【判断题】
自动闭塞区段,双线双向闭塞设备的车站反方向发出列车时,列车进入区间的行车凭证是列车调度员的命令。
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【判断题】
装有连续式机车信号的列车,遇通过信号机显示停车信号,而机车信号显示允许运行的信号时,应按机车信号的显示运行。
A. 对
B. 错
【判断题】
装有连续式机车信号的列车,遇通过信号机灯光熄灭,而机车信号显示允许运行的信号时,应按地面信号的显示运行。
A. 对
B. 错
【判断题】
半自动闭塞区段,遇超长列车头部越过出站信号机而未压上出站方面的轨道电路发车时,行车凭证为半自动闭塞发车进路通知书。
A. 对
B. 错
【判断题】
两线、多线区间行车使用路票时,应在路票上加盖“××线行车”章。
A. 对
B. 错
【判断题】
双线反方向行车使用路票时,应在路票上加盖“××线行车”章。
A. 对
B. 错
【判断题】
一切电话中断时,禁止发出列车无线调度通信设备故障的列车。
A. 对
B. 错
【判断题】
按封锁区间办法向不应答站发出列车时,该列车应在不应答站的进站信号机外停车,判明不应答原因及准备好进路后,再行进站。司机或车站值班员应将经过情况报告列车调度员。
A. 对
B. 错
【判断题】
单机未完全具备列车条件,所以不按列车办理。
A. 对
B. 错
【判断题】
列车运行中,各有关作业人员应按规定执行车机联控。
A. 对
B. 错
【判断题】
列车司机在列车运行中负责货运票据的交接与保管。
A. 对
B. 错
【判断题】
司机应将列车运行中发生的问题及使用紧急制动阀的情况,及时报告列车调度员。
A. 对
B. 错
【判断题】
改按天气恶劣难以辨认信号的办法行车,遇地面信号与机车信号显示不一致时,应按地面信号机显示运行。
A. 对
B. 错
【判断题】
列车遇到线路塌方、道床冲空等危及行车安全的突发情况时,司机停车后应首先使用列车防护报警装置进行防护。
A. 对
B. 错
【判断题】
列车发生紧急制动停车后,检查车辆技术状态,可继续运行时通知司机开车。
A. 对
B. 错
【判断题】
列车发生紧急制动停车后,车辆乘务员应联系司机,检查车辆技术状态,可继续运行时通知司机开车。
A. 对
B. 错
【判断题】
列车使用紧急制动阀停车后,车辆乘务员应向司机通报使用紧急制动阀的情况,并协助司机处理有关行车事宜。
A. 对
B. 错
【判断题】
登乘机车、动车组司机室的人员,在不影响乘务人员工作的前提下,经检验准许后方可登乘。
A. 对
B. 错
【判断题】
四显示自动闭塞区段通过显示绿黄色灯光的信号机时,应以在前方第二架信号机前能停车的速度运行。
A. 对
B. 错
【判断题】
列车通过减速地点标时,运行速度不得超过25km/h。
A. 对
B. 错
【判断题】
列车进站后,如列车尾部停在警冲标外方或压轨道绝缘时,车站接车人员应使用列车无线调度通信设备等通知司机或显示向前移动的手信号,使列车向前移动。
A. 对
B. 错
【判断题】
进站、接车进路信号机不能使用由引导人员接车时,应在引导员接车地点标处(未设的,引导人员应在进站信号机、进路信号机或站界标内方),显示引导手信号接车。
A. 对
B. 错
【判断题】
出站信号机发生故障时,除按规定交递行车凭证外,对通过列车应预告司机,并显示引导手信号。
A. 对
B. 错
【判断题】
已请求救援的列车,待停车原因消除后可自行开车。
A. 对
B. 错
【判断题】
列车在区间被迫停车,防护人员设置的响墩待停车原因消除后必须及时撤除。
A. 对
B. 错
【判断题】
列车运行途中遇车辆乘务员使用列车无线调度通信设备通知司机列车需限速运行时,司机应根据要求限速运行并报告车站值班员(列车调度员)。
A. 对
B. 错
【判断题】
按施工特定行车办法行车时,列车凭特定引导手信号通过车站。
A. 对
B. 错
【判断题】
按施工特定行车办法行车时,车站不向司机递交书面行车凭证和调度命令,并使用列车无线调度通信设备将行车凭证号码(路票为电话记录号码、绿色许可证为编号)和调度命令号码通知司机,列车凭通过手信号通过车站。
A. 对
B. 错
【判断题】
路用列车进入施工地段时,应在施工防护人员显示的停车手信号前停车,根据施工负责人的要求,按调车办法,进入指定地点。
A. 对
B. 错
【判断题】
列车在区间装卸车时,装卸车负责人应指挥列车停于指定地点。装卸车完毕后,司机确认车门关闭后开车。
A. 对
B. 错
【判断题】
铁路职工或其他人员发现设备故障危及行车和人身安全时,应立即向开来列车发出停车信号,并迅速通知就近车站、工务、电务或供电人员。
A. 对
B. 错
【判断题】
复示信号机以无显示为定位。
A. 对
B. 错
【判断题】
调车信号机在调车车列全部越过调车信号机后自动关闭。
A. 对
B. 错
【判断题】
三显示自动闭塞区段,进站色灯信号机显示一个绿色灯光和一个黄色灯光,准许列车经道岔直向位置,进入站内越过次一架已经开放的信号机准备停车。
A. 对
B. 错
【判断题】
四显示自动闭塞区段,进站色灯信号机显示一个绿色灯光和一个黄色灯光时,准许列车按规定速度经道岔直向位置进入站内,表示次一架信号机经道岔直向位置开放一个绿灯。
A. 对
B. 错
【判断题】
四显示自动闭塞区段的进站信号机在兼作调车信号机时,显示一个月白色灯光,表示准许越过该信号机调车。
A. 对
B. 错
【判断题】
四显示自动闭塞区段,发车进路色灯信号机显示一个绿色灯光,表示该信号机列车运行前方至少有两架信号机经道岔侧向位置在开放状态。
A. 对
B. 错
【判断题】
三显示自动闭塞区段,发车进路色灯信号机显示一个绿色灯光和一个黄色灯光,表示准许列车越过该信号机,表示该信号机列车运行前方次一架信号机在开放状态。
A. 对
B. 错
【判断题】
四显示自动闭塞区段,发车进路色灯信号机显示一个绿色灯光和一个黄色灯光,表示该信号机列车运行前方次一架信号机经道岔侧向位置在开放状态。
A. 对
B. 错
【判断题】
三显示自动闭塞、半自动闭塞、自动站间闭塞区段的发车进路色灯信号机显示相同。
A. 对
B. 错
【判断题】
