【单选题】
[单选题]下列工作中,应以预算定额作为编制依据的是___。
A. 编制施工作业计划
B. 编制单位估价表
C. 建设单位编制年度投资计划
D. 结算计件工资
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
[单选题]在制定材料消耗定额时,可以用来确定材料损耗率的方法是___。
A. 理论计算法
B. 观察法
C. 经验法
D. 计算法
【单选题】
[单选题]施工定额是企业性质的定额,可以用来___
A. 确定工程造价
B. 控制建设工程投资
C. 编制施工作业计划
D. 进行建设项目管理
【单选题】
[单选题]施工定额的研究对象是同性质的施工过程,这里的施工过程是指___
A. 工序
B. 分部工程
C. 分项工程
D. 整个建筑物
【单选题】
[单选题]下列关于投资估算指标的表述中错误的是___
A. 投资估算指标是概算指标的综合与扩大
B. 投资估算指标是在项目建议书阶段编制投资估算时使用的
C. 投资估算指标是以独立的单项工程或完整的工程项目为对象编制的
D. 投资估算指标是根据已建或现有工程的价格数据和资料编制的
【单选题】
[单选题]在招投标过程中,若出现招标文件中分部分项工程量淸单特征描述与设计图纸不符,投标人应以___为准确定投标报价的综合单价。
A. 设计图纸
B. 消耗量定额
C. 工程量清单的项目特征描述
D. 企业定额
【单选题】
[单选]根据《建设工程工程量清单计价规范》GB50500--013,招标文件中要求投标人承担的风险费用,投标人应___。
A. 在投标总价的基础上加上一定比例
B. 在综合单价中给予考虑
C. 在总承包服务中给予考虑
D. 在其他项目费中给予考虑
【单选题】
[单选题]招标文件中的工程量清单标明的工程量是___。
A. 按施工图图示尺寸和清单工程量计算规则计算得到的工程净量
B. 承包人在履行合同义务中应予完成的实际工程量
C. 设计文件结合不同施工方案确定的工程量均值
D. 工程实体量和损耗量的合计
【单选题】
[单选题]某工程施工期间,因承包人原因导致工期延误,且在延误期内国家相关政策发生变化,由此引起的合同价款调整,应该___。
A. 调增的和调减的均予以调整
B. 调增的和调减的均不予调整
C. 调增的不予调整,调减的予以调整
D. 调增的予以调整,调减的不予调整
【单选题】
[单选题]合同工程实施期间,如果出现设计图纸(含设计变更)与招标工程量淸单任一项目的特征描述不符,且由此导致工程造价增减变化的,应按___的规定重新确定相应工程量清单项目的综合单价,调整合同价款。
A. 实际施工的项目特征
B. 设计图纸的项目特征
C. 招标工程量清单
D. 暂估价
【单选题】
[单选题]合同工程实施期间,如果出现招标工程量淸单中措施项目缺项,承包人应将新增措施项目实施方案提交发包人批准后,按照___的规定调整合同价款
A. 变更价款
B. 计价规范
C. 合同约定
D. 措施项目清单
【单选题】
[单选题]根据现行合同价款的调整要求,承包人采购材料和工程设备的,应在合同中约定主要材料或工程设备价格变化的范围和幅度,如没有约定,则单价变化超过___时,纷应做相应的调整。
A. 5%
B. 10%
C. 15%
D. 20%
【单选题】
[单选题]施工期间,需要进行价格调整的材料,承包人在采购前应将材料单价和采购数量报发包人核对,发包人应在___天内予以答复,否则视为已经认可。
A. 0
B. 5
C. 7
D. 14
【单选题】
[单选题]工程施工过程中,下列因不可抗力事件导致的人员伤亡、财产损失及其费用增加,由承包人承担的是___
A. 合同工程本身损害
B. 施工机械的停工损失
C. 待安装设备的损害
D. 工程修复费用
【单选题】
[单选题]工程变更引起施工方案改变,并使措施项目发生变化的,承包人提出调整措施项目费的,需按照实际发生变化的措施项目调整,其中不考虑承包人报价浮动因素的是___
A. 安全文明施工费
B. 二次搬运费
C. 冬雨期施工费
D. 夜间施工增加费
【单选题】
[单选题]某新校区抗震模拟实验室工程,主体部分采用钢架结构,施工合同约定钢材由业主供料,其余材料均委托承包商采购。但承包商在以自有机械设备进行主体钢结构制f吊装过程中,由于业主供应钢材不及时导致承包商停工7天,则承包商计算施工机械窝工费时,应按___向业主提出索赔
A. 机械台班费
B. 机械租赁费
C. 机械使用费
D. 机械台班折旧费
