【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
【单选题】
A user is trying to retrieve objects from a SharePoint server and finds the request is taking an excessive amount of time. An administrator tries to isolate the issue and notes the following: Application performance is poor when compared to virtual machines on other hosts. Performance improves when the virtual machine is moved to another host. The virtual machine encounters higher than expected CPU %Ready times. What conclusion can be reached regarding the performance issues for this virtual machine? ___
A. Host Power Management is directly impacting virtual machine performance.
B. The virtual machine has a large number of snapshots.
C. The Path Selection Policy for the storage device is set differently on the affected host.
D. Network I/O control is configured for the portgroup.
【单选题】
A virtual machine template is accidently removed from the vCenter Server Inventory. Which method would be used to recover the template back into the environment?___
A. Use the datastore browser to locate the template, then right click and add the .vmtx file to inventory.
B. Use the datastore browser to locate the template, then right click and add the .vmx file to inventory.
C. Using the Managed Object Browser and adding the template from the ManagedObjectReference:GuestFileManager object.
D. Using the Managed Object Browser and adding the template from the ManagedObjectReference:VirtualDiskManager object.
【单选题】
A vSphere administrator needs to backup a virtual machine that has a Microsoft SQL Server Database installed. Which solution allows for an application quiesce to occur during backup?___
A. VMware vCenter Converter
B. VMware vCenter Site Recovery Manager
C. VMware vSphere Replication
D. VMware vSphere Data Protection Advanced
【单选题】
An administrator is migrating a virtual machine from a Test cluster to a Production cluster. The two environments do not have any shared storage. What is the easiest way to accomplish this task? ___
A. Perform a Storage vMotion.
B. Perform a regular vMotion.
C. Perform a Virtual to Virtual migration.
D. Perform a backup and restore using VMware Data Protection.
【单选题】
An administrator must determine an appropriate backup solution, given these conditions: 50 of the virtual machines are in a resource pool named Finance. 50 of the virtual machines are in a resource pool named QA. Which solution allows an administrator the ability to backup 100 virtual machines? ___
A. Use Snapshot Manager on the vCenter Server to backup the virtual machines.
B. Use the VMware Consolidated Backup (vcb) tool on the ESXi Host to backup the virtual machines.
C. Use the VMware Data Recovery (VDR) Appliance on the vCenter Server to backup the virtual machines.
D. Use the VMware Data Protection (VDP) Appliance on one of the
E. SXi Hosts to backup the virtual machines.
【单选题】
What is a benefit of using Enhanced vMotion Compatibility for an environment? ___
A. EVC masks CPU features to allow compatibility between hosts that are dissimilar.
B. EVC allows for cross platform vMotion to occur.
C. EVC enables Long
D. istance vMotion.
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
An administrator needs to verify that vMotion operations can be performed in a vSphere data center.What round trip time (RTT) latency is the maximum value that will allow vMotion operations to succeed? ___
A. 50ms RTT
B. 100ms RTT
C. 150ms RTT
D. 200ms RTT
【单选题】
A storage administrator has reported that full utilization of all bandwidth from an ESXi 6.x host is not being seen. In troubleshooting the issue, the Adapter details are shown in the Exhibit. Based on the exhibit, what is cause of the issue? ___
A. The array is not setup to use the correct multipathing policy.
B. There are no virtual machines on the ESXi host.
C. Not all links are used because a path is disabled.
D. Another path needs to be configured.
【单选题】
An administrator is migrating a powered-on virtual machine, as shown in the exhibit. Which option should be selected to perform a Storage vMotion of the VM? ___
A. Change storage only
B. Change VM compute resource only
C. Change both compute resource and storage, changing the compute resource first.
D. Change both compute resource and storage, changing the storage resource first.
【单选题】
An administrator is attempting to enable Storage I/O Control on a datastore, but it is failing. What is the likely reason for this failure? ___
