【单选题】
What is the correct way to replace the certificate on an existing vCenter Server that is part of a vCenter HA configuration?___
A. Put the vCenter HA in Maintenance mode, replace the certificate, exit Maintenance mode.
B. Shut down Passive and Witness nodes and replace the certificate on the Active node.
C. Remove the Passive and Witness nodes, replace the certificate, reconfigure the cluster.
D. Replace the certificate while all nodes are participating in the cluster.
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
The vSphere Data Protection performance analysis results in the “Conditionally Passed” status. What can cause this condition?___
A. The results did not meet the minimum performance expectations.
B. The read, write, and seek tests were successful.
C. The read and write tests were successful but the seek test failed.
D. The read and write tests were successful but the seek test skipped.
【单选题】
A vSphere Administrator wants to reserve 0.5 Gbps for virtual machines on each uplink on a disturbed switch that has 10 uplinks. What is the quota that should be reserved for the network resource pool?___
A. 10 Gbps
B. 5 Gbps
C. 100 Gbps
D. 0.5 Gbps
【单选题】
A vSphere administrator manages a cluster which includes critical and non-critical virtual machines. The cluster requires different permissions for contractors and non-contractors. How can the administrator exclude the contractor group from some of the critical VMs?___
A. Apply permission for both contractors and non-contractors on the cluster level.
B. Apply permission for both contractors and non-contractors on the cluster level. Remove permission on the critical VMs for contractors.
C. Remove permission for contractors on the cluster level. Apply permission on the critical VMs for noncontractors.
D. Apply permission for both contractors and non-contractors on the VMs. Remove permission on the critical VMs for contractors.
【单选题】
In an ESXi 6.5 cluster only "NFS datastore has running or registered virtual machines" returns. A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure. Which statement is true if a fifth host is added?___
A. CPU and Memory capacity will be set to 50%.
B. CPU and Memory capacity will be set to 30%.
C. CPU and Memory capacity will be set to 25%.
D. CPU and Memory capacity will be set to 20%.
【单选题】
Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?___
A. esxcli network
B. vmkping
C. net-status
D. vicfg-vmknic
【单选题】
What counter should an administrator check to determine if a virtual machine is ballooning?___
A. swapinRate
B. vmmemctltarget
C. swapped
D. vmmemctl
【单选题】
By default, how often is the vCenter vpx user password automatically changed?___
A. 15 days
B. 60 days
C. 30 days
D. 45 days
【单选题】
Which metric in the Exhibit would identify high latency for a virtual machine operating system?___
A. QAVG/cmd
B. KAVG/cmd
C. DAVG/cmd
D. GAVG/cmd
【单选题】
What VM Monitoring setting would ensure that the failure interval for a virtual machine is defined as 120 seconds?___
A. High
B. Normal
C. Low
D. Medium
【单选题】
The business managers have asked the IT administrator to ensure configuration compliance in the vSphere infrastructure. The IT administrator wants to use Host Profiles to accomplish this, but is unable to do so. Why is the administrator unable to use Host Profiles?___
A. The infrastructure uses a vSphere Standard license.
B. The infrastructure has servers with various CPU families.
C. The user has only the “Administrator” role.
D. Host Profiles apply only to storage settings.
【单选题】
What is the result of a “Consolidate” action on a virtual machine?___
A. All snapshots on the virtual machines will be deleted.
B. The virtual machine will be reverted to its last snapshot.
C. Redundant delta disks will be combined and deleted.
D. A new snapshot with memory state will be created.
【单选题】
A Telco customer is implementing NFV using vSphere as the virtualization platform. Which feature can help achieve a high packet rate with lower CPU consumption?___
A. Network I/O Control
B. SplitRX
C. ERSPAN
D. LACP
【单选题】
What is the VMware-recommended best practice for Fibre Channel zoning?___
A. soft zoning
B. single-initiator-multiple-target zoning
C. single-initiator zoning
D. single-initiator-single-target zoning
【单选题】
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?___
A. Use a VM-Host affinity rule.
B. Add the VMs to a vApp.
C. Use a VM-VM affinity rule.
D. Place the VMs in different folders.
【单选题】
vCenter Server Appliance Instance can be backed up using which Client Interface?___
A. vSphere Client Interface
B. vSphere Web Client Interface
C. VMware Host Client Interface
D. Virtual Appliance Management Interface
【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
推荐试题
【单选题】
CabinPressFault灯燃亮的条件是什么?___
A. 人工系统失效
B. 自动系统1失效
C. 自动系统均失效
D.
