【单选题】
Which STP feature can prevent an attacker from becoming the root bridge by immediately shutting down the interface when it receives a BPDU?___
A. root guard
B. Port Fast
C. BPDU guard
D. BPDU filtering
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
Which technology can best protect data at rest on a user system?___
A. full-disk encryption
B. IPsec tunnel
C. router ACL
D. network IPS
【多选题】
Which two primary security concerns can you mitigate with a BYOD solution ?___
A. schedule for patching the device
B. securing access to a trusted corporate network
C. compliance with applicable policies
D. connections to public Wi-Fi networks
E. device tagging and invento
【多选题】
choose five___
A. MD5————————inserure
B. DES————————insercure
C. SDES———————legacy
D. SHA-1———————legacy
E. HMAC-MD5—————legacy
【多选题】
Which two characteristics of symmetric encryption are true?___
A. It uses digital certificates
B. It requires more resources than asymmetric ancryption
C. It uses the same key to enctypt and decrupt traffic
D. It uses a public key and a pricate key to encrypt and decrypt traffic.
E. It is faster than asymmetric encryption
【多选题】
which two characteristics of PVLAN are true?___
A. Promiscuous porta can communicate with PVLAN ports.
B. Isolated ports cannot communicate with other ports on the same VLAN
C. Community ports have to be a part of the trunk.
D. They require VTP to be enabled in server mode
E. PVLAN ports can be configured as Ether Channel ports
【多选题】
What are two options for running Cisco SDM?___
A. Running SDM from a mobile device
B. Running SDM from within CiscoWorks
C. Running SDM from a router's flash
D. Running SDM from the Cisco web porta
E. Running SDM from a PC
【多选题】
Which two options are the primary deployment modeles for mobile device management?___
A. multisite
B. cloud-based
C. on premises
D. hybrid cloud basedo
E. single site
【多选题】
Drag the recommendation on the left to the Cryptographic algorithms on the right, Options will be used more than once.___
A. Avoid——————————————DES,MD5
B. Legacy——————————————SDES,SHA1,HMAC-MD5
【多选题】
Which two are valid types of vLans using PVLANS ?___
A. Community VLAN
B. Backup VLAN
C. Secondary VLAN
D. Isolated VLAN
E. Isolated VLAN
【多选题】
Which two commands are used to implement Resilient lOS Configuration ___
A. Secure boot-config
B. copy running-config tftp
C. copy flash:ios bin tftp
D. copy running-config startup-config
E. secure boot-image
【多选题】
Which two types of firewalls work at layer 4 and above ?___
A. Stateful inspection
B. Network Address Translation
C. Circuit-Level gateway
D. Static packet filter
E. Application Level firewall
【多选题】
Which two default settings for port security are true ?___
A. Violation is Protect
B. Violation is Restrict
C. Violation is Shutdown
D. Maximum number of MAC addresses is 2
E. Maximum number of MAC addresses is 1
【多选题】
Which two are characteristics of RADIUS?___
A. Uses UDP ports 1812 /1813
B. Uses TCP port 49
C. Uses UDP port 49
D.
E. ncrypts only the password between user and server
【多选题】
When setting up a site-to-site VPN with PSK authentication on a Cisco router, which two elements must be configured under crypto map?___
A. pfs
B. nat
C. reverse route
D. peer
E. transform-set
【多选题】
When using the Adaptive Security Device Manager(ASDM), which two options are available to add a new root certificate?___
A. Install from SFTP server
B. Usehttps
C. Install from a file
D. Use LDAP
E. Use SCEP
【多选题】
Which two SNMPv3 services support its capabilities as a secure networ k manage protocol? ___
A. access control
B. the shared secret key
C. authentication
D. authorization
E. accounting
【多选题】
Which two statements about routed firewall mode are true ?___
A. The firewall acts as a routed hop in the network
B. This mode conceals the presence of the firewall
C. The firewall requires a unique iP address for each interface
D. This mode allows the firewall to be added to an existing networ k with minimal additional configuration By default, this mode permits most traffic to pass throug
