【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
推荐试题
【单选题】
APU火警按钮按出时,哪些系统被隔离:___
A. A燃油,电源
B. B空气,气源
C. C燃油,气源,电源
D. D燃油,液压,电源
【单选题】
当发动机火警按钮按出时,哪些系统和部件受影响:___
A. A低压燃油关断valve,液压,引气,空调组件,发电机
B. B液压防火关断valve打开
C. C吸力供油valve
D. D燃油交输valve
【单选题】
发动机火警探测器位于何处?___
A. A吊架,风扇及核心机部分
B. B核心机和齿轮箱
C. C风扇和涡轮
D. D进气道和燃烧室
【单选题】
发动机和APU防火系统包括:___
A. A每台发动机两个灭火瓶,APU一个灭火瓶
B. B每台发动机一个灭火瓶,APU一个灭火瓶
C. C每台发动机两个灭火瓶,APU两个灭火瓶
D. D两台发动机共用两个灭火瓶,APU一个灭火瓶
【单选题】
217.什么时候发动机灭火剂电门可以起作用?___
A. A当相应的“DISCH”灯亮时
B. B当发动机火警按钮灯亮时
C. C当发动机火警按钮释放后
D.
【单选题】
当发动机火警电门按出后,哪些valve关闭?___
A. A燃油交输valve
B. B低压燃油和液压火警关断valve
C. C高压燃油关断valve
D.
【单选题】
当发动机火警按钮按出后,引气和组件valve会关闭吗?___
A. A会
B. B不会
C.
D.
【单选题】
当发动机火警电门释放后,对电源系统产生什么影响?___
A. AIDG不工作
B. BIDG脱开
C. CIDG开始工作
D. DIDG不受影响
【单选题】
当APU火警电门按出后,哪个valve会受影响?___
A. A低压燃油关断valve
B. B液压火警关断valve
C. C燃油交输隔离valve
D. D空调组件valve
【单选题】
WhentheENGFIREPUSHbuttonisreleasedout,whathappenstotheelectricalgeneraion?___
A. A.IDGde-energized
B. B.IDGdisconnect
C. C.IDGenergized
D.
【单选题】
Howcanathermaldischargeofthebottlebedetectedonacoldaircarft?___
A. A.BytheFDU
B. B.BytheECAM
C. C.Bythereddiscindicator
D.
【单选题】
HowisanAPUfireongroundnormallyextinguished?___
A. A.FromAPUFIREpanel
B. B.Automatically
C. C.FromEXTERNALPOWERpanel
D.
【单选题】
HowarethecargosmokedetectorsconnectedtotheSDCU?___
A. A.Inparallel
B. B.Inseries
C. C.Inaloop
D.
【单选题】
Lavatoryfireextinguishingisperformedby:___
A. A.Portableextinguisher
B. B.Firebottle
C. C.Wastebinfireextinguisher
D.
【单选题】
AGENT按压开关在什么时候才有效?___
A. 当相对应的DISCH灯亮;
B. 发动机防火按压开关灯亮;
C. 发动机防火按压开关松出。
D.
【单选题】
APU防火探测系统有几个火警探测器?___
A. 3;
B. 2;
C. 1。
D.
【单选题】
APU灭火按钮松出时,下列哪个valve受影响?___
A. 低压燃油关断valve;
B. 液压防火关断valve;
C. 燃油隔离valve。
D.
【单选题】
APU灭火瓶安装在哪里?___
A. APU舱;
B. 货舱;
C. APU舱前部,防火墙前面。
D.
【单选题】
APU灭火瓶有几个?___
A. 1个;
B. 2个;
C. 3个。
D.
【单选题】
按下货舱烟雾面板上的TEST按钮后,将模拟什么情况?___
A. 只模拟有烟雾出现;
B. 只模拟一个灭火瓶压力过低;
C. 模拟有烟雾出现和一个灭火瓶压力过低。
D.
【单选题】
当APU地面出现火警时。___
A. APU自动停车,需人工灭火;
B. APU自动停车,自动灭火;
C. APU发了火警警告,需人工停车,人工灭火。
D.
【单选题】
当出现货舱烟雾时___
A. PACKvalve关闭;
B. 发动机引气valve关闭;
C. 货舱隔离valve关闭。
D.
【单选题】
当火井探测器发生故障时,FDU向哪里发出信号___
A. ECAM;
B. FDS;
C. A+B。
D.
【单选题】
当探测到电子舱烟雾时,哪个警告灯会被触发?___
A. GEN1LINESMOKE灯;
B. BLOWERFAULT灯;
C. GEN1LINESMOKE、BLOWER和EXTRACTFAULT灯。
D.
【单选题】
当探测到货舱中有烟雾时,会发生什么?___
A. 烟雾灯亮+连续音响警告+主警告灯亮+ECAM信息;
B. IDS将烟雾警告复制到客舱;
C. 灯亮。
D.
【单选题】
地面APU发生火警,正常时如何进行灭火?___
A. 从APU灭火面板;
B. APU会自动灭火;
C. 从地面电源面板。
D.
【单选题】
电子舱烟雾探测器为:___
A. 电离式;
B. 光电式;
C. 气体式。
D.
【单选题】
电子舱烟雾探测器由哪个部件监控___
A. SDCU;
B. AEVC;
C. FDU。
D.
【单选题】
发动机灭火按钮松出后,发电系统会发生什么?___
A. IDG停止发电;
B. IDG脱开;
C. IDG发电。
D.
【单选题】
发动机灭火电门上的弹性钮的用途。___
A. 检查电门的功能;
B. 检查电门线路的连续性;
C. 检查灭火瓶的压力。
D.
【单选题】
发动机灭火探测系统的每个环路有几个探测器。___
A. 1个;
B. 2个;
C. 3个。
D.
【单选题】
飞机未通电,APU灭火瓶因过热释放,如何发现这种情况?___
A. FDU会探测到;
B. ECAM上有指示;
C. APU舱外有一红色膜片指示器。
D.
【单选题】
更换灭火瓶的注意事项:___
A. 不必拆爆炸帽;
B. 不必切断电源系统;
C. 应用保护罩保护灭火瓶释放膜片。
D.
【单选题】
火井探测组件有几个通道。___
A. 1个;
B. 2个;
C. 3个。
D.
【单选题】
货舱灭火瓶安装在何处?___
A. 前货舱侧壁板内;
B. 后货舱侧壁板内;
C. 客舱。
D.
【单选题】
客舱手提灭火瓶位于___
A. 在前后乘务员座椅下
B. 在旅客行李舱内
C. A+B。
D.
【单选题】
哪种情况会出现火警警告___
A. 环路A探测到火警;
B. 环路B探测到火警;
C. 环路A探测到火警,环路B故障。
D.
【单选题】
如果SDCU故障会发生什么?___
A. 厕所烟雾探测失效;
B. 货舱烟雾探测失效;
C. A+B+单声警告+主警戒灯亮+ECAM信息。
D.
【单选题】
如何对电子舱烟雾探测器进行测试?___
A. 一直由AEVC完成;
B. 通过按压一个专用的TEST按钮;
C. 从CFDS人工进行测试。
D.
【单选题】
如何检查APU灭火瓶的过压释放?___
A. 检查灭火瓶上的指示器;
B. 检查ECAM;
C. 检查机尾左侧的红色圆片。
D.