A. The host is connected to a datastore is running on ESX 4.0.
B. The host is connected to a Fibre Channel storage array.
C. The datastore has multiple extents.
D. The datastore is managed by a single vCenter Server.
推荐试题
【单选题】
依据《中国南方电网有限责任公司电力安全工作规程》，充氮变压器、电抗器未经充分排氮（其气体含氧密度未达到___及以上时），严禁施工作业人员入内。
A. 15%
B. 16%
C. 17%
D. 18%
【单选题】
依据《中国南方电网有限责任公司电力安全工作规程》，从SF6气体钢瓶引出气体时，应使用___。当瓶内压力降至9.8×104Pa（1个大气压）时，即停止引出气体，并关紧气瓶阀门，戴上瓶帽，防止气体泄漏。
A. 普通气阀减压
B. 减压阀降压
C. 增压阀增压
【单选题】
依据《中国南方电网有限责任公司电力安全工作规程》，“以手触试”环节，应在张某（厂站工作许可人）会同王某（工作负责人）到达作业现场核实工作票所列安全措施已经完成后，在办理工作许可手续签名前，由___进行。
A. 李某
B. 王某
C. 张某
【单选题】
依据《中国南方电网有限责任公司电力安全工作规程》，操作中发生疑问，应立即___，并及时汇报，经查明问题并确认后，方可继续操作，不应擅自更改操作票。
A. 恢复原状
B. 停止操作
C. 汇报工作负责人
【单选题】
依据《中国南方电网有限责任公司电力安全工作规程》，在屋顶;坝顶;陡坡;悬崖、吊桥以及其他危险的边沿进行工作，临空一面应装设___或防护栏杆，否则工作人员应使用安全带。
A. 警示牌
B. 安全网
C. 围栏
【单选题】
依据《中国南方电网有限责任公司电力安全工作规程》，变电站内工作，___情况下工作票所列人员才可以进入高压室、阀厅内和室外高压设备区内。
A. 巡视设备
B. 单独一人
C. 有人监护
D. 电话或口头命令
【单选题】
依据《中国南方电网有限责任公司电力安全工作规程》，装有SF6设备的电气设备室和SF6气体实验室，应装设强力通风装置，排风口应设置在室内墙壁___。
A. 上部
B. 中部
C. 底部
【单选题】
依据《中国南方电网有限责任公司电力安全工作规程》，在没有栏杆的脚手架上工作，高度超过___m时，应使用安全带，或采取其他可靠的安全措施。
A. 1
B. 1.5
C. 2
D. 3
【单选题】
依据《云南电网有限责任公司现场电气操作票业务指导书（变电部分）（2017）》，断路器控制电源、保护电源必须待其回路有关隔离开关全部操作完毕后才能退出，以防止___失去控制电源和保护电源。
A. 保护误动时
B. 误操作时
C. 断路器故障时
D. 隔离开关故障时
【单选题】
依据《中国南方电网有限责任公司电力安全工作规程》,在电气设备上工作需要选用工作票，常说的8+2+2系统。指厂站1、2、3种；线路1、2种工作票；新增___票，及书面形式记录和调度检修申请单和一、二级动火工作票。
A. 线路三种工作票、带电作业工作票
B. 电话口头命令、书面形式布置和记录
C. 低压配电网工作票、带电作业工作票、紧急抢修工作票
D. 调度检修申请单、一、二级动火工作票。
【多选题】
依据《中国南方电网有限责任公司电力安全工作规程》，厂站工作间断期间，若有紧急需要，工作许可人可在工作票未收回的情况下协调设备送电，但应事先通知工作负责人，在得到工作班人员已全部撤离工作地点、可以送电的答复，并采取___必要措施后方可执行。
A. 拆除临时遮栏、接地线和标示牌，恢复常设遮栏，换挂“止步，高压危险!”的标示牌
B. 在所有道路派专人守候，确保所有人员不能进入送电现场。守候人员在工作票未交回以前，不得离开守候地点
C. 收回所有相关设备的工作票，拆除临时遮栏、接地线和标示牌，恢复常设遮栏
【多选题】
依据《中国南方电网有限责任公司电力安全工作规程》，单人操作是指一人单独完成的操作。应满足___要求。
A. 实行单人操作的设备、项目和运行人员（调控人员）应经地市级及以上单位考核批准，并报调度部门备案
B. 单人操作的发令人和操作人的通话应录音
C. 操作人受令时应复诵无误
D. 配电设备的监护操作可由该设备运行单位的运行人员或取得该单位相应资格的检修人员监护
【多选题】
依据《中国南方电网有限责任公司电力安全工作规程》，在继电保护、安全自动装置及自动化监控系统屏间的通道上搬运或安放试验设备时，不应阻塞通道，防止误碰运行设备。清扫运行设备和二次回路时，要___，要使用绝缘工具。
