【单选题】
接近开关的图形符号中,其菱形部分与常开触点部分用___相连。
A. 双虚线
B. 实线
C. 双实线
D. 虚线
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
当检测体为___时,应选用电容型接近开关。
A. 透明材料
B. 金属材料
C. 非金属材料
D. 不透明材料
【单选题】
选用接近开关时应注意对工作电压、负载电流、响应频率、___等各项指标的要求。
A. 检测电流
B. 工作速度
C. 检测功率
D. 检测距离
【单选题】
磁性开关可以由___构成。
A. 二极管和电磁铁
B. 接触器和按钮
C. 永久磁铁和干簧管
D. 三极管和永久磁铁
【单选题】
磁性开关中的干簧管是利用___来控制的一种开关元件。
A. 电流信号
B. 温度信号
C. 磁场信号
D. 压力信号
【单选题】
磁性开关用于高温高压场所时应选___的器件。
A. PP、PVDF材质
B. 多层纸质
C. 金属材质
D. 晶体材质
【单选题】
磁性开关在使用时要注意磁铁与___之间的有效距离在10mm左右。
A. 干簧管
B. 磁铁
C. 触点
D. 外壳
【单选题】
增量式光电编码器主要由光源、码盘、___、光电检测器件和转换电路组成
A. 光电三极管
B. 脉冲发生器
C. 检测光栅
D. 运算放大器
【单选题】
增量式光电编码器每产生一个___就对应于一个增量位移。
A. 输出电压信号
B. 输出光脉冲
C. 输出脉冲信号
D. 输出电流信号
【单选题】
增量式光电编码器由于采用相对编码,因此掉电后旋转角度数据___,需要重新复位。
A. 变大
B. 不会丢失
C. 变小
D. 会丢失
【单选题】
增量式光电编码器根据信号传输距离选型时要考虑___。
A. 输出信号类型
B. 电源频率
C. 环境温度
D. 空间高度
【单选题】
增量式光电编码器配线延长时,应在___以下。
A. 10m
B. 100m
C. 1m
D. 1km
【单选题】
可编程序控制器采用大规模集成电路构成的___和存储器来组成逻辑部分。
A. 运算器
B. 微处理器
C. 控制器
D. 累加器
【单选题】
可编程序控制器系统由基本单元、___、编程器、用户程序、程序存入器等组成。
A. 扩展单元
B. 键盘
C. 鼠标
D. 外围设备
【单选题】
在一个程序中,同一地址号的线圈___次输出,且继电器线圈不能串联只能并联。
A. 无限
B. 只能有一
C. 只能有二
D. 只能有三
【单选题】
FX2N系列可编程序控制器输入隔离采用的形式是___。
A. 电容器
B. 光电耦合器
C. 变压器
D. 发光二极管
【单选题】
可编程序控制器___使用锂电池作为后备电池。
A. RAM
B. ROM
C. 以上都是
D. EEPROM
【单选题】
可编程控制器在RUN模式下,执行顺序是___
A. 输入采样→执行用户程序→输出刷新
B. 输入采样→输出刷新→执行用户程序
C. 以上都不对
D. 执行用户程序→输入采样→输出刷新
【单选题】
PLC在程序执行阶段,输入信号的改变会在___扫描周期读入。
A. 当前
B. 下一个
C. 下两个
D. 下三个
【单选题】
用PLC控制可以节省大量继电器接触器控制电路中的___
A. 熔断器
B. 中间继电器和时间继电器
C. 开关
D. 交流接触器
【单选题】
___不是PLC主机的技术性能范围。
A. 本机I/O口数量
B. 高速计数输入个数
C. 高速脉冲输出
D. 按钮开关种类
【单选题】
FX2N可编程序控制器DC 24V输出电源,可以为___供电。
A. 电磁阀
B. 光电传感器
C. 交流接触器
D. 负载
【单选题】
FX2N可编程序控制器继电器输出型,不可以___。
A. 直接驱动交流指示灯
B. 输出高速脉冲
C. 驱动额定电流下的交流负载
D. 驱动额定电流下的直流负载
【单选题】
FX2N-20MT可编程序控制器表___类型。
A. 单结晶体管输出
B. 晶闸管输出
C. 晶体管输出
D. 继电器输出
【单选题】
下列选项___不是可编程序控制器的抗干扰措施。
A. 光电耦合器
B. 电源滤波
C. 晶体管输出
D. 可靠接地
【单选题】
FX2N系列可编程序控制器中回路并联连接用___指令。
A. AND
B. ORB
C. ANB
D. ANI
【单选题】
PLC梯形图编程时,右端输出继电器的线圈能并联___个。
A. 0
B. 不限
C. 二
D. 一
【单选题】
PLC编程时,子程序可以有___个。
A. 二
B. 一
C. 三
D. 无限
【单选题】
___是可编程序控制器使用较广的编程方式。
A. 位置图
B. 逻辑图
C. 功能表图
D. 梯形图
【单选题】
对于小型开关量PLC梯形图程序,一般只有___。
A. 初始化程序
B. 子程序
C. 中断程序
D. 主程序
【单选题】
FX2N PLC的通信口是___模式。
A. RS422
B. RS485
C. USB
D. RS232
【单选题】
三菱GX Developer PLC编程软件可以对___ PLC进行编程。
A. A系列
B. 以上都可以
C. FX系列
D. Q系列
【单选题】
将程序写入可编程序控制器时,首先将存储器清零,然后按操作说明写入___,结束时用结束指令。
A. 指令
B. 序号
C. 地址
D. 程序
【单选题】
根据电机正反转梯形图,下列指令正确的是___。
A. ORI Y001
B. LD X000
C. AND X001
D. AND X002
【单选题】
根据电动机顺序启动梯形图,下列指令正确的是___。
A. ORI Y001
B. ANDI T20
C. AND X001
D. AND X002
【单选题】
FX编程器的显示内容包括地址、数据、工作方式、___情况和系统工作状态等。
