【单选题】
在蜗轮蜗杆传动机构中,主动件是___。
A. 轴;
B. 蜗杆;
C. 蜗轮;
D. 键。
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
对于闭式的蜗杆在下式传动,浸油深度应为蜗杆的___个齿高。
A. 1.5;
B. l;
C. 2;
D. 2.5。
【单选题】
要使传动的两轴轴线在空间内互相垂直,应采用的传动机构是___。
A. 蜗轮蜗杆;
B. 斜齿轮;
C. 圆锥齿轮;
D. 圆柱齿轮。
【单选题】
既承受弯矩,又承受扭矩的轴为___轴。
A. 传动;
B. 转;
C. 心;
D. 空心。
【单选题】
平衡型机械密封的平衡孔应不偏斜,轴的径向晃动应不大于___。
A. 0.08mm;
B. 0.02mm;
C. 0.05mm;
D. 0.04mm。
【单选题】
连杆用于连接活塞和曲轴,并将活塞的往复运动变成曲轴的___。
A. 直线运动;
B. 旋转运动;
C. 往复运动;
D. 抛物运动。
【单选题】
实际应用中齿轮、皮带轮、联轴器与轴常用___来连接。
A. 螺纹;
B. 螺栓;
C. 键;
D. 棒销。
【单选题】
齿轮、皮带轮、联轴器与轴常用___来连接。
A. 键;
B. 螺纹;
C. 螺栓;
D. 棒销。
【单选题】
普通平键在机械中起着___的作用。
A. 连接;
B. 传递扭矩;
C. 连接和传递扭矩;
D. 紧固定位。
【单选题】
齿轮的齿厚磨损小于原齿厚的___时,应更换。
A. 40%;
B. 70%;
C. 80%;
D. 90%。
【单选题】
每对皮带轮或链轮的主动轴与从动轴的不平行度为___mm。
A. 2;
B. 1;
C. 0.5;
D. 0.1。
【单选题】
皮带轮或链轮检修后要检查其___间的不平行度,应不低于0.5mm/m。
A. 主、从动轴;
B. 主、从动轮面;
C. 主、从动轮缘间;
D. 轴与轴承。
【单选题】
叶轮拨煤机叶轮底面与煤斗台面间误差小于___为合格。
A. 20mm;
B. 15mm;
C. 10mm;
D. 5mm。
【单选题】
按照轴承工作表面的摩擦性质,轴承可分为滑动轴承和___两大类。
A. 调心轴承;
B. 滚动轴承;
C. 向心轴承;
D. 推力轴承。
【单选题】
在运行中滚动轴承的温度不能超过___℃。
A. 80;
B. 90;
C. 100;
D. 120。
【单选题】
___可以同时承受径向载荷和轴向载荷。
A. 推力轴承;
B. 向心轴承;
C. 向心推力轴承;
D. 滚针轴承。
【单选题】
轴承箱应有充足良好的润滑油,在运行中无剧烈振动、无异音、无___。
A. 渗油现象;
B. 发热现象;
C. 窜轴现象;
D. 不确定。
【单选题】
轴承室加润滑脂的数量不应超过其容积的___。
A. 1∕2;
B. l∕3;
C. 1∕4;
D. 2∕3。
【单选题】
在易污染的环境中,低速或中速球和滚子轴承,要把轴承盖里___填满。
A. 全部空间;
B. 全部空间的1∕2~3∕4;
C. 全部空间的1∕4~1∕2;
D. 全部空间的2∕3。
【单选题】
一个完整的液压系统由___。
A. 动力部分、执行部分和工作介质三部分组成;
B. 动力部分、执行部分、控制部分、工作介质和辅助部分组成;
C. 动力部分和执行部分两部分组成;
D. 动力部分、执行部分和控制部分组成。
【单选题】
317液压系统按液流循环方式的不同,可分为___液压传动系统。
A. 开式和闭式;
B. 开式;
C. 闭式;
D. 多级式。
【单选题】
开式系统是指系统中___的油泵从油箱吸油。
A. 接到油箱;
B. 接到进口;
C. 接到低压系统;
D. 接到出口。
【单选题】
在液压传动的基本参数中,流量Q 与速度U 的关系为___,其中A 为面积。
A. U=Q∕A;
B. R=P•A;
C. U=A∕Q;
D. U=Q•A。
【单选题】
液压系统不适合于___要求严格的机械。
A. 方向变化;
B. 润滑;
C. 传动比;
D. 机械传动。
【单选题】
液压执行部分是将___。
A. 机械能转化为液压能;
B. 电能转化为机械能;
C. 液压能转化为机械能;
D. 电能转化为液压能。
【单选题】
液压系统是借助___将功率传送一定距离的系统。
A. 流量;
B. 压力;
C. 转速;
D. 压力油。
【单选题】
容积式液压传动的特点是外部负载越大,其工作压力___。
A. 与外部负载无关;
B. 不变;
C. 越低;
D. 越高。
【单选题】
液压传动___容易控制。
A. 压力方向和流量;
B. 泄漏噪声;
C. 温度;
D. 冲击和振动。
【单选题】
油泵标牌上标注的油量是在___下,油泵的实际流量。
A. 最大压力;
B. 额定压力;
C. 实际压力;
D. 出口压力。
【单选题】
油泵的流量取决于工作空间可变容积的大小,与___无关。
A. 压力;
B. 转速;
C. 时间;
D. 比重。
【单选题】
油泵按流量特性可分为___两种。
A. 定量泵和变量泵;
B. 叶片泵和柱塞泵;C、齿轮泵和叶片泵; D、多级泵和单级泵。
【单选题】
___可调解的泵是变量泵。
A. 排量;
B. 直径;
C. 压力;
D. 方向。
【单选题】
为了提高泵的流量均匀性和运转稳定性,可采用的齿轮泵为___。
A. 正齿轮;
B. 螺旋齿轮或人字齿轮;
C. 蜗轮;
D. 斜齿轮。
【单选题】
齿轮泵在工作过程中有吸油腔和压油腔,这两个油腔就是___。
A. 油缸;
B. 油箱;
C. 密封的工作容积;
D. 都不是。
【单选题】
齿轮泵按工作原理分类,属于___。
A. 容积泵;
B. 离心泵;
C. 叶片泵;
D. 其他。
【单选题】
泵是能量转换装置,它使机械能转变为___。
A. 电能;
B. 热能;
C. 液体压力能;
D. 化学能。
【单选题】
齿轮泵吸油高度一般不大于___。
A. 350mm;
B. 400mm;
C. 500mm;
D. 550mm。
【单选题】
齿轮泵在工作过程中,有吸油腔和压油腔,这两个腔就是___。
A. 密封的工作容积;
B. 油缸;
C. 油箱;
D. 油池。
【单选题】
液压系统的油泵运转安全油温是___℃。
A. 20;
B. 30~55;
C. 70~80;
D. 80~100。
【单选题】
在液压系统中,液体压力来源于___。
A. 油缸;
B. 油泵;
C. 油管;
D. 油箱。
【单选题】
液压系统中的压力大小取决于___的大小。
A. 泵的功率;
B. 液压缸活塞面积;
C. 外载荷;
D. 电机功率。
推荐试题
【多选题】