【多选题】
Which two statements describe DHCP spoofing attacks?___
A. They are used to perform man-in- the-middle attacks
B. They can access most network devices
C. They can modify the flow of traffic in transit. LNGKAIG
D. They protect the identity of ti attacker by masking the DHCP address
E. They can physically modify the network gateway
【多选题】
Which two types of VLANs using PVLANs are valid?___
A. isolated
B. promiscuous
C. backup
D. secondary
E. community
【多选题】
What are two limitations of the self-zone policies on a zone-based firewall?___
A. They are unable to block Https traffic
B. They restrict SNMP traffic.
C. They are unable to support Https traffic
D. They are unable to implement application inspection
E. They are unable to perform rate limiting
【多选题】
Which two descriptions of TACACS+ are true? ___
A. The TACACS+ header is unencrypted
B. It combines a uthentication and authorization
C. It uses TCP as its transport protocol
D. Only the password is encrypted.
E. It uses UDP as its transport protocol.
【多选题】
Which two actions does an IPS perform? ___
A. it spans the traffic
B. it reflects the traffic back to the sender
C. it encrypts the traffic
D. it terminates the user session or connection of the attacker
E. it reconfigures a device to block the traffic
【多选题】
In which form of fraud does an attacker try to learn information such as login credenti account information by ma squerading as a reputable entity or person in email, IM or communication channels ?___
A. phishing
B. Smurfit
C. Hacking
D. Identity Spoofing
【多选题】
Which two ESA services are available for incoming and outgoing mails ?___
A. anti-DoS
B. reputation filter
C. antispam
D. content filter
E. DLP
【多选题】
What are two reasons to recommend SNMPv 3 over SNMPv2?___
A. SNMPv3 is secure because you can configure authe ntication and privacy
B. SNMPv3 is insecure because it send in formation in clear text
C. SNMPv2 is insecure because it send information in clear text
D. SNMPv3 is a Cisco proprietary protocol
E. SNMPv2 is secure because you can configure authentication and privacy
【多选题】
Which two actions can a zone- based firewall apply to a packet as it transits a zone pair?___
A. drop
B. inspect
C. queue
D. quarantine
【单选题】
Which security principle has been violated if data is altered in an unauthorized manner?___
A. accountability
B. confidentiality
C. availability
D. integrity
【单选题】
Which IKE Phase 1 parameter can you use to require the site-to-site VPN to use a pre-shared ?___
A. encryption
B. authentication
C. group
【单选题】
Which command successfully creates an administrative user with a password of "cisco"on a Cisco router?___
A. username Operator privilege 7 password cisco
B. username Operator privilege 1 password cisco
C. username Operator privilege 15 password cisco
D. username Operator password cisco privilege 15
【单选题】
Which EAP method authenticates a client against Active Directory without the use of client-side 802.1X certificates?___
A. EAP-TLS
B. EAP-MSCHAPv2
C. EAP-PEAP
D.
E. AP-GTC
【单选题】
What is a limitation of network-based IPS?___
A. It must be in dividually configured to support every operating system on the network.
B. It is most effective at the in dividual host level
C. It is unable to monitor attacks across the entire netw ork
D. Large installations require numerous sensors to fully protect the network
【单选题】
When would you configure the ip dhcp snooping trust command on a sw itch?___
A. when the switch is connected to a DHCP server
B. when the switch is working in an edge capacit
C. when the switch is connected to a client system
D. when the switch is serving as an aggregator
【单选题】
How does the 802. 1x supplicant communicate with the authentication server?___
A. The supplicant creates EAP packets and sends them to the authenticator, which encapsulates them into RADIUS and forwards them to the authentication server.
B. The supplicant creates RADIUS packets and sends them to the authe nticator, which encapsulates the m into EAP and forwards them to the a uthentication server.