A. 指令执行
B. 参数
C. 位移储存器
D. 程序
【单选题】
变频器是通过改变___电压、频率等参数来调节电动机转速的装置。
A. 交流电动机定子
B. 交流电动机转子
C. 交流电动机定子、转子
D. 交流电动机磁场
【单选题】
交—交变频装置输出频率受限制,最高频率不超过电网频率的___,所以通常只适用于低速大功率拖动系统。
A. 3/4
B. 1/5
C. 1/2
D. 2/3
【单选题】
变频器输出侧技术数据中___是用户选择变频器容量时的主要依据。
A. 输出频率范围
B. 额定输出电流
C. 额定输出电压
D. 配用电动机容量
【单选题】
西门子MM440变频器可外接开关量,输入端⑤~⑧端作多段速给定端,可预置___个不同的给定频率值。
A. 4
B. 16
C. 8
D. 15
【单选题】
在变频器的几种控制方式中,其动态性能比较的结论是:___
A. 转差型矢量控制系统优于无速度检测器的矢量控制系统
B. U/f控制优于转差频率控制
C. 转差频率控制优于矢量控制
D. 无速度检测器的矢量控制系统优于转差型矢量控制系统
推荐试题
【多选题】
A vSphere Administrator attempts to enable Fault Tolerance for a virtual machine but receives the following error: Secondary VM could not be powered on as there are no compatible hosts that can accommodate it. What two options could cause this error? (Choose two.)___
A. The other ESXi host(s) are in Maintenance Mode.
B. Hardware virtualization is not enabled on the other ESXi host(s).
C. The other ESXi host(s) are in Quarantine Mode.
D. Hardware MMU is enabled on the other
E. SXi host(s).
【多选题】
Storage capabilities be populated in what two ways? (Choose two.)___
A. The administrator can use tags to describe capabilities.
B. Default capabilities are provided by vCenter Server.
C. Datastores can advertise their capabilities through VAAI.
D. Datastores can advertise their capabilities through VASA.
【多选题】
In network troubleshooting it is important to know what upstream switch the ESXi host is connected to. Which two features does ESXi provide to help identify the upstream switch? (Choose two.)___
A. Promiscuous mode
B. DPM
C. LLDP
D. CDP
【多选题】
Virtual Volumes supports which three VMware features? (Choose three.)___
A. Instant Clones
B. Distributed Resource Scheduler
C. Linked Clones
D. vMotion
E. Storage Distributed Resource Scheduler
【多选题】
vSphere DRS helps to balance virtual machines with available resources in a vSphere cluster. What three types of resources can be taken into account for balancing? (Choose three.)___
A. CPU
B. physical NIC saturation of an ESXi host
C. virtual NIC saturation of a virtual machine
D. RAM
E. storage latency
【多选题】
Which three design requirements must be satisfied to enable RAID-6 objects in a VMware vSAN cluster? (Choose three.)___
A. vSAN Advanced license or higher
B. vSAN stretched cluster
C. at least six hosts contributing storage
D. deduplication and compression
E. all flash configuration
【多选题】
When using "Cluster resource percentage" for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)___