Which three design requirements must be satisfied to enable RAID-6 objects in a VMware vSAN cluster? (Choose three.)___
A. vSAN Advanced license or higher
B. vSAN stretched cluster
C. at least six hosts contributing storage
D. deduplication and compression
E. all flash configuration
【多选题】
When using "Cluster resource percentage" for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)___
A. Total vCPUs assigned to each VM.
B. Average CPU usage on each VM over time.
C. Memory reservations on each VM.
D. Total memory assigned to each VM.
E. Average active memory on each VM over time.
F. CPU reservations on each VM.
【多选题】
Which are four attributes of the Active vCenter HA node? (Choose four)___
A. It uses the vCenter HA network to communicate with the Witness node.
B. It constantly replicates vPostgres data with the Witness node.
C. It uses a public IP address for the management interface.
D. It runs the active vCenter Server Appliance instance.
E. It uses the vCenter HA network for replication of data to the Passive node.
F. It provides a quorum to protect against split-brain situations.
【多选题】
Which are two vCenter Server two-factor authentication methods? (Choose two.)___
A. RSA SecurID
B. Smart Card
C. SAML
D. Symantec VIP
【多选题】
An administrator is creating VMkernel adapters on an ESXi 6.5 host and wants to create separate VMkernel adapters for every type of traffic in the default TCP/IP stack. Which three types of traffic can be explicitly enabled on a separate VMkernel adapter? (Choose three.)___
A. Virtual SAN traffic
B. NFS traffic
C. vMotion traffic
D. vSphere HA traffic
E. Fault Tolerance logging traffic
【多选题】
When migrating a Windows vCenter Server 6.0 to the vCenter Server Appliance 6.5, which two will be migrated by default? (Choose two.)___
A. Local Windows OS users and groups
B. Configuration
C. Custom ports
D. FQDN
E. Historical and Performance data
【多选题】
Which three types of Content Libraries exist within vSphere 6.5? (Choose three.)___
A. Remote Content Library
B. Published Content Library
C. Local Content Library
D. Shared Content Library
E. Subscribed Content Library
【多选题】
An administrator cannot enable multi-processor Fault Tolerance (SMP-FT) for a virtual machine. Which are two possible causes for this? (Choose two.)___
A. The virtual machine is running on a vSAN datastore.
B. The Fault Tolerance network is using a 10Gbit uplink.
C. The virtual machine has 6 vCPUs assigned.
D. The virtual machine has a 1TB VMDK attached.
E. The virtual machine has snapshots present.
【多选题】
Which two statements are true for Predictive DRS? (Choose two.)___
A. It balances resource utilization for virtual machines with unpredictable utilization patterns.
B. It integrates DRS with vRealize Operations Manager to balance workloads for virtual machines before resource utilization spikes occur.
