【单选题】
Our investigations (调查) ___ something very surprising – many of the employees are underpaid and work overtime all the time.
A. reveal
B. bump
C. rip
D. frustrate
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
She was James’s faithful assistant, in whom he could have ___ confidence.
A. essential
B. automatic
C. ultimate
D. absolute
【单选题】
If you visit this website, you can ___ the categories to find information about all the universities in that area.
A. observe
B. browse
C. glance
D. look
【单选题】
Making New Year’s resolutions (计划) is a custom that still ___ in this country.
A. prevails
B. attaches
C. descends
D. launches
【单选题】
The military officers were more ___ about their own victory and therefore more willing to predict their enemy’s defeat.
A. appropriate
B. ignorant
C. negative
D. optimistic
【单选题】
___ is no doubt that overwork and much worry caused his illness.
A. It
B. There
C. Here
D. This
【单选题】
___ a day goes by that I don’t receive dozens of junk mails in my email box.
A. None
B. Usually
C. Nearly
D. Hardly
【单选题】
Please trust me. Try this new method ___.
A. you feel very relaxed
B. and you feel very relaxed
C. you will feel very relaxed
D. and you will feel very relaxed
【单选题】
John said Mom was coming back tomorrow, not next week. If this is the ___, we’ll all have to clean the house thoroughly.
A. point
B. norm
C. question
D. case
【单选题】
It is far too late for you to go out and play football, ___ the fact that it’s raining.
A. no doubt
B. despite
C. given
D. not to mention
【单选题】
However, under no circumstances should we ___ our achievements, nor should we regard our accomplishments as unimportant.
A. present
B. perceive
C. exemplify
D. exaggerate
【单选题】
Jane picked up a magazine from the bookshelf and started reading here and there ___.
A. accurately
B. randomly
C. emotionally
D. continually
【单选题】
In many Middle Eastern cultures a deadline is taken as a(n) ___, and such terms should not appear in a purchase contract with businessmen from these countries.
A. target
B. favor
C. honor
D. insult
【单选题】
He is by no means a(n) ___ man. On the contrary, he always departs from customs.
A. disgraceful
B. sophisticated
C. traditional
D. intelligent
【单选题】
Although the nuclear radiation problems remain unsolved, the government’s emphasis has been ___ from coal to nuclear.
A. intended
B. defined
C. attached
D. switched
【单选题】
The psychologist doesn’t say directly, but seems to ___ that emotional maturity and self-stimulation are the key elements for success.
A. inquire
B. imply
C. refer
D. confront
【单选题】
The top floors of a building collapsed, trapping a construction worker in the rubble (瓦砾), but he was ___ and could talk to rescuers.
A. reasonable
B. rational
C. innocent
D. conscious
【单选题】
After ___ research by the local government, officials confidently stated that this area of the sea was much safer than before.
A. extensive
B. durable
C. partial
D. extreme
【单选题】
As the world is becoming global, it is increasingly important that countries work together to ___ international trade.
A. soar
B. rise
C. facilitate
D. prompt
【单选题】
As the technology develops, it is probable that electronic books will start to ___ paper books in the near future.
A. ban
B. exchange
C. employ
D. replace
【单选题】
The man was sentenced to 10 years in prison after he was accused of ___ a senior bank official.
A. bribing
B. frustrating
C. chasing
D. eliminating
【单选题】
Youngsters who drink and smoke, and are often absent from school are far more likely to be ___ from school.