半自动闭塞区段,通过色灯信号机显示一个绿色灯光,表示准许列车按规定速度运行,运行前方至少有两个闭塞分区空闲。
A. 对
B. 错
推荐试题
【多选题】
When using "Cluster resource percentage" for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)___
A. Total vCPUs assigned to each VM.
B. Average CPU usage on each VM over time.
C. Memory reservations on each VM.
D. Total memory assigned to each VM.
E. Average active memory on each VM over time.
F. CPU reservations on each VM.
【多选题】
Which are four attributes of the Active vCenter HA node? (Choose four)___
A. It uses the vCenter HA network to communicate with the Witness node.
B. It constantly replicates vPostgres data with the Witness node.
C. It uses a public IP address for the management interface.
D. It runs the active vCenter Server Appliance instance.
E. It uses the vCenter HA network for replication of data to the Passive node.
F. It provides a quorum to protect against split-brain situations.
【多选题】
Which are two vCenter Server two-factor authentication methods? (Choose two.)___
A. RSA SecurID
B. Smart Card
C. SAML
D. Symantec VIP
【多选题】
An administrator is creating VMkernel adapters on an ESXi 6.5 host and wants to create separate VMkernel adapters for every type of traffic in the default TCP/IP stack. Which three types of traffic can be explicitly enabled on a separate VMkernel adapter? (Choose three.)___
A. Virtual SAN traffic
B. NFS traffic
C. vMotion traffic
D. vSphere HA traffic
E. Fault Tolerance logging traffic
【多选题】
When migrating a Windows vCenter Server 6.0 to the vCenter Server Appliance 6.5, which two will be migrated by default? (Choose two.)___
A. Local Windows OS users and groups
B. Configuration
C. Custom ports
D. FQDN
E. Historical and Performance data
【多选题】
Which three types of Content Libraries exist within vSphere 6.5? (Choose three.)___
A. Remote Content Library
B. Published Content Library
C. Local Content Library
D. Shared Content Library
E. Subscribed Content Library
【多选题】
An administrator cannot enable multi-processor Fault Tolerance (SMP-FT) for a virtual machine. Which are two possible causes for this? (Choose two.)___
A. The virtual machine is running on a vSAN datastore.
B. The Fault Tolerance network is using a 10Gbit uplink.
C. The virtual machine has 6 vCPUs assigned.
D. The virtual machine has a 1TB VMDK attached.
E. The virtual machine has snapshots present.
【多选题】
Which two statements are true for Predictive DRS? (Choose two.)___
A. It balances resource utilization for virtual machines with unpredictable utilization patterns.
B. It integrates DRS with vRealize Operations Manager to balance workloads for virtual machines before resource utilization spikes occur.
