【单选题】
What is the minimum disk space required to deploy vSphere Data Protection (VDP) with 8 TB configuration?___
A. 4 TB
B. 16 TB
C. 8 TB
D. 12 TB
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
What advanced option for vSphere HA defines a maximum number of reset attempts by VMCP for a virtual machine?___
A. das.maxterminates
B. das.isolationshutdowntimeout
C. das.maxresets
D. fdm.isolationpolicydelaysec
【单选题】
What vSphere technology enables the administrator to ensure consistent configuration at scale?___
A. PowerCLI
B. Host Profiles
C. esxcli
D. vSphere Web Client
【单选题】
Which port is used for vSphere HA agent-to-agent communication?___
A. 443
B. 8182
C. 22
D. 902
【单选题】
Which log file would assist in identifying an issue that occurred during the database export phase of a vCenter Server upgrade process?___
A. vcdb_import.out
B. export.json
C. export-upgrade-runner.log
D. vcdb_export.out
【单选题】
Bidirectional CHAP is support by which storage initiator?___
A. software FCoE HBA
B. Fibre Channel HBA
C. independent hardware iSCSI HBA
D. dependent hardware iSCSI HBA
【单选题】
What is a pool of raw storage capacity that a storage system can provide to Virtual Volumes?___
A. protocol endpoint
B. storage container
C. storage provider
D. datastore
【单选题】
vSphere 6.5 DRS is now Network-Aware. Based on network utilization, when will DRS balance VMs?___
A. DRS will balance VMs when a network resource pool is configured for VMs.
B. DRS will balance VMs when Network I/O Control is enabled.
C. DRS will place VMs on initial boot for hosts that have network utilization lower that the threshold.
D. DRS will vMotion VMs when network utilization is higher than the threshold on a particular host.
【单选题】
A scripted upgrade of ESXi fails due to an incorrect parameter in the upgrade script. What file must the administrator modify to correct the problem?___
A. vmreconfig.pl
B. hostinfo.pl
C. ks.cfg
D. boot.cfg
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machine VM2. If a user is a member of group A and B, what action can the user perform?___
A. Suspend VM2.
B. Power off VM1.
C. Power on and power off VM1.
D. Power on and power off VM2.
【单选题】
The networking team has requested to have a dedicated network for iSCSI traffic. This task has been assigned to the vSphere Administrator. What is the VMware-recommended way to accomplish this?___
A. Configure Static Routes on each ESXi Server.
B. Configure the right subnet.
C. Create a custom IP Stack.
D. Define a dedicated gateway for the iSCSI vmkernel.
【单选题】
To prevent possible failures or issues during a vSphere upgrade, which component should be upgraded first?___
A. ESXi Hosts
B. virtual machines
C. datastores
D. vCenter Server
【单选题】
What is the command for updating an ESXi host?___
A. esxcli software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
B. esxupdate software update –d”/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
C. esxcli software update –d “/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
D. esxupdate software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
【单选题】
A vSphere Administrator would like to identify which physical NUMA node their virtual machine is currently residing on. What esxtop metric would provide this information?___
A. GST_ND[x]
B. OVD_ND[x]
C. NRMEM
D. NHN
【单选题】
How can a vSphere administrator ensure that two virtual machines never run on the same datastore in a datastore cluster, while permitting the VMs to be load-balanced?___
A. Use an Intra-VM Anti-Affinity Rule.
B. Configure a storage DRS VM override.
C. Disable storage
D. RS for the VMs.
【单选题】
What is the VMware-recommended way to move a physical adapter out of Network I/O Control’s scope?___
A. Set the teaming policy to “Route Based on Physical NIC Load.”
B. Add the vmnic to the Net.NetNiocAllowOverCommit parameter in Advanced System Settings.
C. Add the vmnic to the Net.IOControlPnicOptOut parameter in Advanced System Settings.
D. Move the vmnic to a different vmUplink port on the Distributed Switch.
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machines, defined on the VM folder and its children. If a user is a member of Groups A and B, what will be the user’s effective permission on VM1 and VM2?___
A. Power on
B. Power off.
C. Power on and Power off.
D. Reset.
【单选题】
Group 1 is granted console interaction on a VM folder. User 1 is granted no console interaction on the same VM folder. What will be the outcome if User 1 tries to access the console of a virtual machine?___
A. User 1 will not be able to access the virtual machines in the VM folder.
B. User 1 will not have access to the virtual machine console.
C. User 1 will have access to the virtual machine console.
D. User 1 will have console access only via the vSphere Web Client.
【单选题】
Which statement is true regarding the use of VMFS3 datastores with vSphere 6.5?___
A. VMFS3 datastores can be used but not created.
B. VMFS3 datastores can be neither used nor created.
C. VMFS3 datastores will be present but unmounted.
D. VMFS3 datastores can be created and used.
【单选题】
In the Exhibit, each VM has a 1GHz non-expandable reservation. If all VMs are powered on in sequence, what would be the outcome?___