【单选题】
[单选题]由于业主原因,造成工期延长。在工期延长期间的管理人员的工资、办公、通讯和交通费等应归为索赔费用中的___
A. 人工费
B. 利润
C. 管理费
D. 间接费
【单选题】
[单选题]根据《标准施工招标文件》中通用条款的内容,由于发包人提供的材料和工程设备不符合合同要求,承包人可以向发包人索赔___
A. 工期+利润
B. 工期+费用
C. 费用+利润
D. 工期+费用+利润
【单选题】
[单选题]在索赔费用的计算方法中,___是最常用的种方法。
A. 实际费用法
B. 总费用法
C. 修正总费用法
D. 实物费用法
【单选题】
[单选题]某合同工程由于设计变更,发生现场签证事项,承包人为了赶工,在末经发包人现场确认和书面同意的情况下便擅自施工,由此产生的费用由___承担
A. 发包人
B. 承包人
C. 承发包双方共同
D. 设计单位
【单选题】
[单选题]根据现场签证程序,承包人应在现场签证工作完成后的7天内,向发包人提交现场签证报告,发包人应在收到现场签证报告后的___小时内对报告内容进行核实,予以确认或提出修改意见
A. 12
B. 24
C. 36
D. 48
【单选题】
[单选题]某包工包料工程发包后,发包人在预付款期满后的7天内仍未支付的,承包人可在付款期满后的第___天起暂停施工,发包人承担由此增加的费用和延误的工期。
A. 7
B. 8
C. 14
D. 15
【单选题】
[单选题]按照年度施工计划,某工程项目在本年度的安全文明施工费总额为40万元,则发包人应在工程开工后28天内,预付给承包人的安全文明施工费应不低于___万元。
A. 16
B. 20
C. 24
D. 28
【单选题】
[单选题]根据竣工结算的计算原则,措施项目中的总价项目除___外,其他应依据合同约定的项目和金额计算;如发生调整的,以发承包双方确认调整的金额计算。
A. 安全文明施工费
B. 夜间施工费
C. 二次搬运费
D. 冬雨期施工费
【单选题】
[单选题]关于总价合同计量的说法,正确的是___。
A. 采用工程量清单方式招标形成的总价合同,其工程量必须以承包人实际完成的工程量确定。
B. 采用经审定批准的施工图纸及其预算方式发包形成的总价合同,其各目的工程量是承包人用于结算的最终工程量
C. 承包人不需要在每个计量周期向发包人提交已完工程量报告
D. 监理人应在收到工程量计量报告后14天内进行复核
【单选题】
[单选题]根据《建设工程工程量清单计价规范》GB50500-2013,发包人进行安全明施工费预付的时间和金额分别为___。
A. 预付时间为工程开工后28天内,金额不低于安全文明施工费总额的60%
B. 预付时间为工程开工后42天内,金额不低于安全文明施工费总额的50%
C. 预付时间为工程开工后28天内,金额不低于安全文明施工费总额的50%
D. 预付时间为工程开工后14天内,金额不低于安全文明施工费总额的80%
【单选题】
[单选题]业主方在招标文件中规定了300万元的暂列金额。则每一个承包商在投标报价时对该项暂列金额的正确处理方式是___
A. 计入投标总报价但承包商无权自主使用余额归发包人所有
B. 计入投标总报价且承包商有权自主使用余额归承包人所有
C. 不计入投标总价在实际发生时由业主支付
D. 计入投标总价由工程师决定是否使用余额归承包人所有
【单选题】
[单选题]下列建筑安装工程的费用中,属于可以直接计入工程对象是___
A. 支付给生产工人的工资
B. 差旅交通费
C. 支付给管理人员的工资
D. 办公费
【单选题】
[单选题]建立施工项目成本管理责任制、开展成本控制的基础是___
A. 成本预测
B. 成本计划
C. 成本核算
D. 成本考核
【单选题】
[单选题]通过生产要素的优化配置,有效控制实际成本,属于施工成本管理的___。
A. 组织措施
B. 技术措施
C. 经济措施
D. 合同措施
【单选题】
[单选题]施工成本偏差的控制,其核心工作是___。
A. 成本分析
B. 成本考核
C. 纠正偏差
D. 调整成本计划
【单选题】
[单选题]下列施工成本管理活动或文件中,属于施工项目降低成本的指导文件及设立目标成本依据的是___
A. 施工成本预测
B. 施工成本分析
C. 施工成本计划
D. 施工成本核算
【单选题】
[单选题]以合同标书为依据,按照企业的预算定额标准制定的设计预算成本计划属于___
A. 竞争性成本计划
B. 指导性成本计划
C. 实施性成本计划
D. 按成本分解的成本计划