C. It balances resource utilization based on a threshold's algorithm that runs each night.
D. It determines the best placement and balance of virtual machines based on a threshold's algorithm that runs each night in vCenter Server 6.5 Database.
【多选题】
Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose two.)___
A. if a host failover is unsuccessful
B. if a virtual machine was removed from vCenter Server's inventory
C. if a virtual machine was deployed from template, and the template has been deleted
D. if a virtual machine is unregistered directly on the host
【多选题】
Which three requirements are needed to apply RAID 5 or RAID 6 erasure coding on a vSAN 6.2 or 6.5 object? (Choose three.)___
A. on Disk Format 3.0
B. Hybrid vSAN
C. All Flash vSAN
D. vSAN Advanced License
E. Stretched Cluster Configurations
【多选题】
An administrator sees the following error in the log files: Which two events could be the source of the error message? (Choose two.)___
A. vCenter Server failure
B. VXLAN failure
C. Disk array failure
D. Network failure
E. ESXi host failure
【多选题】
An administrator is attempting to access an ESXi host via the DCUI but is unable to do so. Which could be two possible causes? (Choose two.)___
A. The host in Qhas no out-of-band management capability (i.e. iLO/iDRAC).
B. The SSH service is disabled on the host.
C. Strict lockdown mode is enabled on the host.
D. Normal lockdown mode is enabled and the administrator is a member of the
E. xception User list.
【多选题】
Which two permissions are required to migrate a virtual machine with Storage vMotion? (Choose two.)___
A. Network > Move Network
B. Virtual Machine > Inventory > Move
C. Resource > Migrate powered on virtual machine
D. Datastore > Allocate Space
【多选题】
Which are three supported storage requirements for vCenter Server HA? (Choose three.)___
A. NFS
B. RDM
C. vSAN
D. VMFS
E. JBOD
【多选题】
Which are the two network requirements for a VMware vSAN 6.5 cluster? (Choose two.)___
A. Multicast must be enabled on the physical switches and routers that handle vSAN traffic.
B. vSAN requires IPv6 only.
C. All hosts must have a dedicated 40GbE NIC.
D. The vSAN network supported IPv4 or IPv6.
E. vSAN requires IPv4 only.
【多选题】
Which three prerequisites must be in place prior to enabling secure boot for a virtual machine? (Choose three.)___
A. VirtualMachine.Config.Settings privileges
B. an encrypted USB drive
C. Virtual Hardware version 13 or later
D. Virtual Hardware version 12 or later
E. EFI firmware
【多选题】
A user is given the "Virtual machine user (sample)" role in a vSphere 6.x environment. Which three permissions would the user be able to perform? (Choose three.)___
A. Reset a virtual machine.
B. Power on a virtual machine.
C. Move a host into a cluster.
D. Configure CD media.
E. Migrate a virtual machine with Storage vMotion.
【多选题】
Which three are supported upgrade processes for ESXi host? (Choose three.)___
A. using vSphere Auto Deploy
B. using a TFTP server
C. using Update Manager
D. using an
E. SXCLI command
【多选题】
When enabling Storage DRS on a datastore cluster, which three components are enabled as a result? (Choose three.)___
A. Space load balancing among datastore within the datastore cluster.
B. Initial placement for virtual disks based on space and I/O workload.
C. I/O load balancing among datastores within the datastore cluster.
D. Queue Depth alerting on disks within the datastore cluster.
E. Data de-duplication within the datastore cluster.
【多选题】
What are two features introduced in Network I/O Control version 3? (Choose two.)___
A. Bandwidth reservation per traffic type
B. Network resource pools
C. CoS tagging
D. Bandwidth guarantee to virtual machines
【多选题】
Which two correct virtual machine advanced configuration parameters will accomplish this? (Choose two.)___
A. isolation.device.edit.disable = “FALSE”
B. isolation.device.edit.disable = “TRUE”
C. isolation.device.connectable.disable = “FALSE”
D. isolation.device.connectable.disable = “TRUE”
【多选题】
Which three statements are correct regarding booting an ESXi Host from Fibre Channel SAN? (Choose three.)___
