【单选题】
What is the main purpose of Control Plane Policing？___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
Which attack can be prevented by OSPF authentication？___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning？___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5， but does not use encryption？___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist， using security intelligence to block illicit network activity. However， the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites？___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat（ins，any）dynamic interface】Which ty pe of NaT is configured on a Cisco ASA？___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network？___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration？___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS？___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security？___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true？ ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication，authorization，and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10？___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center？___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true？___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed？___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
24．对于工作环境恶劣、启动频繁的异步电动机，所用热继电器热元件的额定电流可选为电动机额定电流的___倍。
A. 0.95~1.05
B. O.85~0.95
C. 1.05~1.15
D. 1.15~1.50
推荐试题
【单选题】
静变流机的功用是什么？___
A. 将28V直流电转换为115V变频交流电
B. 将28V直流电转换为115V恒频交流电
C. 将电瓶1的28V直流电转换为115V、400HZ单相交流电
D.
【单选题】
当电子舱出现烟雾时，按压应急电源控制面板上的“GEN1LINE”按钮后，下列说法正确的是___
A. 闭合GLC1(GENLINECONTACTOR),左右＃1燃油泵由ACBUS1直接供电断开
B. 断开GLC1(GENLINECONTACTOR),左右＃1燃油泵由IDG#1直接供电
C. 闭合BTC1(BUSTIECONTACTOR),左右＃1燃油泵由ACBUS1直接供电断开
D.
【单选题】
IDG的速度调节是如何实现的？___
A. IDG控制不同的输入速度，并调节输出速度
B. GCU控制不同的输入速度，并调节输出速度
C. GCU监控PMG的频率并控制伺服valve
D.
【单选题】
当GEN1LINE按钮按出后，会产生什么结果？___
A. 闭合GLC1并且燃油泵由ACNORMALBUS供电
B. 断开GLC1并且燃油泵由GEN1供电
C. 闭合BTC并且燃油泵由ACNORMALBUS供电
D.
【单选题】
当GEN1、GEN2接入电网后，什么情况下GEN1FAULT灯燃亮？___
A. 当GEN1LINE按钮按出后
B. 当GEN1的任一参数不正确时
C. 当GEN1的任一参数不正确并且GEN1按钮按出后
D.
【单选题】
在飞机电网正常供电时，按钮ACESSFEED按钮后会发生什么情况？___
A. ACESSBUS由应急发电机供电
B. ACESSBUS由ACBUS1供电
C. ACESSBUS由ACBUS2供电
D.
【单选题】
当外部电源接入飞机电网时，外部电源插座附近的指示灯如何指示？___
A. NOTINUSE灯和AVAIL灯均燃亮
B. NOTINUSE熄灭和AVAIL灯燃亮
C. NOTINUSE灯和AVAIL灯均熄灭
D.
【单选题】
当维护回流条开关接通后，若TR2失效后，下列说法正确的是：___
A. 交直流的GROUND/FLIGHT(GND/FLT)汇流条均没有电
B. 只有直流的GROUND/FLIGHT(GND/FLT)汇流条有电
C. 交直流的GROUND/FLIGHT(GND/FLT)汇流条依然有电
D.
【单选题】
增强型电源系统是如何同MCDU相连？___
A. 直接通过每一个GCU
B. 通过GAPCU和CFDIU
C. 通过CFDIU同EGIU(ELECTRICALGENERATIONINTERFACEUNIT)
D.
【单选题】
当电源控制面板上GEN1按钮在关位时会出现什么情况？___
A. 1号和2号交流汇流条没有电并且应急发电机自动连接
B. 1号交流汇流条因1号发电机不起作用而由2号发电机供电
C. 1号交流汇流条因1号发电机网路继电器在断开位而由2号发电机供电
D. 1号交流汇流条没有电因为1号GEN1继电器在断开位并且转换接触器没有闭合