A. VM4 cannot be powered on.
B. VM5 cannot be powered on.
C. VM6 cannot be powered on.
D. VM3 cannot be powered on.
【单选题】
vSphere 6.5 introduced MAClearning capabilities for VMware’s virtual switches. What three benefits will it provide? (Choose three.)___
A. Reduced memory consumption.
B. Reduced consumption of extra CPU cycles.
C. Increased network throughput.
D. Prevent packet flooding inside the vSwitch.
【单选题】
What is the default pathing policy for most active-active arrays?___
A. Fixed
B. Most Recently Used
C. Dynamic
D. isk Morroring
【单选题】
Which command will show the iSCSI sessions on a ESXi 6.5 host?___
A. esxcli storage iscsi session get
B. esxcli iscsi session get
C. esxcli storage iscsi session
D. esxcli iscsi session list
【单选题】
Which of the following is not a parameter for traffic filtering or marking?___
A. virtual port ID
B. Protocol
C. Traffic Direction
D. DSCP value
E. Traffic redirection
【单选题】
A vSphere administrator wants to enable a virtual machine with Secure Boot, but in VM setting, Secure Boot option was not found under Boot Options. What could be the cause?___
A. The virtual hardware is not compatible.
B. The virtual machine has missing drivers.
C. The virtual machine OS does not support secure boot.
D. VMware Tools is not upgraded.
【单选题】
A virtual machine is connected on a distributed port group where the average bandwidth configured in the traffic shaping policy is 100 Mbps. The VM network adapter is configured with a reservation of 200 Mbps. What is the VM’s effective bandwidth?___
A. 200 Mbps
B. 100 Mbps
C. 150 Mbps
D. 400 Mbps
【多选题】
What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode?(Choose two.)___
A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
B. Storage DRS is configured for a VMFS3 datastore.
C. Storage
D. RS is disabled on the virtual disk.
【多选题】
What two methods are used to configure VMware vSphere Storage I/O Control shares and limits? (Choose two.)___
A. Assign shares and limits to VM virtual disks.
B. Assign shares and limits to datastores.
C. Assign shares and limits to Storage (DRS) clusters.
D. Assign shares and limits using VM storage policies.
【多选题】
ESXi 6.5 introduces VMFS6, which supports both 512e and 512n devices. What three configurations are supported when using these devices? (Choose three.) ___
A. Hosts with both 512e and 512n devices.
B. Storage vMotion between both 512e and 512n devices.
C. Datastore Extents spanned between both 512e and 512n devices.
D. Storage DRS clusters containing only both 512e and 512n devices.
【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
【多选题】
Which two features require the use of Host Profiles? (Choose two.)___
A. Host Customizations
B. shared storage
C. Auto
D. eploy
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
【多选题】
What two debugging levels can a virtual machine be configured to? (Choose two.)___
A. Verbose
B. Debugging
C. Statistics
D. Trivia
【多选题】
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.) ___
A. Better performance because there is less contention for a single volume.
B. More flexibility for resizing virtual disks.
C. Less wasted storage space.
D. More flexibility to create virtual machines without adding new LUNs.
E. Fewer VMFS datastores to manage.
【多选题】
Which two configurable options are available in Boot Options for a virtual machine? (Choose two.)___