C. The supplicant creates RADIUS packets and sends them to the authenticator, which translates them into eap and forwards them to the a ut hentication server
D. The supplicant creates
E. AP packets and sends them to the authe nticator, which translates them into radius and forwards them to the authentication server.
【单选题】
Which command do you enter to verify the phase I status of a VPN connection?___
A. sh crypto se ssion
B. debug crypto isakmp
C. sh crypto isakmp sa
D. sh crypto ipsec sa
【单选题】
Refer to the exhibit. what is the e ffect of the given configuration?___
A. It enables authentication,
B. It prevents keychain authentication.
C. The two routers receive normal updates from one another.
D. The two device s are able to pass the message digest to one another.
【单选题】
Which command can you enter to configure OSPF to use hashing to authenticate routing updates?___
A. ip ospf aut hentication message-digest
B. neighbor 192 168.0 112 cost md5
C. ip ospf priority 1
D. ip ospf aut hentication-key
【单选题】
Which command can you enter to verify the status of Cisco lOS Resilient Configuration on a Cisco router?___
A. show secure bootset
B. secure boot-image
C. show binary file
D. ure boot-config
【单选题】
A user on your network inadvertently activates a botnet program that was received as an emai attachment. Which type of mechanism does Cisco Firepower use to detect and block only the botnet attack?___
A. network-based access control rule
B. reputation-based
C. user-ba sed access control rule
D. botnet traffic filter
【单选题】
What does the policy map do in CoPP?___
A. defines service parameters
B. defines packet selection parameters
C. defines the packet filter
D. define s the action to be performed
【单选题】
How is management traffic isolated on a Cisco ASR 1002?___
A. Traffic isolation is done on the vlan level
B. There is no management traffic isolation on a Cisco ASR 1002
C. Traffic is isolated based upon how you configure routing on the device
D. The management interface is configured in a special vRF that provides traffic isolation from the default routing table
推荐试题
【单选题】
下列___适合盛装易燃液体。
A. 玻璃容器
B. 瓷器