A. Total vCPUs assigned to each VM.
B. Average CPU usage on each VM over time.
C. Memory reservations on each VM.
D. Total memory assigned to each VM.
E. Average active memory on each VM over time.
F. CPU reservations on each VM.
【多选题】
Which are four attributes of the Active vCenter HA node? (Choose four)___
A. It uses the vCenter HA network to communicate with the Witness node.
B. It constantly replicates vPostgres data with the Witness node.
C. It uses a public IP address for the management interface.
D. It runs the active vCenter Server Appliance instance.
E. It uses the vCenter HA network for replication of data to the Passive node.
F. It provides a quorum to protect against split-brain situations.
【多选题】
Which are two vCenter Server two-factor authentication methods? (Choose two.)___
A. RSA SecurID
B. Smart Card
C. SAML
D. Symantec VIP
【多选题】
An administrator is creating VMkernel adapters on an ESXi 6.5 host and wants to create separate VMkernel adapters for every type of traffic in the default TCP/IP stack. Which three types of traffic can be explicitly enabled on a separate VMkernel adapter? (Choose three.)___
A. Virtual SAN traffic
B. NFS traffic
C. vMotion traffic
D. vSphere HA traffic
E. Fault Tolerance logging traffic
【多选题】
When migrating a Windows vCenter Server 6.0 to the vCenter Server Appliance 6.5, which two will be migrated by default? (Choose two.)___
A. Local Windows OS users and groups
B. Configuration
C. Custom ports
D. FQDN
E. Historical and Performance data
【多选题】
Which three types of Content Libraries exist within vSphere 6.5? (Choose three.)___
A. Remote Content Library
B. Published Content Library
C. Local Content Library
D. Shared Content Library
E. Subscribed Content Library
【多选题】
An administrator cannot enable multi-processor Fault Tolerance (SMP-FT) for a virtual machine. Which are two possible causes for this? (Choose two.)___
A. The virtual machine is running on a vSAN datastore.
B. The Fault Tolerance network is using a 10Gbit uplink.
C. The virtual machine has 6 vCPUs assigned.
D. The virtual machine has a 1TB VMDK attached.
E. The virtual machine has snapshots present.
【多选题】
Which two statements are true for Predictive DRS? (Choose two.)___
A. It balances resource utilization for virtual machines with unpredictable utilization patterns.
B. It integrates DRS with vRealize Operations Manager to balance workloads for virtual machines before resource utilization spikes occur.
C. It balances resource utilization based on a threshold's algorithm that runs each night.
D. It determines the best placement and balance of virtual machines based on a threshold's algorithm that runs each night in vCenter Server 6.5 Database.
【多选题】
Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose two.)___
A. if a host failover is unsuccessful
B. if a virtual machine was removed from vCenter Server's inventory
C. if a virtual machine was deployed from template, and the template has been deleted
D. if a virtual machine is unregistered directly on the host
【多选题】
Which three requirements are needed to apply RAID 5 or RAID 6 erasure coding on a vSAN 6.2 or 6.5 object? (Choose three.)___
A. on Disk Format 3.0
B. Hybrid vSAN
C. All Flash vSAN
D. vSAN Advanced License
E. Stretched Cluster Configurations
【多选题】
An administrator sees the following error in the log files: Which two events could be the source of the error message? (Choose two.)___
A. vCenter Server failure
B. VXLAN failure
C. Disk array failure
D. Network failure
E. ESXi host failure
【多选题】
An administrator is attempting to access an ESXi host via the DCUI but is unable to do so. Which could be two possible causes? (Choose two.)___
A. The host in Qhas no out-of-band management capability (i.e. iLO/iDRAC).
B. The SSH service is disabled on the host.
C. Strict lockdown mode is enabled on the host.
D. Normal lockdown mode is enabled and the administrator is a member of the
E. xception User list.
【多选题】
Which two permissions are required to migrate a virtual machine with Storage vMotion? (Choose two.)___
A. Network > Move Network
B. Virtual Machine > Inventory > Move
C. Resource > Migrate powered on virtual machine
D. Datastore > Allocate Space
【多选题】
Which are three supported storage requirements for vCenter Server HA? (Choose three.)___
A. NFS
B. RDM
C. vSAN
D. VMFS
E. JBOD
【多选题】
Which are the two network requirements for a VMware vSAN 6.5 cluster? (Choose two.)___
A. Multicast must be enabled on the physical switches and routers that handle vSAN traffic.
B. vSAN requires IPv6 only.
C. All hosts must have a dedicated 40GbE NIC.
D. The vSAN network supported IPv4 or IPv6.
E. vSAN requires IPv4 only.
【多选题】
Which three prerequisites must be in place prior to enabling secure boot for a virtual machine? (Choose three.)___
A. VirtualMachine.Config.Settings privileges
B. an encrypted USB drive
C. Virtual Hardware version 13 or later
D. Virtual Hardware version 12 or later
E. EFI firmware
【多选题】
A user is given the "Virtual machine user (sample)" role in a vSphere 6.x environment. Which three permissions would the user be able to perform? (Choose three.)___
