影响
D. D两个空调组件完全失效
【单选题】
如使用APU引气,空调组件的流量自动选择在:___
A. A高位
B. B正常位
C. C低位
D. D零位
【单选题】
掺混空气活门是通过下列哪种方法优化温度的?___
A. A增加热空气
B. B增加新鲜空气
C. C调节空调组件的流量
D. D增加冷空气
【单选题】
热空气压力调节活门:___
A. A调节热空气压力
B. B在无空气时弹簧保持打开
C. C在管道过热时自动打开
D. D电马达驱动
【单选题】
空调组件流量控制活门:___
A. A电控气动
B. B气控电动
C. C在发动机开车时自动打开
D. D只有开和关两个位置
【单选题】
区域温度可在何处选择?___
A. A驾驶舱
B. B客舱
C. C货舱
D. D驾驶舱和客舱
【单选题】
关于发动机的压力要求,当一个区域的加热和冷却需求不能实现时:___
A. A必须人工增加最小慢车
B. B自动增加最小慢车
C. C在任何情况下,飞行慢车都足够
D. DEIU会自动关断相应发动机引气
推荐试题
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.