【多选题】
A virtual machine fails to power on after being deployed from a template. What two remediation steps could correct this issue? (Choose two.)___
A. Increase CPU reservation
B. Decrease memory reservation
C. Increase memory reservation
D. Increase datastore capacity
E. Decrease CPU reservation
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
CD
解析
暂无解析
相关试题
【多选题】
Which three directories are available under the vcsa-cli-installer folder of the vCenter Server Appliance installation media? (Choose three.)___
A. \mac
B. \ovftool
C. \migration-assistant
D. \win32
E. \lin64
【多选题】
What are three considerations when booting ESXihost from SAN software FCoE? (Choose three.)___
A. The VMware_FCoE_vSwitch that the installer automatically created cannot be changed.
B. Boot LUN cannot be shared with other hosts even on shared storage.
C. Multipathing is not supported at pre-boot.
D. Software FCoE boot configuration cannot be changed from within
E. SXi.
【多选题】
Which two choices are applicable to vSphere Availability? (Choose two.)___
A. Heartbeat Datastores
B. VM Startup/Shutdoown
C. Power Management
D. Admission Control
【多选题】
A user is a member of groups A and B. -VM10 and VM20 are in VM Folder. -Group A is assigned permission “Read-only” on VM Folder. What two configurations will allow the user to edit the settings for only VM10? (Choose two.)___
A. Assign group B permission “virtual machine power user” to VM10.
B. Assign group B permission “virtual machine console user” to VM10.
C. Assign group A permission “virtual machine console user” to VM10.
D. Assign group A permission “virtual machine power user” to VM10.
【多选题】
Which two new vSphere 6.5 features enable an Administrator to locate configuration options when creating or editing host profiles more easily than in previous versions? (Choose two.)___
A. Add the configuration option to favorites.
B. Navigate the option tree.
C. Search for the configuration option.
D. Copy the configuration option from a different profile.
【多选题】
What are the two valid storage controller types for VMs on ESXi 6.5? (Choose two.)___
A. FCoE
B. SATA
C. NVMe
D. iSCSI
【多选题】
Which two options can optimize conversion with VMware Converter? (Choose two.)___
A. Disable real-time antivirus scanners.
B. Remove the source from Active Directory.
C. Remove third-party device drivers.
D. Exclude diagnostic partitions from conversion.
E. Disable Volume Shadow Copy (VSS).
【多选题】
vSphere Availability considers which two factors for virtual machine restarts? (Choose two.)___
A. Host Isolation Response
B. file accessibility
C. NUMA node size
D. resource reservations
【多选题】
Which two virtual NICs support Wake-on-Lan to resume a virtual machine that is in standby mode? (Choose two)___
A. Flexible
B. E1000E
C. E1000
D. vmxnet 3
【多选题】
Which two logs should be examined to troubleshoot a Windows vCenter Server upgrade failure? (Choose two.)___
A. vminst.log
B. vim-um-msi.log
C. firstboot.log
D. pkgmgr.log
【多选题】
Which are two supported storage primitives for VAAI NAS? (Choose two.)___
A. Full File Clone
B. Reserve Space
C. hardware assisted locking
D. block zeroing
【多选题】
Which two parameters must be configured for Windows in-guest disk mirroring? (Choose two.)___
A. scsi#.returnNoConnectDuringAPD = “FALSE”
B. scsi#.terminateVMOnPDL = “TRUE”
C. scsi#.returnBusyOnNoConnectStatus = “FALSE”
D. scsi#.returnNoConnectDuringAPD = “TRUE”
【多选题】
Which two items are required to enable NPIV in a virtual machine? (Choose two.)___
A. use of physical RDMs
B. physical HBA support
C. use of virtual disks
D. hardware version 11 or higher
【多选题】
A vSphere Administrator has VM Component Protection (VMCP) enabled, but the VM was not restarted when one of the VMFS datastores experienced an All Paths Down (APD) failure. What two scenarios would explain why the virtual machine was not restarted? (Choose two.)___
A. VM Monitoring is required in order for VMCP to failover during an APD event.
B. VMware Tools is not installed on the guest operating system for the VM.
C. Insufficient Capacity is available on the failover ESXi hosts.
D. The APD failure was corrected before the VM could be restarted.
【多选题】
What are two requirements in order to restore a Resource Pool Tree from a snapshot? (Choose two.)___
