【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks？___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
What action must you take on the ise to blacklist a wired device？___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection？___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing？___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication？___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning？___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5， but does not use encryption？___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist， using security intelligence to block illicit network activity. However， the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites？___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat（ins，any）dynamic interface】Which ty pe of NaT is configured on a Cisco ASA？___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network？___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration？___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS？___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security？___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true？ ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication，authorization，and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10？___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center？___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true？___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed？___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
推荐试题
【多选题】
识别仪和车道软件通讯失败的判断及解决方法有___。
A. 检查识别仪 RJ45 接口、网线、网络交换机或计算机的网络
B. 检查识别仪的供电线路，检查12V电源适配器
C. 重新启动车道程序
D. 重新启动识别仪
【多选题】
ETC 路侧单元（RSU）设备电源开关打开后，POWER 区域内 AC 220V 和 VCC 指示灯不亮的判断方法有___。
A. 检查控制器背面的电源线是否连接正常
B. 检查 220V 电源插座是否有电
C. 如果 220V 电源插座和电源线均正常，则可以判定控制器内电源故障，需申请报修
D. 检查电源适配器后面板的 RSU PORT I 连接器是否正常连接
【多选题】
ETC 路侧单元（RSU）设备上电故障时，表现为______。___
A. 适配器 RSU Status 区域内2号灯常亮不灭，同时电源适配器鸣响3声
B. SAM Status 区域内相应的绿灯没有亮起
C. 车道计算机软件界面有初始化失败的提示
D. 通信区域内进入OBU时，界面提示OBU无卡
【多选题】
监视器墙、硬盘录像机上无该路图像，通过矩阵也切不到该路图像，车道计算机上也显示不出该路图像；其它路图像显示正常，可能的原因有___。
A. 摄像机没加电
B. 从摄像机至 VDM 的信号线故障
C. 摄像机故障
D. VDM 没加电或损坏
【多选题】
以下哪些原因可能造成车辆检测器检测不出车辆，线圈检测的指示灯不亮。___
A. 车辆检测器相邻车道相互干扰
B. 车辆检测器电源模块损坏
C. 车辆检测器的工作电压不正常
D. 车辆检测器线圈损坏，不能正常检测车辆
【多选题】
关于数据备份和系统恢复，下列哪些说法是正确的___。
A. 系统具有数据自动备份功能
B. 长期稳定运行的设备系统无需进行备份
C. 系统具有数据手动备份功能
D. 数据备份的介质可以有多种选择
【多选题】
针对车道软件配置参数丢失的问题，判断及解决方法有___。
A. 检查车道计算机IP地址是否正确
B. 检查车道软件参数配置项是否正确
C. 检查车道计算机网线是否插好
D. 禁用再重新启用车道计算机网卡
【多选题】
关于车道收费软件版本下列那种说法是正确的___。
A. 若收费车道为复式车道，车道收费软件版本升级后为复式车道软件版本
B. 若普通收费车道收费软件版本升级前为复式收费车道软件版本，升级后为复式车道软件版本
C. 若普通车道收费软件克隆自复式车道，车道软件版本升级后为复式收费车道版本
D. 普通收费车道版本收费软件若应用于复式收费车道不会产生任何问题
【多选题】
下列哪些原因可能造成IC卡读写器无法读写 ETC 中原通卡。___
A. 未安装部级 PSAM 卡
B. 未安装省级 PSAM 卡
C. 部级 PSAM卡损坏
D. 省级PSAM卡损坏
【多选题】
关于监控分中心系统监控设备配置中，正确的是______？___
A. 视频存储应配置保存不少于30d的视频存储容量
B. 磁盘阵列配置保存3年以上数据容量
C. 监控综合控制台不少于10个
D. UPS后备时间小于60分钟
【多选题】
在信息安全策略体系中，下面哪些不属于计算机或信息安全的强制性规则（ ）。___
A. 标准（Standard）
B. 安全策略（Security policy）
C. 方针（Guideline）
D. 流程（Procedure）
【多选题】
关于交换机的作用和特点，以下说法正确的是（ ）。___
A. 交换机工作于OSI参考模型的二层；
B. 提供以太网交换和桥接；
C. 交换机基于MAC地址表转发数据，MAC地址表是自行学习的；
D. 交换机工作于OSI参考模型的四层；
【多选题】
以下关于VLAN的描述哪些是正确的（ ）。___
A. IEEE802、1q协议标准定义了VLAN技术
B. VLAN技术利用软件实现了二层广播域的划分，完美地解决了路由器划分广播域存在的困难
C. VLAN将一组位于不同物理网段上的用户在逻辑上划分在一个局域网内，在功能和操作上与传统LAN基本相同，可以提供一定范围内终端系统的互联
D. 一个VLAN属于同一个广播域，不同的VLAN属于相同的广播域
【多选题】
VLAN与传统的LAN相比，具有以下哪些优势（ ）。___
A. 减少移动和改变的代价
B. 建立虚拟工作组
C. 限制广播包，提高带宽的利用率
D. 用户受物理设备的限制，VLAN用户不能处于网络中的任何地方
【多选题】
下面关于OSI参考模型的说法不正确的是（ ）。___
A. 传输层的数据称为帧（Frame）
B. 网络层的数据称为段（Segment）
C. 数据链路层的数据称为数据包（Packet）
D. 物理层的数据称为比特（Bit）