【单选题】
[单选题]下列不属于成本控制过程中动态资料的是___
A. 成本计划文件
B. 进度报告
C. 工程变更资料
D. 工程索赔资料
【单选题】
[单选题]项目施工准备阶段的施工预算成本计划是指___。
A. 竟争性成本计划
B. 指导性成本计划
C. 实施性成本计划
D. 战略性成本计划
【单选题】
[单选题]施工成本计划作为施工成本控制的依据,应包括的重要内容是___。
A. 控制目标的措施和规划
B. 预算收入目标
C. 成本支付的情况
D. 工程变更目标
【单选题】
[单选题]关于施工成本控制的步骤,即比较、分析、预测、纠偏和检查的说法,正确的是___。
A. 预测是在项目施工前估计所需的总费用
B. 分析是对比较结果的分析,以确定偏差的原因
C. 采取适当措施纠偏是控制工作的核心
D. 检查是对项目进展的跟踪,以确定偏差的严重性
【单选题】
[单选题]某建筑工程施工至某月月末,出现了工程的费用偏差小于0、进度偏差大于0的状况,则该工程的已完工作实际费用(ACWP)、计划工作预算费用(BCWS和已完工作预算费用(BCWP的关系可表示为___
A. BCWP>ACWP>BCWS
B. BCWS>BCWP>ACWP
C. ACWP>BCWP>BCWS
D. BCWS>ACWP>BCWP
【单选题】
[单选题]贏得值法评价指标之一的费用偏差反映的是___。
A. 统计偏差
B. 平均偏差
C. 绝对偏差
D. 相对偏差
【单选题】
[单选题]某地下工程施工合同约定,计划2月份开挖160000m3,合同单价均为85元/m3.到2月底,经确认实际开挖土方180000m3,实际单价为72元/m3,则该工程的以工作量表示的进度偏差SV为___万元。
A. 234
B. -234
C. 170
D. -170
【单选题】
[单选题]工程施工成本控制中,偏差分析的一个重要目的是___。
A. 发现施工成本是否已超支
B. 找出引起费用偏差的原因
C. 采取纠正费用偏差的描施
D. 估计完成项目所需的总费用
推荐试题
【多选题】
vSphere Update Manager allows which two virtual machine attributes to be upgraded? (Choose two.)___
A. Virtual machine firewall policies for NSX.
B. Software Packages in the virtual machine.
C. Virtual machine Hardware Version.
D. VMware Tools Upgrade.
【多选题】
What are two benefits of using NFS 4.1 with vSphere 6.x as compared to NFS 3? (Choose two.)___
A. NFS 4.1 supports Kerberos Authentication
B. NFS 4.1 supports multipathing
C. NFS 4.1 supports IPv6
D. NFS 4.1 supports hardware acceleration
【多选题】
Which three statements are true regarding Fault Tolerance? (Choose three.)___
A. Applications need to be continuously available to users.
B. Applications without native clustering capabilities can be protected.
C. Custom clustering solutions are complicated to configure and maintain.
D. Applications that have 16 vCPUs are supported.
E. Prevents application crashes by analyzing the workload and correcting problems.
【多选题】
Which two statements are true regarding VMware vSphere Flash Read Cache (vFRC)? (Choose two.)___