A. vSphere DRS must be turned on.
B. A restore can only be performed on a vSphere DRS cluster within the original vCenter Server.
C. vSphere
D. RS must be turned off.
【多选题】
Which three vSphere features are compatible with vSphere Replication? (Choose three.)___
A. vSphere High Availability
B. vSphere Fault Tolerance
C. vSphere Storage
D. RS
【多选题】
What two VMware Remote Console Options can be defined in the virtual machine settings? (Choose two.)___
A. Boot Delay
B. Maximum number of sessions
C. Guest OS lock
D. Total video memory
【多选题】
VMware Converter can import a powered off virtual machine from which two virtual machine platforms?(Choose two.)___
A. Microsoft Hyper-V
B. Citrix Xen
C. VMware Workstation
D. Linux with KVM
【多选题】
Which two options allow storage space reclamation? (Choose two.)___
A. Use VMFS6 datastores.
B. Use esxcli storage vmfs unmap.
C. Use the SAN console (management tool).
D. Use the vSphere Web Client.
【多选题】
An administrator must reprovision 25 hosts with a new image profile that he has created. Which two methods can the administrator use to change the image profile? (Choose two.)___
A. From the vSphere Web client home page, select the Deploy Rules tab in the Auto Deploy section.
B. Run the Copy-Deploy Rule and specify the Replace Item parameter with Power CLI.
C. From the vSphere Web client home page, select the Assign Rules tab in the Auto
D. eploy section.
【多选题】
What are three parameters for traffic filtering or marking? (Choose three.)___
A. Protocol
B. Traffic Direction
C. DSCP value
D. virtual Port ID
【多选题】
The vSphere administrator must change the path selection policy (PSP) to comply with best practices. Which two interfaces can be used to change the PSP? (Choose two.)___
A. ESXi shell
B. vSphere Client
C. ESXi host client
D. vSphere Web Client
【多选题】
In what two ways can Storage DRS load balance virtual machines? (Choose two.)___
A. anti-affinity rules
B. virtual storage controller
C. guest OS family
D. I/O latency
【多选题】
What two reasons can explain why a host cannot be removed from a vSphere Distributed Switch? (Choose two.)___
A. There are virtual machine network adapters connected to the switch.
B. There are blocked ports on the switch.
C. There are LACP LAGs configured on the switch.
D. There are VMkernel network adapters connected to the switch.
【多选题】
Which three requirements are true for the vCenter Server HA network? (Choose three.)___
A. Network latency between all nodes must be less than 10 milliseconds.
B. IP addresses for all nodes must be static.
C. HA network IP addresses for all nodes can be on different subnets.
D. IP addresses must be on the same network as the management network.
E. A default gateway must be configured.
【多选题】
Which two statements correctly describe Normal Lockdown Mode? (Choose two.)___
A. ESXi Shell and SSH services are independent of lockdown mode.
B. In normal lockdown mode the DCUI service is stopped.
C. ESXi Shell and SSH services are dependent of lockdown mode and cannot be configured.
D. In normal lockdown mode the DCUI service is running.
【多选题】
The Health check feature in the vSphere Distributed Switch helps troubleshoot network connectivity. What three checks does this feature perform? (Choose three.)___
A. Network Utilization
B. MTU
C. Teaming and Failover
D. VLAN
【多选题】
What are the three types of nodes in a vCenterServer HA cluster? (Choose three.)___
A. Master
B. Replica
C. Witness
D. Active
E. Passive
【多选题】
What are two consequences of turning off vSphere DRS on a cluster? (Choose two.)___
A. vMotion capability will be lost.
B. Resource pools will be lost.
C. vApps will be lost.
D. Affinity rules will be lost.
【多选题】
Which two protocols can be used to back up vCenter Server Appliance Instance? (Choose two.)___
A. iSCSI
B. HTTPS
C. FTP
D. NFS
【多选题】
What are two requirements to enable EVC in a vSphere DRS cluster? (Choose two.)___
A. CPU must be in the same family and of the same speed.
B. CPUs must be from the same vendor.
C. EVC must use the lowest possible baseline supported by the hardware.
D. No VMs may be running in the cluster.
【多选题】
In Advanced settings on a vSphere host, Security.Password Quality Control set as retry=3 min=disabled, disabled, disabled, 7, 7 . Which two passwords are valid? (Choose two.)___
A. xQaT3#A
B. P@ssw0rd
C. xQaTEh2
D. Xqat3h!
E. xQaTEhb!
【多选题】
To support Auto-Deploy, which two network requirements must be met? (Choose two.)___
A. IP multicast support
B. IPv4 or IPv6
C. PXE boot
D. 10 GbE networking
【多选题】
A vSphere administrator receives reports of a virtual machine performing extremely slowly, with CPU usage being the suspected bottleneck. After reviewing esxtop (view the Exhibit), which two scenarios could cause a performance problem for the virtual machine? (Choose two.)___