A. Direct connect topology is supported.
B. Each host must have its own boot LUN.
C. ESXi hosts do not require local storage.
D. Multipathing to a boot LUN on an active-passive array is supported.
E. Hosts can share one common boot LUN.
【多选题】
Which two tasks should a vSphere administrator perform if the vmkernel log reports VMFS metadata errors? (Choose two.)___
A. contact VMware technical support
B. reformat the datastore
C. check the device with VOMA
D. ignore the messages
【多选题】
Which two statements are true for a vCenterServer user account that is used for vSphere Data Protection (VDP)? (Choose two.)___
A. The user account must be assigned with Administrator role.
B. The password for the user account cannot contain spaces.
C. The user account should be created in the Single Sign-On domain
D. The user account cannot inherit required permissions from a group role.
【多选题】
Which three storage protocols are supported by Virtual Volumes? (Choose three.)___
A. FCIP
B. FCoE
C. iSCSI
D. NFS v3
E. NFS v4
【多选题】
A vSphere administrator observes a CPU spike on one of the web servers (view the Exhibit.) Which two statements can describe the cause of this activity? (Choose two.)___
A. The network packet size is too large.
B. VMware Tools is not installed.
C. Disk latency is present on the datastore.
D. The network packet size is too small.
【多选题】
Which three operations can cause VMFS metadata updates? (Choose three.)___
A. Restarting a VM using the guest OS.
B. Launching a VM console.
C. Migrating a VM with vMotion.
D. Powering a VM on or off.
E. Expanding a VMFS datastore.
【多选题】
*What two services run on all nodes in a vCenter Server HA cluster? (Choose two.)___
A. vmware-vmon
B. vmware-vpostgres
C. vmare-rbd-watchdog
D. vmware-vcha
【多选题】
Which two statements are true regarding Auto Deploy in version 6.5? (Choose two.)___
A. Auto Deploy can be configured and managed via PowerCLI.
B. Auto Deploy can be configured and managed via the vSphere Client.
C. Auto
D. eploy can be configured and managed via the vSphere Web Client.
【多选题】
What three options can improve network performance for a virtual machine? (Choose three.)___
A. MLD
B. TSO
C. NetFlow
D. LRO
E. SR-IOV
【多选题】
Which two storage technologies are supported for MSCS? (Choose two.)___
A. NFS
B. VAAI
C. iSCSI
D. FC
【多选题】
When upgrading a VMware vSAN cluster to version 6.5, which two tasks must be completed to comply with upgrade requirements and VMware-recommended best practices? (Choose two.)___
A. Use RVC to upgrade the hosts.
B. Use the latest available ESXi version.
C. Back up all VMs.
D. Use only the “Full data migration” maintenance mode option.
【多选题】
What two enhancements are in VMFS6 but not in VMFS5? (Choose two.)___
A. Support for 4k native disks
B. Support for 512e disks
C. GPT storage device partitioning
D. Automatic space reclamation
【多选题】
Which two statements describe why a vSphere DRS cluster would report load imbalance? (Choose two.)___
A. The configured migration threshold is too high.
B. The configured migration threshold is too low.
C. DRS is configured for Partially Automated.
D. Enhanced vMotion Compatibility (EVC) is enabled.
【多选题】
A vSphere Administrator must ensure that vCenter Server service is running in a domain user account rather than Local System Account. To accomplish this, the user account should have which two permissions? (Choose two.)___
A. Log on as a service.
B. Act as part of the operating system.
C. Log on as a batch job.
D. Log on locally.
【多选题】
A virtual machine fails to power on after being deployed from a template. What two remediation steps could correct this issue? (Choose two.)___
A. Increase CPU reservation
B. Decrease memory reservation
C. Increase memory reservation
D. Increase datastore capacity
E. Decrease CPU reservation
【多选题】
Which three directories are available under the vcsa-cli-installer folder of the vCenter Server Appliance installation media? (Choose three.)___
A. \mac
B. \ovftool
C. \migration-assistant
D. \win32
E. \lin64
【多选题】
What are three considerations when booting ESXihost from SAN software FCoE? (Choose three.)___
A. The VMware_FCoE_vSwitch that the installer automatically created cannot be changed.
B. Boot LUN cannot be shared with other hosts even on shared storage.
C. Multipathing is not supported at pre-boot.
D. Software FCoE boot configuration cannot be changed from within
E. SXi.
【多选题】
Which two choices are applicable to vSphere Availability? (Choose two.)___
A. Heartbeat Datastores
B. VM Startup/Shutdoown
C. Power Management
D. Admission Control
【多选题】
A user is a member of groups A and B. -VM10 and VM20 are in VM Folder. -Group A is assigned permission “Read-only” on VM Folder. What two configurations will allow the user to edit the settings for only VM10? (Choose two.)___
A. Assign group B permission “virtual machine power user” to VM10.
B. Assign group B permission “virtual machine console user” to VM10.
C. Assign group A permission “virtual machine console user” to VM10.
D. Assign group A permission “virtual machine power user” to VM10.