【单选题】
We appreciate your efforts in making changes in your schedule and think that this new arrangement is now ___ to us.
A. agreeable
B. sustainable
C. portable
D. indispensable
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
The woman who died in a car crash last Saturday in the suburbs has been ___ as Kate Johnson, a 25-year-old office clerk.
A. justified
B. identified
C. notified
D. classified
【单选题】
My nephew failed in the College Entrance Examination, and we were all very sorry that he did not ___ to the university.
A. take it
B. get it
C. make it
D. succeed it
【单选题】
Almost half of that group will experience stress ___ enough to call for professional help.
A. tense
B. moderate
C. bearable
D. intense
【单选题】
If you grow too fast your entire economy could completely shut down and bring growth to a(n) ___.
A. halt
B. cease
C. peak
D. epidemic
【单选题】
I tried my best to drive inside in order to avoid the edges that might make me ___ the steep slope.
A. slip down
B. settle down
C. bring down
D. turn down
【单选题】
When the driver heard that there was a bomb on the bus, he immediately ___ to the side of the highway and radioed the police.
A. put out
B. took off
C. pulled over
D. slipped off
【单选题】
She was very ___ to become a manager in our customers’ office, but finally accepted our offer.
A. eager
B. intelligent
C. ridiculous
D. reluctant
【单选题】
In the race, it looked as if he would be the first, but then another young man who was close behind him put on speed and ___ by a few seconds.
A. beat him for it
B. beat him to it
C. beat him up
D. beat it to him
【单选题】
It is really helpful to have someone like you that we can ___ and count on during difficult times.
A. lean on
B. get to
C. hang on
D. get by
【单选题】
Women have a greater ability to ___ names with faces than men do, and they are also better at recalling lists.
A. associate
B. compare
C. engage
D. involve
【单选题】
He was always ready to help others and managed to ___ his friends ____being hurt.
A. expose … to
B. confine …to
C. restrict … from
D. shield … from
【单选题】
Older people are less likely to be ___ their negative emotions (情绪) and more likely to focus on the positive.
A. reserved for
B. caught up in
C. beat up to
D. counted on
【单选题】
I don’t have any bandage, so I have to ___ pressure to the wound to keep the bleeding down.
A. apply
B. involve
C. fulfill
D. establish
【单选题】
It is important that whichever candidate (候选人) is picked the loser should accept the defeat ___.
A. in advance
B. with great pride
C. with good grace
D. in large part
【单选题】
___ that new homes cost more than older homes, but that is not true across the country anymore.
A. It used to be
B. It is used to be
C. It used to being
D. It is used to being
【单选题】
The boss ___ his employees to work longer hours as the company is dreadfully short of staff at present.
A. called on
B. signed up
C. cared for
D. set up
【单选题】
The president’s visit and ___ discussions led to a plan that aimed to improve the trade relations between the two countries.
A. emerging
B. subsequent
C. consequent
D. Submerging
【单选题】
The author ___ his general idea mainly through statistics and results obtained from a survey (调查) about auto customer services in the United States.
A. assumes
B. engages
C. illustrates
D. represents
【单选题】
People in this town starved, several buildings were bombed and crime ___ because you had to steal to eat.
A. eroded
B. reflected
C. released
D. soared
【单选题】
Olympic recognition for bodybuilding (健美) remains ___ since some argue that bodybuilding is not a sport because the actual contest does not involve the same sort of efforts as “real” sports.
A. controversial
B. conventional
C. characteristic
D. influential
【单选题】
Tom tried to justify his absence from the meeting by ___ that he had been ill that day.
A. admitting
B. advocating
C. claiming
D. citing
【单选题】
___ the huge financial benefits, biological companies have been rushing to set up laboratories and new research projects.
A. Aware
B. Aware of
C. Not aware
D. Not aware of
【单选题】
Unfortunately, ___ lack of funds, the studies he began just two months ago, had to be ended early.
A. out of
B. in addition to
C. owing to
D. to begin with
【单选题】
With a good command of English, he soon got ___ to working with British people.
A. accustomed
B. consistent
C. relevant
D. responsible
【单选题】
What needs to be ___ here is that language and culture interact, and that understanding of one requires understanding of the other.
A. altered
B. stressed
C. aroused
D. committed
【单选题】
Policies and organizations must be created to meet workers’ hopes, and to ___ new problems that inevitably arise between workers and managers.
A. compromise
B. ensure
C. undermine
D. resolve
【单选题】
To keep the wheels of industry turning, we produce consumer goods in endless quantities, and, in the process, are rapidly ___ our natural resources.