A. A processor affinity is configured for the virtual machine.
B. A virtual machine CPU limit is configured.
C. A virtual machine reservation is configured.
D. A virtual machine memory limit is configured.
E. A virtual machine CPU reservation is configured.
【多选题】
Which three source object types are available for subscription when creating a subscribed content library in vSphere 6.5? (Choose three.)___
A. vSphere 6 library
B. HTTP server
C. vCD 5.5 catalog
D. CIFS repository
E. 3rd-party library
【多选题】
药学服务的主要实施内容正确的是___
A. 医、药、护有机结合,共同承担医疗责任
B. 药学服务只是针对患者个人
C. 协助医护人员制定和实施药物治疗方案
D. 定期对药物的使用和管理进行科学评估
E. 主要是积极参与疾病的治疗,预防和保健则与药学服务关系不大
【多选题】
药学服务的对象包括___
A. 医生
B. 患者及其家属
C. 护士
D. 公众
E. 健康人群
【多选题】
药历的作用有___
A. 客观记录药师为保证患者合理用药所采取的措施
B. 药师解决临床相关问题的技术档案
C. 开展个体化药物治疗的重要依据
D. 保证患者用药安全、经济、有效
E. 便于药师开展药学服务
【多选题】
药历的内容包括___
A. 用药方案和经过
B. 用药指导
C. 药效表现和不良反应
D. 各种实验室检查数据
E. 对患者的健康教育忠告
【多选题】
以下哪些项目必须在药品说明书中注明___
A. 药品通用名、成分、规格
B. 适应症或功能主治
C. 不良反应和注意事项
D. 生产日期和有效期
E. 生产企业和批准文号
推荐试题
【多选题】
机器人单元由以下哪些部分组成___
A. 机器人本体
B. 机器人控制柜
C. 系统软件
D. 输送料道、安全栅栏、安全门及其他周边设备
【多选题】
中频淬火设备使用的冷冻水用于冷却设备的什么部位___
A. 主接触器
B. 感应器
C. 变频器主回路
D. 输出变压器
【多选题】
设备上蓄能器的作用是___
A. 系统保压
B. 缓和冲击压力
C. 吸收脉动压力
D. 应急能源
【多选题】
以下工业品牌中有PLC功能模块产品的是___
A. Siemens
B. Allen-Bradley
C. Schneider
D. FANUC
【多选题】
TPM的目标可以概括为___
A. 停机为零
B. 废品为零
C. 事故为零
D. 产量损失为零
【多选题】
加工中心按结构可分为___
A. 直列
B. 立式
C. 卧式
D. 龙门式
【多选题】
刀具补偿有__和__补偿两种.___
A. 直径
B. 长度
C. 圆弧
D. 半径
【多选题】
数控机床工序的划分原则是___
A. 工序集中
B. 先里后外
C. 工序分散
D. 先面后孔
【多选题】
通常用来检测外圆的量具有___
A. 游标卡尺
B. 内径千分尺
C. 外径千分尺
D. 塞规
【多选题】
数控刀具按工艺分,以下不属于的有哪些___
A. 钻头
B. 内冷式
C. 整体式
D. 减振式
【多选题】
数控机床主要由__和机床本体组成___
A. 控制介质
B. 数控装置
C. 伺服系统
D. 机床附件
【多选题】
切削三要素指的是___
A. 切削速度
B. 进给量
C. 切削用量
D. 背吃刀量
【多选题】
加工中心是一种带__及__的数控机床。___
A. 数控系统
B. 刀库
C. 伺服机构
D. 自动换刀装置
【多选题】
硬质合金是高速切削时常用的刀具材料,它具有___
A. 高硬度
B. 高耐磨
C. 高强度
D. 高耐热
【多选题】
以下属于工艺基准的是___
A. 设计基准
B. 工序基准
C. 定位基准
D. 测量基准
【多选题】
以下具有限制自由度功能的支承是___
A. 浮动支承
B. 可调支承
C. 辅助支承
D. 支撑板
【多选题】
下面属于形状公差的是___
A. 平面度
B. 位置度