A. Cache fills and cache evictions happen in the granularity of a cache block size.
B. vFRC caches data from both read and write I/Os, but write I/Os are always serviced by the underlying storage.
C. vFRC caches data from both read and write I/Os, but write I/Os are always serviced by the underlying cache data.
D. Cache fills and cache evictions happen in the granularity of the disk block size.
【多选题】
What are two possible causes of Storage Distributed Resource Scheduler (SDRS) being disabled on one or more virtual machine disks in a datastore cluster? (Choose two.)___
A. The virtual machine has vSphere Fault Tolerance disabled.
B. The virtual machine is a template.
C. The virtual machine swap file is on a shared datastore.
D. The disk is a CD-ROM/ISO file.
【多选题】
An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle. Which two files should the administrator analyze to determine the cause of the failure? (Choose two.)___
A. Server\utils\logs\imsTrace.log
B. Server\utils\logs\install.txt
C. %TEMP%\utils\logs\vminst.log
D. %TEMP%\vminst.log
【多选题】
An administrator is unable to remove an ESXi 6.x host from a vSphere Distributed Switch. What are two likely reasons for this issue? (Choose two.)___
A. Vmkernel interfaces on the switch are still in use.
B. VM Network port group adapters are connected to different switch.
C. Physical NICs are migrated to different switch.
D. VM Network adapters are connected to this switch.
【多选题】
Which two Identity Sources are available to add for vCenter Single Sign-On authentication? (Choose two.)___
A. LocalOS
B. OpenLDAP
C. NIS as an LDAP Server
D. VCMSDS
【多选题】
What are three goals of resource management within a cluster? (Choose three.)___
A. To prevent virtual machines from monopolizing resources and to guarantee predictable service rates.
B. To exploit undercommitted resources and overcommit with graceful degradation.
C. To provide solutions to potential problems that you might encounter when using vCenter Server.
D. To control the relative importance of virtual machines and provide flexible dynamic partitioning.
E. To provide additional network administration capabilities.
【多选题】
Which three actions can be taken as a result of executing the vSphere Update Manager 6.x scan and remediation wizards? (Choose three.)___
A. Install and upgrade software in virtual machines.
B. Upgrade the firmware on ESXi host devices.
C. Upgrade and Patch ESXi hosts.
D. Install and update third-party software on hosts.
E. Upgrade virtual machine hardware.
【多选题】
Which two statements are true about deploying and using vSphere Replication? (Choose two.)___
A. ESXi hosts managed by a single vCenter Server instance require a connection between the two vSphere Replication appliances.
B. Sites managed by different vCenter Server instances require a connection between the two vSphere Replication appliances.
C. Sites managed by different vCenter Server instances require the use of Site Recovery Manager and a connection between the two vSphere Replication appliances.
D. ESXi hosts managed by a single vCenter Server instance require a single vSphere Replication appliance.
【多选题】
An administrator is attempting to power on a virtual machine, but the task is hanging at 95%. What three scenarios best explain why this problem is happening? (Choose three.)___
A. A virtual machine question is currently being posed to the administrator.
B. Another task for the virtual machine or other component is already in progress.
C. The VMware High Availability cluster has insufficient resources to guarantee failover.
D. The host has lost access to the storage device containing the virtual machine files.
E. The host is under resource contention and unable to power on the virtual machine.
【多选题】
Which three features are not supported when using Fault Tolerance in vSphere 6.x? (Choose three.)___
A. Virtual Volumes (VVOLS)
B. Storage vMotion
C. Virtual Machine Component Protection
D. vMotion
E. vSphere Distributed Switches
【多选题】
Which two storage controller configurations can be used with Virtual SAN? (Choose two.)___
A. SAS controllers in Passthrough mode
B. SAS controllers in RAID0 mode
C. SAS controllers in RAID1 mode
D. SAS controllers in RAID10 mode
【多选题】
Which three are requirements when using vMotion to move a virtual machine across vCenter Server systems? (Choose three.)___