A. forbidden
B. induced
C. expelled
D. disobeyed
【单选题】
2006年3月4日，___在一次谈话中指出，在社会主义社会里要树立社会主义荣辱观，教育广大干部群众特别是广大青少年坚持做到“八荣八耻”。
A. 胡锦涛
B. 江泽民
C. 温家宝
D. 李长春
【单选题】
“以服务人民为荣、以背离人民为耻”是社会主义荣辱观的重要内容之一。毛泽东的《为人民服务》这篇著名文章是为一个全心全意为人民服务的普通战士写的悼词，这个普通战士是___。
A. 雷锋
B. 张思德
C. 王杰
D. 白求恩
【单选题】
《礼记•中庸》认为，道德修养应“莫见乎隐，莫显乎微，故君子慎其独也”。这种“慎独”的道德修养方法要求我们在学习“思想道德修养与法律基础”课时要注重___。
A. 学习科学理论
B. 理论联系实际
C. 知行统一
D. 多思考深理解
推荐试题
【单选题】
关于 CVD 涂层，___描述是不正确的。
A. CVD 对高速钢有极强的粘附性
B. CVD 是在 700～1050℃高温的环境下通过化学反应获得的C.CVD 涂层具有高耐磨性
【单选题】
对坐标计算中关于“基点”“节点”的概念下面哪种说法是错误的___。
A. 各相邻几何元素的交点或切点称为节点
B. 各相邻几何元素的交点或切点称为基点C.逼近线段的交点称为节点
【单选题】
已知刀具沿一直线方向加工的起点坐标为（X20，Z-10），终点坐标为（X10，Z20），则其程序是___。
A. G01 X10 W30 F100
B. G01 X-10 Z20 F100
C. G01 X20 Z-10 F100
D. G01 U30 W-10 F100
【单选题】
电机通过联轴器直接与丝杠联接，通常是电机轴与丝杠之间采用锥环无键联接或高精度十字联轴器联接，从而使进给传动系统具有较高的___和传动刚度，并大大简化了机械结构。
A. 传动精度
B. 运行速度
C. 传动位置
D. 传动频率
【单选题】
数控机床进给传动方式有以下几种形式。其中___适用于负载力矩大、需要放大伺服电机输出扭矩的场合。
A. 电动机通过齿轮与丝杆连接
B. 电动机通过联轴器直接与丝杆连接C.电动机通过齿形带与丝杆连接 D.直线电动机直接驱动
【单选题】
数控机床的检测反馈装置的作用是：将其准确测得的___数据迅速反馈给数控装置， 以便与加工程序给定的指令值进行比较和处理。
A. 角位移或直线位移
B. 直线位移
C. 角位移
D. 直线位移和角位移
【单选题】
C.利用磁盘机读入程序 D.从网络通过 Modem 接收程序11250.数控机床加工调试中若遇到问题需停机，应先停止___。
A. 进给运动
B. 辅助运动
C. 主运动
D. 冷却液
【单选题】
请找出下列数控屏幕上菜单词汇的对应英文词汇 SPINDLE.EMERGENCY STOP 、FEED.、COOLANT ___。
A. 主轴、急停、进给、冷却液
B. 冷却液、主轴、急停、进给C.主轴、冷却液、急停、进给 D.进给、主轴、冷却液、急停
【单选题】
关于数控系统的串口通讯，错误的说法是___。
A. 如果数据传输不正常，可以通过拔下数据通讯线进行复位，然后再插上通讯线
B. 确认数控系统串口功能是否已开通
C. 确认上位机软件里的参数设置和数控系统里面的串口参数是否一样
D. 进行串口通讯前，首先检查传输线是否完好
【单选题】
在数控程序传输参数中，“9600E71”，分别代表___。
A. 波特率、奇偶校验、数据位、停止位
B. 数据位、停止位、波特率、奇偶校验C.波特率、数据位、停止位、奇偶校验D.数据位、奇偶校验、波特率、停止位
【单选题】
程序编制中首件试切的作用是___。
A. 检验程序单的正确性，并检查是否满足加工精度要求
B. 检验零件工艺方案的正确性
C. 检验零件图样的正确性
D. 检验数控程序的逻辑性
【单选题】
数控加工的批量生产中，当本道工序定位基准与上道工序已加工表面不重合时，就难以保证本道工序将要加工表面与上道工序已加工表面之间的___。
A. 位置精度
B. 表面质量
C. 尺寸精度
D. 形状精度
