【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
推荐试题
【单选题】
《安全生产法》立法目的是为加强安全生产监督管理，防止和减少___，保障人民群众生命和财产安全，促进经济发展。
A. 生产安全事故
B. 伤亡事故
C. 安全生产事故
D. 各种事故
【单选题】
下述___不是生产经营单位主要负责人对本单位安全生产工作应负的职责。
A. 组织制定本单位安全生产规章制度和操作规程；
B. 对新改扩建项目进行劳动安全卫生预评价；
C. 保证本单位安全生产投入的有效实施
D. 及时、如实报告生产安全事故。
【单选题】
下述中___不是从业人员的权利。
A. 拒绝违章指挥和强令冒险作业；
B. 接受安全生产教育和培训；
C. 因生产安全事故受到损害后享受工伤社会保险；
D. 发现直接危及人身安全的紧急情况时，停止作业
【单选题】
根据《安全生产法》的规定，生产经营单位的主要负责人未按有关规定保证安全生产所需的资金投入，导致发生生产安全事故，尚不够刑事处罚的，对企业主要负责人应当给予___的处分。
A. 罚款
B. 降职
C. 撤职
D. 开除
【单选题】
根据《安全生产法》的规定，生产经营单位进行爆破、吊装等危险作业，应当安排专门人员进行现场___，确保操作规程的遵守和安全措施的落实。
A. 安全评估
B. 安全管理
C. 安全监察
D. 设施检测
【单选题】
依据《职业病防治法》的规定，新建、扩建、改建建设项目和技术改造、技术引进项目可能产生职业病危害的，建设单位在___阶段应当向卫生行政部门提交职业病危害预评价报告。
A. 可行性论
B. 初步设计
C. 施工建设
D. 竣工验收
【单选题】
人的感知电流是指电流通过人体时，引起人有发麻感觉及轻微针刺感的最小电流。就工频电流有效值而言，人的感知电流约为___mA。
A. 0.1～0.2
B. 0.5～1
C. 10～100
D. 200～300
【单选题】
公司___至少召开一次安全生产工作会议，听取各单位安全生产情况汇报，检查年度安全工作部署完成情况，讨论决定安全工作中的重大问题和应采取的措施。
A. 每周
B. 每月
C. 每季度
D. 每半年
【单选题】
新建、改建、扩建工程项目落实安全防火设施与主体工程___的“三同时”规定
A. 同时设计、同时验收、同时投产
B. 同时检查、同时验收、同时投产
C. 同时设计、同时验收、同时检查
D. 同时设计、同时检查、同时投产
【单选题】
新员工上岗前，必须经过___，对本岗位的安全规定要做到能讲会用，并严格执行，单独上岗前，必须经过考试合格，否则不允许上岗。
A. 安全培训
B. 安全考核
C. 安全检查
D. 安全教育
【单选题】
下列说法错误的是：___
A. 岗位人员要做到持证上岗，并按规定穿戴劳动保护用品，严禁赤膊、赤脚或穿钉子鞋上岗
B. 严格执行生产调度令和操作票制度，按操作规程进行流程切换和站场设备启停操作
C. 员工要熟知本岗位的重点部位、重点设备和危险点
D. 严格执行操作规程，无操作票可以进行操作，操作结束后补填。熟练掌握预防事故的具体措施和事故处理的应急方案
【单选题】
强化安全教育，按要求开展好至少___一次的安全活动，每次活动的时间、内容都要按上级的要求并结合本站的实际情况进行，并做好活动记录。
A. 每周
B. 每月
C. 每季度
D. 每半年
【单选题】
下列说法错误的是：___
A. 不得随意操作任何设备。未经允许，禁止非站队运行人员擅自进入生产区域，以防发生事故。
B. 施工现场要设有安全禁区，明显标志，夜间设绿灯示禁。
C. “安全生产，人人有责”，员工有权拒绝违章指挥和纠正不安全行为，任何人不准强令职工违章作业。
D. 各项设备要定期做好检维修管理工作，确保设备处于完好可用的状态。
【单选题】
下列不属于一级动火作业的是___
A. 在运行天然气管道上的焊、割动火作业。
B. 在发电机厂房内及受限空间的天然气管道及附属设备上动火。
C. 在运行天然气管道附近动火，如发生危险将直接影响正常输气生产的动火作业。
D. 在运行天然气管道上的打磨作业
【单选题】
关于动火作业人员，下列说法错误的是：___
A. 动火人员是动火施工具体操作者，焊工、电工、起重工等特种设备作业人员必须持证上岗。
B. 服从动火负责人指挥，对动火安全不负操作责任，严格执行动火操作规程和技术措施，必须遵守生产单位安全制度。
C. 按规定穿戴劳动防护用品，正确使用动火设备。
D. 掌握作业风险，熟悉应急预案和自我保护技能
【单选题】
在动火作业前，按《动火作业方案》核实动火部位、动火时间并确认动火手续齐全，接到动火指令后，确认各项安全措施已落实，在___和（A）均在场的情况下，方能动火。
A. 监护人、监督人。
B. 动火单位负责人、动火地点负责人
C. 施工单位、公司相应部门
D. 动火单位负责人、监护人
【单选题】
下列说法错误的是___
A. 一张《动火作业票》只限一处使用
B. 在动火过程中，发现不能保证动火安全时，有权停止动火，待隐患整改后方能继续动火。
C. 紧急情况下的动火作业经请示公司主管领导批准后方可进行动火作业
D. 不与站内管线、设备连接的工艺预制安装动火作业属于二级动火
【单选题】
进有限空间动火作业，还须遵守相关进入有限空间作业的安全管理规定，受限空间内动火，必须使用两个以上可燃气体检测仪连续检测，发现临近超过许可作业浓度指标，应停止动火。动火暂停___分钟以上，应该重新检测，内部可燃气体浓度达到许可作业浓度才能继续动火作业
A. 10
B. 30
C. 60
D. 120
【单选题】
受限空间的作业场所空气中的含氧量应为___，若空气中含氧量低于低限值或高于高限值，应有报警信号
A. 18%～22.5%
B. 19%～22.5%
C. 18%～23.5%
D. 19%～23.5%
【单选题】
在受限空间作业前，___应对监护人和作业人员进行安全教育培训，包括作业空间的结构和相关介质，作业中可能遇到的意外和处理、救护方法等。
A. 作业监督人
B. 作业地点负责人
C. 施工单位负责人
D. 作业单位负责人