A. ignoring
B. collapsing
C. enduring
D. exhausting
【单选题】
As a person who loves peace, he is committed ___ realizing peace between countries.
A. of
B. about
C. for
D. to
【单选题】
Learning how to use chopsticks is easy for me, ___ learning how to conduct myself at the table is quite difficult.
A. whereas
B. however
C. therefore
D. besides
【单选题】
___ that the patient smokes 50 cigarettes a day, it would be reasonable to assume there is some lung damage.
A. To give
B. Giving
C. Given
D. Having given
【单选题】
Kenyan (肯尼亚的) women tend to vote for those who could provide them ___ the necessary food to live on.
A. of
B. with
C. for
D. about
【单选题】
___ all obstacles and failures, the scientist continued doing his experiments day and night.
A. In spite of
B. In contrast to
C. As a matter of
D. As a result of
【单选题】
I’m willing to ___ that a larger car would have cost more, but I still think we should have bought one.
A. withdraw
B. indicate
C. abandon
D. concede
【单选题】
Manufacturing (制造) companies spend millions of pounds on advertisements, trying to ___ customers that their products are better than those of other companies.
A. confine
B. convince
C. depress
D. reconcile
【单选题】
He is not the right person for the project: he is not very technically minded and ___, he does not have the sense of responsibility.
A. instead
B. yet
C. furthermore
D. nevertheless
【单选题】
Death rates declined in many places, partly because of the ___ in hunger.
A. decrease
B. myth
C. obstacle
D. burden
【单选题】
In deciding whether or not a situation is safe, pilots must be taught to assume that the worst will happen, and then to ___ whether there is a risk or not.
A. absorb
B. apply
C. assess
D. occupy
【单选题】
The worker was not worried as he knew that if he gave up the job, there would be ___ opportunities for him to work somewhere else.
A. formative
B. marginal
C. vigorous
D. numerous
【单选题】
The research shows the region might ___ overheating (经济过热), but the policymakers so far appear to be relatively relaxed about the future of the economy.
A. catch a glimpse of
B. be at risk of
C. take a toll on
D. be free from
【单选题】
Measures have been taken to ensure that no student will have to ___ of college for economic reasons.
A. lay out
B. cancel out
C. drop out
D. stand out
推荐试题
【单选题】
()垂直于基面,与切削速度方向一致。___
A. 摩擦力
B. 背向力
C. 进给力
D. 主切削力
【单选题】
车刀的几何角度中,前角、后角、主偏角和( )是主切削刃上四个最基本的角度。___
A. 副偏角
B. 刃倾角
C. 刀尖角
D. 导程角
【单选题】
铣削速度取15m/min,刀具直径为80mm,则主轴转速应该为( )。___
A. ≈60r/min
B. ≈100r/min
C. ≈160r/min
D. ≈200r/min