A. Both vCenter Servers must be using Enhanced Linked Mode.
B. Both vCenter Servers must be in the same Single Sign-On Domain.
C. Time must be synchronized.
D. Duplicate VM MAC addresses must be configured.
E. Both vCenter Servers must have High Availability enabled on source and destination clusters.
【多选题】
Which two components can be used when configuring Enhanced Linked Mode? (Choose two.)___
A. vCenter Server Appliance
B. vRealize Operations Manager
C. vSphere Management Appliance
D. vCenter Server for Windows
【多选题】
An organization has a number of virtual machines that would benefit from Fault Tolerance. These include: <A single vCPU Apache Server> < A dual vCPU vCenter Server> < A quad vCPU SQL Server> <An eight vCPU Hadoop Server>. Which two virtual machines can be configured to use VMware Fault Tolerance? (Choose two.)___
A. Apache Server
B. vCenter Server
C. SQL Server
D. Hadoop Server
【多选题】
Which two badges are major badges in vRealize Operations? (Choose two.)___
A. Risk
B. Efficency
C. Workload
D. Faults
【多选题】
An administrator is deploying multiple Windows 2003 Virtual Machines from the same template. What two steps should be taken to avoid network conflicts? (Choose two.)___
A. Customize the guest operating system.
B. Install VMware Tools into the new virtual machines.
C. Copy the Microsoft Sysprep tools onto the vCenter Server system.
D. Ensure the e1000 vmnic is selected for each new virtual machine.
【多选题】
Which three conditions would prevent Storage I/O Control from being enabled on a group of datastores? (Choose three.)___
A. The datastores planned for the solution are used by different vSphere clusters.
B. A datastore planned for the solution is configured as a Raw Device Mapping file.
C. A datastore planned for the solution has three extents.
D. A datastore planned for the solution is configured as NFS.
E. The organization has an Enterprise license.
【多选题】
Which two actions are prerequisites to adding ESXi 6.x hosts to a vSphere Distributed Switch? (Choose two.)___
A. Verify that there is at least one Distributed Port Group on the Distributed Switch.
B. Verify that the Distributed Port Group have active uplinks configured in its teaming and failover policy.
C. Verify that the
D. istributed Switch has been configured with a Network Profile.
【多选题】
An organization has configured Distributed Power Management (DPM) on a vSphere 6 cluster. The organization wants to be alerted when an ESXi host has been powered down by DPM. Which two options represent the type and name of the alarm that would accomplish this? (Choose two.)___
A. DrsEnteringStandbyModeEvent
B. DrsEnteredStandbyModeEvent
C. Event-based
D. Condition-based
【多选题】
Which two allow for the disabling of Network Rollback operations? (Choose two.)___
A. Modifying the vpxd advanded configuration options and adding the config.vpxd.network.rollback key
B. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the<rollback> xml tag
C. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the <networkrollback> xml tag
D. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\firstboot\vpxd-service- spec.prop file and adjusting the <rollback> xml tag
【多选题】
An administrator is tasked with performing a vMotion migration of a virtual machine. The virtual machine is configured as follows: <vSphere Flash Read Cache (vFRC) enabled> <Is part of a Distributed Resource Cluster (DRS) Cluster> Which two statements are true? (Choose two.)___
A. Each ESXi host in the cluster supports multiple virtual flash resources.
B. Each ESXi host in the cluster supports one virtual flash resource.
C. DRS treats powered-on virtual machines with Flash Read Cache as having a preferred affinity to their current host and moves them only for mandatory reasons.
D. DRS treats powered-on virtual machines with Flash Read Cache as having a required affinity to their current host and does not move them.
【多选题】
An administrator is using the Host Failures to Tolerate Admission Control Policy for a vSphere High Availability ___ cluster. When configuring this setting on the cluster, the administrator sees this error message: <Insufficient resources to satisfy HA failover level on cluster > What are two likely causes for the error? (Choose two.)(AB)
A. The hosts in the cluster are disconnected.
B. A host in the cluster is displaying an HA error.
C.