C. It balances resource utilization based on a threshold's algorithm that runs each night.
D. It determines the best placement and balance of virtual machines based on a threshold's algorithm that runs each night in vCenter Server 6.5 Database.
【多选题】
Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose two.)___
A. if a host failover is unsuccessful
B. if a virtual machine was removed from vCenter Server's inventory
C. if a virtual machine was deployed from template, and the template has been deleted
D. if a virtual machine is unregistered directly on the host
【多选题】
Which three requirements are needed to apply RAID 5 or RAID 6 erasure coding on a vSAN 6.2 or 6.5 object? (Choose three.)___
A. on Disk Format 3.0
B. Hybrid vSAN
C. All Flash vSAN
D. vSAN Advanced License
E. Stretched Cluster Configurations
【多选题】
An administrator sees the following error in the log files: Which two events could be the source of the error message? (Choose two.)___
A. vCenter Server failure
B. VXLAN failure
C. Disk array failure
D. Network failure
E. ESXi host failure
【多选题】
An administrator is attempting to access an ESXi host via the DCUI but is unable to do so. Which could be two possible causes? (Choose two.)___
A. The host in Qhas no out-of-band management capability (i.e. iLO/iDRAC).
B. The SSH service is disabled on the host.
C. Strict lockdown mode is enabled on the host.
D. Normal lockdown mode is enabled and the administrator is a member of the
E. xception User list.
【多选题】
Which two permissions are required to migrate a virtual machine with Storage vMotion? (Choose two.)___
A. Network > Move Network
B. Virtual Machine > Inventory > Move
C. Resource > Migrate powered on virtual machine
D. Datastore > Allocate Space
【多选题】
Which are three supported storage requirements for vCenter Server HA? (Choose three.)___
A. NFS
B. RDM
C. vSAN
D. VMFS
E. JBOD
【多选题】
Which are the two network requirements for a VMware vSAN 6.5 cluster? (Choose two.)___
A. Multicast must be enabled on the physical switches and routers that handle vSAN traffic.
B. vSAN requires IPv6 only.
C. All hosts must have a dedicated 40GbE NIC.
D. The vSAN network supported IPv4 or IPv6.
E. vSAN requires IPv4 only.
【多选题】
Which three prerequisites must be in place prior to enabling secure boot for a virtual machine? (Choose three.)___
A. VirtualMachine.Config.Settings privileges
B. an encrypted USB drive
C. Virtual Hardware version 13 or later
D. Virtual Hardware version 12 or later
E. EFI firmware
【多选题】
A user is given the "Virtual machine user (sample)" role in a vSphere 6.x environment. Which three permissions would the user be able to perform? (Choose three.)___
A. Reset a virtual machine.
B. Power on a virtual machine.
C. Move a host into a cluster.
D. Configure CD media.
E. Migrate a virtual machine with Storage vMotion.
【多选题】
Which three are supported upgrade processes for ESXi host? (Choose three.)___
A. using vSphere Auto Deploy
B. using a TFTP server
C. using Update Manager
D. using an
E. SXCLI command
【多选题】
When enabling Storage DRS on a datastore cluster, which three components are enabled as a result? (Choose three.)___
A. Space load balancing among datastore within the datastore cluster.
B. Initial placement for virtual disks based on space and I/O workload.
C. I/O load balancing among datastores within the datastore cluster.
D. Queue Depth alerting on disks within the datastore cluster.
E. Data de-duplication within the datastore cluster.
【多选题】
What are two features introduced in Network I/O Control version 3? (Choose two.)___
A. Bandwidth reservation per traffic type
B. Network resource pools
C. CoS tagging
D. Bandwidth guarantee to virtual machines
【多选题】
Which two correct virtual machine advanced configuration parameters will accomplish this? (Choose two.)___
A. isolation.device.edit.disable = “FALSE”
B. isolation.device.edit.disable = “TRUE”
C. isolation.device.connectable.disable = “FALSE”
D. isolation.device.connectable.disable = “TRUE”
【多选题】
Which three statements are correct regarding booting an ESXi Host from Fibre Channel SAN? (Choose three.)___