A. Reset a virtual machine.
B. Power on a virtual machine.
C. Move a host into a cluster.
D. Configure CD media.
E. Migrate a virtual machine with Storage vMotion.
【多选题】
Which three are supported upgrade processes for ESXi host? (Choose three.)___
A. using vSphere Auto Deploy
B. using a TFTP server
C. using Update Manager
D. using an
E. SXCLI command
【多选题】
When enabling Storage DRS on a datastore cluster, which three components are enabled as a result? (Choose three.)___
A. Space load balancing among datastore within the datastore cluster.
B. Initial placement for virtual disks based on space and I/O workload.
C. I/O load balancing among datastores within the datastore cluster.
D. Queue Depth alerting on disks within the datastore cluster.
E. Data de-duplication within the datastore cluster.
【多选题】
What are two features introduced in Network I/O Control version 3? (Choose two.)___
A. Bandwidth reservation per traffic type
B. Network resource pools
C. CoS tagging
D. Bandwidth guarantee to virtual machines
【多选题】
Which two correct virtual machine advanced configuration parameters will accomplish this? (Choose two.)___
A. isolation.device.edit.disable = “FALSE”
B. isolation.device.edit.disable = “TRUE”
C. isolation.device.connectable.disable = “FALSE”
D. isolation.device.connectable.disable = “TRUE”
【多选题】
Which three statements are correct regarding booting an ESXi Host from Fibre Channel SAN? (Choose three.)___
A. Direct connect topology is supported.
B. Each host must have its own boot LUN.
C. ESXi hosts do not require local storage.
D. Multipathing to a boot LUN on an active-passive array is supported.
E. Hosts can share one common boot LUN.
【多选题】
Which two tasks should a vSphere administrator perform if the vmkernel log reports VMFS metadata errors? (Choose two.)___
A. contact VMware technical support
B. reformat the datastore
C. check the device with VOMA
D. ignore the messages
【多选题】
Which two statements are true for a vCenterServer user account that is used for vSphere Data Protection (VDP)? (Choose two.)___
A. The user account must be assigned with Administrator role.
B. The password for the user account cannot contain spaces.
C. The user account should be created in the Single Sign-On domain
D. The user account cannot inherit required permissions from a group role.
【多选题】
Which three storage protocols are supported by Virtual Volumes? (Choose three.)___
A. FCIP
B. FCoE
C. iSCSI
D. NFS v3
E. NFS v4
【多选题】
A vSphere administrator observes a CPU spike on one of the web servers (view the Exhibit.) Which two statements can describe the cause of this activity? (Choose two.)___
A. The network packet size is too large.
B. VMware Tools is not installed.
C. Disk latency is present on the datastore.
D. The network packet size is too small.
【多选题】
Which three operations can cause VMFS metadata updates? (Choose three.)___
A. Restarting a VM using the guest OS.
B. Launching a VM console.
C. Migrating a VM with vMotion.
D. Powering a VM on or off.
E. Expanding a VMFS datastore.
【多选题】
*What two services run on all nodes in a vCenter Server HA cluster? (Choose two.)___
A. vmware-vmon
B. vmware-vpostgres
C. vmare-rbd-watchdog
D. vmware-vcha
【多选题】
Which two statements are true regarding Auto Deploy in version 6.5? (Choose two.)___
A. Auto Deploy can be configured and managed via PowerCLI.
B. Auto Deploy can be configured and managed via the vSphere Client.
C. Auto
D. eploy can be configured and managed via the vSphere Web Client.
【多选题】
What three options can improve network performance for a virtual machine? (Choose three.)___
A. MLD
B. TSO
C. NetFlow
D. LRO
E. SR-IOV
【多选题】
Which two storage technologies are supported for MSCS? (Choose two.)___
A. NFS
B. VAAI
C. iSCSI
D. FC
【多选题】
When upgrading a VMware vSAN cluster to version 6.5, which two tasks must be completed to comply with upgrade requirements and VMware-recommended best practices? (Choose two.)___
A. Use RVC to upgrade the hosts.
B. Use the latest available ESXi version.
C. Back up all VMs.
D. Use only the “Full data migration” maintenance mode option.
【多选题】
What two enhancements are in VMFS6 but not in VMFS5? (Choose two.)___
A. Support for 4k native disks
B. Support for 512e disks
C. GPT storage device partitioning
D. Automatic space reclamation
【多选题】
Which two statements describe why a vSphere DRS cluster would report load imbalance? (Choose two.)___
A. The configured migration threshold is too high.
B. The configured migration threshold is too low.
C. DRS is configured for Partially Automated.
D. Enhanced vMotion Compatibility (EVC) is enabled.