D. istributed Resource Scheduler has not been configured on the cluster.
【多选题】
What are two ways to identify TCP/IP stack information? (Choose two.)___
A. Using the vSphere Web Client
B. Using esxcli network ip netstack
C. Using esxcfg-netstack
D. Using the vSphere Client
【多选题】
Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)___
A. A value in the Virtual Flash Read Cache text box must be entered.
B. A Flash Resource Pool for Cache size reservation must be entered.
C. The Device backing and the block size must be configured.
D. The
E. nable virtual flash host swap cache check box must be selected.
【多选题】
What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two.)___
A. Networks
B. Applications
C. Storage
D. Management
【多选题】
When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials. What two options are probable causes of the authentication failure? (Choose two.)___
A. The vSphere credentials have not been granted permissions.
B. The vSphere credentials are granted read-only permissions.
C. The vSphere credentials are granted no-access permissions.
D. The vSphere credentials are not a member of the local administrator group.
【多选题】
An administrator is performing a scripted installation of ESXi 6.x. In which three locations does the script need to be? (Choose three.)___
A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore
【多选题】
In order for a company to meet regulatory requirements, all ESXi 6.x Hosts must be configured to direct logs to a syslog server. What are two ways ESXi hosts can configured for this action? (Choose two)___
A. Use the esxcli system syslog command.
B. Edit them in the ESXi host Advanced System Settings.
C. From the Syslog collector user interface of the Web Client.
D. Syslog logging is not available for
E. SXi Hosts.
【多选题】
Which three actions can be executed when an alarm is triggered? (Choose three.)___
A. Send an email.
B. Send an SNMP trap.
C. Run a script or command.
D. Run an Orchestrator workflow.
E. Send a trigger to syslog.
【多选题】
An administrator is attempting to power on a virtual machine, but is unable to do so. Which two reasons are probable causes of the failure? (Choose two.)___
A. Storage access to the virtual machine swap file has been lost.
B. One of the virtual machine VMDK files is locked.
C. Virtual machine is running CentOS 7.0 64-bit.
D. Virtual machine has Hyper-Threading enabled.
【多选题】
An administrator has configured a host profile so that ESXi 6.x hosts will point to the corporate NTP server for time synchronization. The NTP server is located at 10.0.30.213, but time has not been synchronized properly across the ESXi hosts. The administrator reviews Host Profile settings as shown in the Exhibit. Which two steps are required to resolve the issue? (Choose two.)___
A. Correct the NTP server IP address.
B. Check the host for host profile compliance.
C. Remediate the host based on the updated host profile.
D. Change the NTP server to the FQDN as IP Addresses are not supported.
【多选题】
An administrator is attempting to migrate a large Hadoop virtual machine using vMotion. The administrator notices a delay when the machine is quiesced. The Hadoop virtual machine is processing many transactions a second to an in-memory database. Which two actions would help reduce the amount of time needed to perform a vMotion on this virtual machine? (Choose two.)___
A. Use multiple NICs for the vMotion vmkernel port.
B. Use a 10Gbps Network card for the vMotion vmkernel port.
C. Add an additional management network to help transmit the data quicker.
D. Disable Fault Tolerance before performing the vMotion.
【多选题】
An administrator is installing a new network card in an ESXi 6.x host that is part of a vSphere cluster. When the host is placed into maintenance mode, the vSphere Web Client displays the progress bar at 2% for over 30 minutes. Which two are likely reasons for this occurrence? (Choose two.)___
A. Maintenance mode is unable to migrate all virtual machines from the host.
B. There is a large number of virtual machines that must be migrated from the host.
C. VMware High Availability is in the process of reconfiguring the cluster.
D. Each virtual machine on the
E. SXi host must be reconfigured to recognize the new adapter.
【多选题】
Which two events happen when Distributed Resource Scheduler (DRS) is disabled? (Choose two.)___
A. The cluster's resource pool heirarchy and affinity rules are re-established when DRS is turned back on.
B. The cluster's resource pool hierarchy and affinity rules are not re-established when DRS is turned back on.
C. The cluster's resource pools are removed from the cluster.
D. The cluster's resource pools are removed from the cluster and assigned to the hosts.
【多选题】
Which two networking connection types can be configured on a virtual switch? (Choose two.)___
A. Virtual machine portgroups
B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network
C. Web services over the Management Network
D. NFS and FCoE storage services
【多选题】
An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails. What are two reasons that the host failed to enter maintenance mode? (Choose two.)___
A. The DRS cluster Automation Level is set to Partially Automated mode.
B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group.
C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group.
D. One of the virtual machines on the
E. SXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated.
【多选题】
When modifying a vApp, which two vSphere entities can be added? (Choose two.)___
A. A resource pool
B. A network pool
C. A vApp
D. A folder