A. Direct connect topology is supported.
B. Each host must have its own boot LUN.
C. ESXi hosts do not require local storage.
D. Multipathing to a boot LUN on an active-passive array is supported.
E. Hosts can share one common boot LUN.
【多选题】
Which two tasks should a vSphere administrator perform if the vmkernel log reports VMFS metadata errors? (Choose two.)___
A. contact VMware technical support
B. reformat the datastore
C. check the device with VOMA
D. ignore the messages
【多选题】
Which two statements are true for a vCenterServer user account that is used for vSphere Data Protection (VDP)? (Choose two.)___
A. The user account must be assigned with Administrator role.
B. The password for the user account cannot contain spaces.
C. The user account should be created in the Single Sign-On domain
D. The user account cannot inherit required permissions from a group role.
【多选题】
Which three storage protocols are supported by Virtual Volumes? (Choose three.)___
A. FCIP
B. FCoE
C. iSCSI
D. NFS v3
E. NFS v4
【多选题】
A vSphere administrator observes a CPU spike on one of the web servers (view the Exhibit.) Which two statements can describe the cause of this activity? (Choose two.)___
A. The network packet size is too large.
B. VMware Tools is not installed.
C. Disk latency is present on the datastore.
D. The network packet size is too small.
【多选题】
Which three operations can cause VMFS metadata updates? (Choose three.)___
A. Restarting a VM using the guest OS.
B. Launching a VM console.
C. Migrating a VM with vMotion.
D. Powering a VM on or off.
E. Expanding a VMFS datastore.
【多选题】
*What two services run on all nodes in a vCenter Server HA cluster? (Choose two.)___
A. vmware-vmon
B. vmware-vpostgres
C. vmare-rbd-watchdog
D. vmware-vcha
【多选题】
Which two statements are true regarding Auto Deploy in version 6.5? (Choose two.)___
A. Auto Deploy can be configured and managed via PowerCLI.
B. Auto Deploy can be configured and managed via the vSphere Client.
C. Auto
D. eploy can be configured and managed via the vSphere Web Client.
【多选题】
What three options can improve network performance for a virtual machine? (Choose three.)___
A. MLD
B. TSO
C. NetFlow
D. LRO
E. SR-IOV
【多选题】
Which two storage technologies are supported for MSCS? (Choose two.)___
A. NFS
B. VAAI
C. iSCSI
D. FC
【多选题】
When upgrading a VMware vSAN cluster to version 6.5, which two tasks must be completed to comply with upgrade requirements and VMware-recommended best practices? (Choose two.)___
A. Use RVC to upgrade the hosts.
B. Use the latest available ESXi version.
C. Back up all VMs.
D. Use only the “Full data migration” maintenance mode option.
【多选题】
What two enhancements are in VMFS6 but not in VMFS5? (Choose two.)___
A. Support for 4k native disks
B. Support for 512e disks
C. GPT storage device partitioning
D. Automatic space reclamation
【多选题】
Which two statements describe why a vSphere DRS cluster would report load imbalance? (Choose two.)___
A. The configured migration threshold is too high.
B. The configured migration threshold is too low.
C. DRS is configured for Partially Automated.
D. Enhanced vMotion Compatibility (EVC) is enabled.
【多选题】
A vSphere Administrator must ensure that vCenter Server service is running in a domain user account rather than Local System Account. To accomplish this, the user account should have which two permissions? (Choose two.)___
A. Log on as a service.
B. Act as part of the operating system.
C. Log on as a batch job.
D. Log on locally.
【多选题】
A virtual machine fails to power on after being deployed from a template. What two remediation steps could correct this issue? (Choose two.)___
A. Increase CPU reservation
B. Decrease memory reservation
C. Increase memory reservation
D. Increase datastore capacity
E. Decrease CPU reservation
【多选题】
Which three directories are available under the vcsa-cli-installer folder of the vCenter Server Appliance installation media? (Choose three.)___
A. \mac
B. \ovftool
C. \migration-assistant
D. \win32
E. \lin64
【多选题】
What are three considerations when booting ESXihost from SAN software FCoE? (Choose three.)___
A. The VMware_FCoE_vSwitch that the installer automatically created cannot be changed.
B. Boot LUN cannot be shared with other hosts even on shared storage.
C. Multipathing is not supported at pre-boot.
D. Software FCoE boot configuration cannot be changed from within
E. SXi.
【多选题】
Which two choices are applicable to vSphere Availability? (Choose two.)___
A. Heartbeat Datastores
B. VM Startup/Shutdoown
C. Power Management
D. Admission Control