C. 圆柱度
D. 面轮廓度
【多选题】
常见的铸件缺陷有哪些___
A. 气孔
B. 砂眼
C. 缩孔
D. 冷隔
【多选题】
C200 PTU装配线齿啮合检查的要求有___
A. 啮合长度
B. 啮合位置
C. 啮合形状
D. 啮合亮度
【多选题】
在工装夹具设计时,有些摩擦是有益的,有些摩擦是有害的。减少有害机械摩擦的主要措施有哪些___
A. 合理选择配对使用摩擦副的材料
B. 确定零件表面合理的粗糙度值
C. 使用润滑油和有极压作用的添加亮晶剂,在摩擦表面生成边界膜
D. 以滚动接触代替滑动接触
【多选题】
冷挤压加工渐开线花键时对累积分度误差超差影响的因素有哪些___
A. 毛坯的跳动
B. 毛坯的材质硬度不均
C. 搓齿板定位面相对毛坯中心的对称度
D. 预搓直径较小
【多选题】
下列属于位置公差的有___
A. 同轴度
B. 圆度
C. 圆柱度
D. 圆跳动
【多选题】
中频感应加热淬火后发现表面硬度整体偏低的可能原因___
A. 零件表面脱碳
B. 冷却速度不足
C. 发生自回火
D. 加热温度不够
【多选题】
外星轮外花键加工难易程度与下列那些因素有直接关系___
A. 花键两针距公差
B. 花键有效长度
C. 起淬点位置要求
D. 硬化层深度要求
【多选题】
固定节可拆卸和不可拆卸结构压入反拉程序动作设置为___
A. 可拆卸式:压入-反拉-压入
B. 可拆卸式:压入-反拉
C. 不可拆卸式:压入-反拉
D. 不可拆卸式:压入-反拉-压入
【多选题】
固定节油脂第一枪油脂量正确的是___
A. 高于球笼端面
B. 低于内星轮端面
C. 低于外星轮碗口端面
D. 高于钢球中心
【多选题】
整体式夹箍控制方式是___
A. 压力控制
B. 电流控制
C. 位移控制
D. 电压控制
【多选题】
影响摩擦焊的关键参数是___
A. 摩擦转速和摩擦时间
B. 摩擦压力和顶锻压力
C. 车焊缝的速度
D. 以上均是
【多选题】
花键齿根圆弧超差___
A. 可以通过垫片调整至合格
B. 可以通过调整搓齿板至合格
C. 只能换新搓齿板至首件合格
D. 可以修磨搓齿板后至首件合格
【多选题】
固定节与实轴花键配合松会产生的产品和工艺问题是___
A. 固定节与实轴花键压入力小于产品和工艺要求
B. 造成传动轴总成装配困难
C. 造成传动轴总成轴向间隙超差
D. 造成传动轴总成固定节滚动距超差
【多选题】
变速箱端密封挡外圆可以采用的机加工方式是___
A. 铣削
B. 磨削
C. 车削+抛光
D. 刮削+抛光
【多选题】
以下哪些材料加工的零件淬火后不需要回火___
A. XC45
B. 38B3
C. UC1
D. UC2
【多选题】
固定节装配扭矩大,超出工艺要求,如果是外星轮问题,从哪几个方面入手检查寻找原因___
A. 球道直径小超差
B. 内球面直径小超差
C. 球道与球面中心高超差
D. 球道直径大超差
【多选题】
外星轮柄部螺纹退刀槽作用___
A. 减轻螺纹重量
B. 减少螺纹柄部尺寸
C. 为搓螺纹时材料有挤压流向,提高螺纹刀寿命
D. 方便控制螺纹的有效长度
【多选题】
SDS零件使用的碳钢材料晶格有哪几种形式___
A. 面心立方
B. 体心立方
C. 密排六方
D. 密排立方
【多选题】
有3块直径为φ3mm的45号钢样品,退火后的组织是铁素体+珠光体,45号钢的AC3温度是780℃。将其分别加热不同温度并保温,然后水冷,各得到的组织是___
A. 加热温度700℃水冷后的组织是铁素体+珠光体
B. 加热温度760℃水冷后的组织是马氏体+铁素体
C. 加热温度840℃水冷后的组织是马氏体
D. 加热温度940℃水冷后的组织是马氏体
【多选题】
热处理淬火时冷却速度对零件的影响为___
A. 工件淬火冷却速度过低,达不到零件的硬度和金相组织要求
B. 工件淬火冷却速度过高,零件更易变形和开裂
C. 工件淬火冷却速度过低,零件更易变形和开裂
D. 工件淬火冷却速度过高,达不到零件的硬度和金相组织要求
【多选题】
金属材料热处理的目的为___
A. 热处理加热温度
B. 热处理加热能量
C. 改变金相组织
D. 根据需要改变原子的排列组合
【多选题】
数控设备运行的方式有___
A. Auto
B. JOG
C. MDA
D. HND
【单选题】
关于产品质量监督抽查的说法,正确的是___
A. 监督抽查的样品,应从企业生产线上随机抽取
B. 监督抽查必须以产品标准作为判定依据
C. 监督抽查所需费用由被抽查企业支付
D. 国家监督抽查的产品,地方不得重复抽查