A. Tools Upgrades
B. Encryption
C. Firmware
D. Force BIOS setup
【多选题】
Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)___
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
【多选题】
What are two requirements to enable EVC in vSphere DRS cluster? (Choose two.)___
A. CPUs must be from the same vendor.
B. EVC must use the lowest possible baseline supported by the hardware.
C. CPUs must be in the same family and of the same speed.
D. No VMs may be running in the cluster.
推荐试题
【单选题】
1. AA001 主视图、左视图中相应投形的高度( ).
A. j
B. jj
C. jjj
D. jjjj
【单选题】
三相电动势到达最大的顺序是不同的,这种达到最大值的先后次序,称三相电源的相序,相序为U-V-W-U,称为___。
A. 正序
B. 负序
C. 逆序
D. 相序
【单选题】
电路的作用是实现能量的传输和转换、信号的___和处理。
A. 连接
B. 传输
C. 控制
D. 传递
【单选题】
电阻器反映导体对电流起阻碍作用的大小,简称___。
A. 电动势
B. 功率
C. 电阻率
D. 电阻
【单选题】
___反映了在不含电源的一段电路中,电流与这段电路两端的电压及电阻的关系。
A. 欧姆定律
B. 楞次定律
C. 部分电路欧姆定律
D. 全欧姆定律
【单选题】
并联电路中的总电流等于各电阻中的___。
A. 倒数之和
B. 相等
C. 电流之和
D. 分配的电流与各电阻值成正比
【单选题】
串联电路中流过每个电阻的电流都___。
A. 电流之和
B. 相等
C. 等于各电阻流过的电流之和
D. 分配的电流与各电阻值成正比
【单选题】
___的一端连在电路中的一点,另一端也同时连在另一点,使每个电阻两端都承受相同的电压,这种联结方式叫电阻的并联。
A. 两个相同电阻
B. 一大一小电阻
C. 几个相同大小的电阻
D. 几个电阻
【单选题】
___的电阻首尾依次相连,中间无分支的联结方式叫电阻的串联。
A. 两个或两个以上
B. 两个
C. 两个以上
D. 一个或一个以上
【单选题】
电流流过负载时,负载将电能转换成___。
A. 机械能
B. 热能
C. 光能
D. 其他形式的能
【单选题】
电功的数学表达式不正确的是___。
A. W=Ut/R2t
B. W=UIt
C. W=U2t/Rt
D. W=I2Rt
【单选题】
测量电压时,电压表应与被测电路___。
A. 并联
B. 串联
C. 正接
D. 反接
【单选题】
测量电流时,万用表的接线方法与直流电流表一样,应把万用表___在电路中。测量直流电压时,应把万用表与被测电路并联。
A. 串联
B. 并联
C. 正接
D. 反接
【单选题】
串联电路中各电阻两端电压的关系是___。
A. 各电阻两端电压相等
B. 阻值越小两端电压越高
C. 阻值越大两端电压越高
【单选题】
确定正弦量的三要素为 ___。
A. 相位、初相位、相位差
B. 最大值、频率、初相角
C. 周期、频率、角频率
【单选题】
纯电容元件在电路中___电能。
A. 储存
B. 分配
C. 消耗
【单选题】
当电压为5V时,导体的电阻值为5欧,那么当电阻两端电压为2V时,电阻值为___欧。
A. 10
B. 5
C. 2
【单选题】
电容器可用万用表___档进行检查。
A. 电压
B. 电流
C. 电阻
【单选题】
对称负载接成星形时,三相总电流___。
A. 等于零
B. 等于其中一相电流的三倍
C. 等于其中一相电流。
【单选题】
一段有源支路如图1所示,AB两端的电压UAB为___。
A. 10 V
B. —2V
C. 2V
D. —10V
【单选题】
如图2电路中,等效电阻=___
A. 150Ω
B. 900Ω
C. 600Ω
D. 100Ω
【单选题】
电流表的读数是4A,则电路中电流表的读数是 ___
A. 4A
B. 1A
C. 3A
D. 0A
【单选题】
在R、L、C串联电路中,已知=3Ω,=5Ω,=8Ω,则电路的性质为 ___。
A. 感性
B. 容性
C. 阻性
D. 不能确定
【单选题】
工业生产中大量的设备均为感性负载,功率因数往往很低,常采取___的方法来提高电网的功率因数。
A. 并联电容
B. 串联电容
C. 串联电感
D. 并联电感
【单选题】
交流电压表及电流表指示的数值是___
A. 平均值
B. 有效值
C. 最大值
D. 瞬时值
【单选题】
RLC串联电路发生谐振,,R=10Ω,Ω,则谐振时的感抗为___
A. 10Ω
B. 40Ω
C. 20Ω
D. 30Ω
【单选题】
RL从电路获得最大功率,此时RL=___。
A. 2Ω
B. 5Ω
C. 4Ω
D. 9Ω
【单选题】
使用电解电容时___。
A. 负极接高电位,正极接低电位
B. 正极接高电位,负极接低电位
C. 正极接高电位,负极也可以接高电位
D. 不分正负极
【单选题】
开关接1时,电压表的读数为___。
A. 0V
B. 0.2V
C. 1.96V
D. 2V
【单选题】
开关接2时,电流表的电流为___。
A. 0A
B. 10A
C. 0.2A
D. 约等于0.2A
【单选题】
开关接1时,电流表中流过的短路电流为___。
A. 0A
B. 0.2A 图5
C. 10A
D. 约等于0.2A
【单选题】
正弦交流电常用的表达方法有___。
A. 解析式表示法
B. 波形图表示法
C. 相量表示法
D. 以上都是
【单选题】
电感两端的电压相位超前电流___。
A. 90°
B. 180°
C. 360°
D. 30°
【单选题】
电容两端的电压相位滞后电流___。
A. 30°
B. 90°
C. 180°
D. 360°
【单选题】
应用戴维南定理求含源二端网络的输入等效电阻是将网络内各电动势___
A. 串联
B. 并联
C. 短接
D. 开路
【单选题】
LC 选频振荡电路,当电路频率等于谐振频率时,电路性质为___。
A. 电阻性
B. 感性
C. 容性
D. 纯电容性
【单选题】
阻值为4Ω的电阻和容抗为3Ω的电容串联,总复数阻抗为___
A. 3+j4
B. 3-j4
C. 4+j3
D. 4-j3
【单选题】
电动势为10V,内阻为2Ω的电压源变换成电流源时,电流源的电流和内阻是___
A. 10A,2Ω
B. 20A,2Ω
C. 5A,2Ω
D. 2A,5Ω
【单选题】
电流为5A,内阻为2Ω的电流源变换成一个电压源时,电压源的电动势和内阻为___
A. 10V,2Ω
B. 2.5V,2Ω
C. 0.4V,2Ω
D. 4V,2Ω
【单选题】
额定电压都为220V的40W、60W、100W三灯泡串联在220V的电源中,它们的发热量由大到小排列为___
A. 100W 60W 40W
B. 40W 60W 100W
C. 100W 40W 60W
D. 60W 100W 40W