C. 具有防腐功能的金属容器
【单选题】
在下列三种材料中,空气等离子弧切割更适用于___。
A. 低合金钢
B. 不锈钢
C. 铝及铝合金
【单选题】
置换焊补时,必须保证盲板有足够的___
A. 塑性
B. 硬度
C. 强度
【单选题】
氢氧化钠不溶于___
A. 甘油
B. 乙醇
C. 丙酮
【单选题】
可燃物质在混合物中发生爆炸的最低浓度称为___
A. 爆炸极限
B. 爆炸下限
C. 爆炸上限
【单选题】
金属材料在破坏前所承受的最大拉应力,叫作材料的___
A. 屈服强度
B. 抗拉强度
C. 抗剪强度
【单选题】
当焊接热导率高的原材料属材料(如铝、铜)时,可以考虑选用有较高热穿透性的___
A. 氩气
B. 氮气
C. 氦气
【单选题】
压力焊是利用焊接时施加一定___而完成的焊接方法
A. 热能
B. 电能
C. 压力
【单选题】
由于二氧化碳气体保护堆焊属于明弧焊接,因此要防止___
A. 有害气体产生
B. 火灾发生
C. 弧光伤害
【单选题】
埋弧焊焊接时,采用的焊丝较细的是___
A. 自动埋弧焊
B. 氩弧焊
C. 半自动埋弧焊
【单选题】
下列选项中在职业病诊断时不需要考虑的因素是___
A. 职业病危害接触史
B. 临床表现和医学检查结果
C. 劳动者家庭背景
【单选题】
高碳钢比低碳钢的焊接性___
A. 好
B. 相差不大
C. 差
【单选题】
在焊接中碳钢和某些合金钢时,热影响区中可能发生淬火现象而变硬,易形成___
A. 热裂纹
B. 气孔
C. 冷裂纹
【单选题】
焊机因受到___,容易造成焊机漏电:
A. 振动
B. 撞击
C. 振动和撞击
【单选题】
矽肺是___引起的严重的职业病
A. 生产性粉尘
B. 生产性毒物
C. 苯
【单选题】
埋弧焊的焊接速度___
A. 大
B. 小
C. 一般
【单选题】
下列切削性能好的金属材料是___
A. 镁合金
B. 灰铸铁
C. 铝合金
【单选题】
与其他铜合金相比,机械性能和物理性能都较好的是___
A. 白铜
B. 黄铜
C. 青铜
【单选题】
719不属于置换焊补时常用的置换介质的是___
A. 氮气
B. 水蒸气
C. 氧气
【单选题】
激光切割操作时,戴激光防护面罩主要是用于防___
A. 红外激光
B. 可见光
C. 紫外激光
【单选题】
关于二氧化碳焊短路过渡焊接以下说法错误的是___。
A. 焊枪移动过快,易引起焊缝两则咬边,而且保护气体向肛拖,影响保护效果
B. 焊速过慢,易产生烧穿和焊缝组织变粗的缺陷
C. 保护气流越大,保护效果越好
【单选题】
耳塞属于___。
A. 噪声防护用品
B. 助听防护用品
C. 听觉防护用品
【单选题】
焊条电弧焊安全操作技术规定___禁止露天作业
A. 雨天
B. 阴天
C. 雾天
【单选题】
室内或室外使用乙炔瓶时,必须直立放置,严禁___放。
A. 卧
B. 竖
C. 倾斜
【单选题】
对人体来说最危险的电流频率是___Hz
A. 50
B. 200
C. 500
【单选题】
当其他焊接参数不变时,焊丝直径增大,堆焊焊缝的宽度___.
A. 不变
B. 增加
C. 减少
【单选题】
焊机着火首先应拉闸断电,然后再灭火,在未断电前不能用___
A. 二氧化碳灭火器
B. 水
C. 干粉灭火器
【单选题】
我国现行的消防法规体系不包括___
A. 消防法律
B. 消防法规
C. 刑事法规
【单选题】
下列关于职业健康检查的作用说法错误的是___
A. 检索和发现职业危害易感人群
B. 为行政执法提供证据
C. 可杜绝职业危害
【单选题】
在有风的环境中焊接时,下列焊接方法中保护效果最好的是___
A. 压煜
B. 手工电弧焊
C. 埋弧焊
【单选题】
下列关于酸的描述正确的是___
A. 一元酸
B. 二元酸
C. 三元酸
【单选题】
电渣焊空载电压不能超过___V
A. 50
B. 60
C. 70
【单选题】
安全规程规定___大风时不得登高焊割作业。
A. 5级以上
B. 6级以上
C. 8级以上
【单选题】
在焊接不锈钢时,氧气和氩气混合保护气体中氧气的体积分数宜为___
A. 1%-5%
B. 5%-10%
C. 3%-6%
【单选题】
在气焊气割工艺中,关于切割速度的说法正确的是___
A. 随氧气纯度的增高而降低
B. 随割件厚度的增加而减小
C. 切口后拖量较大时,应增大切割速度
【单选题】
电子束焊设备应装置专用地线,且接地电阻应小于___Ω。
A. 3
B. 4
C. 5
【单选题】
737焊补燃料容器和管道的常用安全措施有两种,称为___
A. 置换焊补、带压置换焊补
B. 置换焊补、带压不置换焊补
C. 大电流焊补、带料焊补
【单选题】
登高焊割严禁将焊接电缆或气焊、气割的橡皮管___
A. 放在身上
B. 缠绕在身上
C. 放在操作点上
【单选题】
___焊接工艺属于压焊
A. 电渣焊
B. 埋弧焊
C. 电阻焊
【单选题】
LU-150型等离子弧粉末堆焊机的组成部分不包括___
A. 出机架
B. 控制箱
C. 堆焊机