【单选题】
铸件在加工后出现变形的原因是( )___
A. 热影响变形
B. 受力变形
C. 内应力消除变形
D. 系统变形
【单选题】
钢经加热淬火后获得的是( )组织。___
A. 马氏体
B. 奥氏体
C. 渗碳体
D. 珠光体
【单选题】
刃倾角可以用来控制切屑的( )。___
A. 温度
B. 流向
C. 厚度
D. 宽度
【单选题】
背吃刀量一般指工件上( )间的垂直距离。___
A. 待加工表面和过渡表面
B. 过渡表面和已加工表面
C. 已加工表面和待加工表面
D. 过渡表面中点和已加工表面
【单选题】
数控机床的主机(机械部件)包括:床身、主轴箱、刀架、尾座和( )。___
A. 进给机构
B. 液压系统
C. 冷却系统
D. 排屑系统
【单选题】
不可提高零件表面质量的方法是()___
A. 合理选择刀具材料
B. 合理选择刀具主偏角
C. 增大刀具的楔角
D. 合理选择切削液
【单选题】
在车削中,以两顶尖装夹工件,可以限制工件的( )自由度。___
A. 二个
B. 三个
C. 四个
D. 五个
【单选题】
碳素工具钢的含碳量是在( )之间。___
A. 0.65%~1.3%
B. 0.065%~0.13%
C. 6.5%~13%
D. 0.65‰~1.3‰
【单选题】
将若干个( )组合起来,就成为一个传动系统,称为传动链。___
A. 传动副
B. 机构
C. 齿轮传动
D. 带传动
【单选题】
把合理的工艺过程中的各项内容编写成文件用来指导生产,这种文件称为( )。___
A. 生产过程
B. 工艺规程
C. 工序
D. 工步
【单选题】
零件尺寸不要形成封闭的尺寸链。以下( )是选择开囗环的依据。___
A. 精度要求不高的
B. 简洁
C. 美观
D. 对称
【单选题】
旋转表面可以采用( )加工方案。___
A. 车削
B. 铣削
C. 刨削
D. 拉削
【单选题】
( )不能通过改变工艺装备的方式加以改善。___
A. 加工精度
B. 加工误差
C. 制造成本
D. 经济精度
【单选题】
夹具中确定夹紧力方向时,最好状况是力( )。___
A. 尽可能的大
B. 尽可能的小
C. 大小应适应
D. 无所谓
【单选题】
切削层公称( )是指在给定瞬间,作用于主切削刃截型上2个极限点间的距离,单位为mm。___
A. 横截面积
B. 宽度
C. 厚度
D. 深度
【单选题】
切削加工中,( )指工件上已加工表面和待加工表面间的垂直距离。___
A. 背吃刀量
B. 切削速度
C. 进给速度
D. 切削层宽度
【单选题】
辅助支承是每加工( )工件要调整一次。___
A. 一个
B. 十个
C. 一批
D. 十批
【单选题】
金属材料在载荷作用下抵抗变形和破坏的能力叫( )。___
A. 强度
B. 硬度
C. 刚度
D. 塑性
【单选题】
可以提高表面质量的方法是()。___
A. 减小副偏角
B. 减小前角
C. 增加刀尖圆弧半径
D. 减小主偏角
【单选题】
常用的夹紧机构中,对工件尺寸公差要求高的是( )机构。___
A. 斜楔
B. 螺旋
C. 偏心
D. 铰链
【单选题】
轴承座零件高度方向的主要基准通常选用( )。___
A. 底面
B. 轴承孔轴线
C. 上平面
D. 中间凸台面
【单选题】
以下刀具材料中,耐热性最高的是( )。___
A. 合金工具钢
B. 人造金刚石
C. 碳素工具钢
D. 陶瓷
【单选题】
退火用于( )钢铁在铸造、锻压和焊接过程中形成的残余应力以及开裂等各种组织缺陷。___
A. 改变
B. 改善或消除
C. 改善
D. 消除
【单选题】
尺寸链组成环中,由于该环减小使封闭环增大的环称为( )。___
A. 增环
B. 闭环
C. 减环
D. 间接环
【单选题】
成批生产中,夹具的使用特征是( )。___
A. 采用通用夹具
B. 广泛采用专用夹具
C. 广泛采用高生产率夹具
D. 极少采用专用夹具
【单选题】
车削直径d=60mm的工件外圆,车床主轴转速n=600r/min,切削速度为( )m/min。___
A. 103
B. 95
C. 108
D. 113
【单选题】
车削时()带走的热量最多。___
A. 切屑
B. 工件
C. 刀具
D. 介质
【单选题】
数控机床的主机(机械部件)包括:床身、主轴箱、刀架、尾座和( )。___
A. 进给机构
B. 液压系统
C. 冷却系统
D. 排屑系统
【单选题】
( )的特点是工件的数量较多,成批地进行加工,并会周期性的重复生产。___
A. 单件生产
B. 成批生产
C. 单件小批生产
D. 大批大量生产
【单选题】
基准是( )。___
A. 用来确定生产对象上几何要素关系的点、线、面
B. 在工件上特意设计的测量点
C. 工件上与机床接触的点
D. 工件的运动中心
【单选题】
在车削中,以两顶尖装夹工件,可以限制工件的( )自由度。___
A. 二个
B. 三个
C. 四个
D. 五个
【单选题】
切削过程中,刀具的切削性能取决于刀具的( )和刀具切削部分材料的性能。___
A. 几何角度
B. 刚度
C. 切削速度
D. 正确安装
【单选题】
公差为0.01mm的Φ10mm的轴与公差为0.01mm的Φ100mm的轴相比,加工精度( )。___
A. 前者高
B. 后者高
C. 一样
D. 无法判断
【单选题】
工艺系统的组成部分不包括( )。___
A. 机床
B. 夹具
C. 量具
D. 刀具
【单选题】
金刚石刀具非常适合切削()材料。___
A. 45钢
B. 低碳钢
C. 铸铁
D. 非金属材料
【单选题】
外螺纹可以采用( )加工方法。___
A. 车削
B. 铣削
C. 刨削
D. 拉削
【单选题】
根据工件加工要求,并不需要限制工件的全部自由度的定位方式为()。___
A. 完全定位
B. 不完全定位
C. 欠定位
D. 过定位