A. 防止振动
B. 防止误碰
C. 防止潮湿
D. 防止寄生
【多选题】
依据《中国南方电网有限责任公司电力安全工作规程》，___工作需选用紧急抢修工作票。
A. 紧急缺陷和事故事件抢修工作
B. 灾后抢修工作
C. 设备运维单位进行低压配电网停电的工作
D. 高压配电线路作业不需要停用重合闸的带电作业工作票或线路第二种工作票的工作
【多选题】
依据《中国南方电网有限责任公司电力事故事件调查规程》，事故事件发生后,有关单位和电力调度机构应当立即启动相应的应急预案和现场处置方案，采取有效的应急处置措施，控制事故事件范围，迅速抢救伤员，科学、合理调配应急物资和队伍等应急资源，积极防止事故事件蔓延扩大，特别是防止发生___等。
A. 人员伤亡扩大
B. 线路非计划停运
C. 电力系统崩溃
D. 电网瓦解
【多选题】
依据《中国南方电网有限责任公司电力事故事件调查规程》，事故事件发生后,有关单位和电力调度机构应当立即启动相应的应急预案和现场处置方案，采取有效的应急处置措施，控制事故事件范围，迅速抢救伤员，科学、合理调配应急物资和队伍等应急资源，积极防止事故事件蔓延扩大，特别是防止发生___等。
A. 人员伤亡扩大
B. 线路非计划停运
C. 电力系统崩溃
D. 电网瓦解
【多选题】
依据《中国南方电网有限责任公司电力安全工作规程》，工作班（作业）人员的安全责任是___；相互关心作业安全，不伤害自己，不伤害他人，不被他人伤害和保护他人不受伤害；正确使用工器具和劳动防护用品。
A. 熟悉工作内容、流程，掌握安全措施，明确工作中的危险点，并履行签名确认手续
B. 遵守各项安全规章制度、技术规程和劳动纪律
C. 服从工作负责人的指挥和专责监护人的监督，执行现场安全工作要求和安全注意事项
D. 发现现场安全措施不适应工作时，应及时提出异议
【多选题】
依据《中国南方电网有限责任公司电力安全工作规程》，试验结束时，试验人员应拆除自装的___和（），并对被试设备进行检查，恢复试验前的状态，经试验负责人复查后，进行现场清理。
A. 接线
B. 接地线
C. 短路线
D. 导线
【多选题】
依据《中国南方电网有限责任公司电力安全工作规程》，在继电保护、安全自动装置及自动化监控系统屏间的通道上搬运或安放试验设备时，不应阻塞通道，防止误碰运行设备。清扫运行设备和二次回路时，要___，要使用绝缘工具。
A. 防止振动
B. 防止误碰
C. 防止潮湿
D. 防止寄生
【多选题】
依据《中国南方电网有限责任公司电力安全工作规程》，工作班（作业）人员的安全责任是___；相互关心作业安全，不伤害自己，不伤害他人，不被他人伤害和保护他人不受伤害；正确使用工器具和劳动防护用品。
A. 熟悉工作内容、流程，掌握安全措施，明确工作中的危险点，并履行签名确认手续
B. 遵守各项安全规章制度、技术规程和劳动纪律
C. 服从工作负责人的指挥和专责监护人的监督，执行现场安全工作要求和安全注意事项
D. 发现现场安全措施不适应工作时，应及时提出异议
【判断题】
依据《云南电网有限责任公司现场电气操作票业务指导书（变电部分）（2017）》，用母联断路器对母线充电时，应投入母联断路器母差保护（或母线差动保护），充电正常后退出差动保护。
A. 对
B. 错
【判断题】
依据《云南电网有限责任公司厂站工作票业务指导书》规定,由厂家提供技术性服务、配合施工单位施工的项目，由工作许可人进行安全技术交代，并指定专人在工作现场进行安全监护。
A. 对
B. 错
【判断题】
依据《中国南方电网有限责任公司电力安全工作规程》，在一经合闸即可送电到工作地点的厂站工作时的隔离开关或断路器操作把手、电压互感器低压侧空气开关（熔断器）操作处，应悬挂相应的标示牌。
A. 对
B. 错
【判断题】
依据《中国南方电网有限责任公司电力安全工作规程》，动火工作负责人，宜具备电气工作票工作负责人资格。动火作业作为电气工作票的附加工作时，电气工作票负责人可以同时担任动火工作负责人。
A. 对
B. 错
【判断题】
依据《中国南方电网有限责任公司电力安全工作规程》，小张作为专责监护人对某工作现场履行监护职责。工作过程中，小张见人手不够，参与到工作当中。后接到电话，离开现场，工作班成员继续工作。判断小张的做法是否对。
A. 对
B. 错
【判断题】
依据《中国南方电网有限责任公司电力安全工作规程》，电气工具使用前应检查电线是否完好，有无接地线；不合格的禁止使用；使用时应按有关规定接好剩余电流动作保护器（漏电保护器）和接地线。
A. 对
B. 错