【单选题】
外流valve的哪个马达直接受座舱增压面板控制?___
A. MOTOR3
B. MOTOR1和MOTOR2
C. MOTOR1
D.
【单选题】
在人工模式下,系统的警告和指示来源于哪里?___
A. 控制器1
B. 控制器2
C. 外流valve
D.
【单选题】
AEVC计算机的功用是什么?___
A. 电子舱通风系统的控制与监控
B. 用于货舱通风部件的监控
C. 用于组件的监控与控制
D.
【单选题】
前货舱如何通风?___
A. 使用电子舱的空气
B. 直接使用组件出口的气体
C. 使用客舱空气
D.
【单选题】
蒙皮热交换器进口旁通valve开启的条件是什么?___
A. 开环状态
B. 在半开环状态或闭环状态(流量高于需求值)
C.
D.
【单选题】
在地面,蒙皮热交换器的工作条件是什么?___
A. 开环状态
B. 当蒙皮温度低于11℃,处于闭环状态
C. 当蒙皮温度高于11℃,处于闭环状态
D.
【单选题】
FWDISOLVALVE按钮控制什么部件?___
A. 排气扇
B. 压力调节valve
C. 隔离valve和排气风扇
D.
【单选题】
前货舱排气风扇的工作条件?___
A. 在地面或空中
B. △P≤1psi
C. 两个隔离valve均关闭
D. 以上答案均正确
【单选题】
HOTAIR按钮控制什么部件?___
A. 吹气扇
B. 压力调节valve
C. 后货舱门
D.
【单选题】
后货舱通风、加热相关信息显示在哪个页面?___
A. SD的PRESS页面
B. SD的VENT页面
C. SD的COND页面
D.
【单选题】
ACSC安装在什么位置?___
A. 前电子设备舱
B. 后电子设备舱
C. THS舱
D.
【单选题】
增强型的空调系统,空调系统控制是由什么部件完成?___
A. ACSC
B. ACSC和ZONECONTROLLER
C. PACK和ZONECONTROLLER
D.
【单选题】
下面哪个area不是增压区___
A. A.客舱
B. B.电子舱
C. C.货舱
D. D.空调舱
【单选题】
一旦将电门设置在“ON”位,空调组件将如何工作:___
A. A.自动且各自独立
B. B.B飞机离地后自动工作
C. C.C组件1正常工作,组件2备用
D. D.D发动机运转时自动工作
【单选题】
以下哪个不是空调系统的控制器___
A. A.组件控制器
B. B.area控制器
C. C.座舱增压控制器
D. D.引气管理计算机
【单选题】
货舱加温系统由哪个部件控制:___
A. A.客舱温度控制器(CTC)
B. B.货舱加热控制器(CHC)
C. C.货舱压力控制器(CPC)
D. D.电子应急通风控制器(AEVC)
【单选题】
下列哪一种情况会引起空调组件中的流量控制valve自动关闭:___
A. A.空调组件过热,发动机防火电门按出,发动机起动,水上迫降按钮按下
B. B.空调组件过热,BPRV故障,空调组件出口压力增加
C. C.C外流valve完全关闭时,发动机起动,BPRV故障
D. D.发动机防火电门按出,水上迫降按钮按下,DAPU关车后
【单选题】
组件控制器的作用是什么___
A. A.控制相应的组件和FCV
B. B.控制配平valve
C. C.控制area控制器
D. D.控制座舱增压
【单选题】
掺混空气valve由什么控制器控制?___
A. A.组件控制器
B. B.area控制器
C. C.管道过热传感器
D. D.D热空气压力调节valve
【单选题】
当ECONFLOW电门在off位时,空调的流量是___
A. A.经济流量
B. B.正常流量
C. C.经济流量+20%
D. D.正常流量+20%
【单选题】
电子舱通风系统的作用是___
A. A.避免电子舱机构损坏
B. B.确保电子舱保持足够的温度
C. C.给电子舱通风
D. D.避免电子舱有通风
【单选题】
对于ECAM座舱压力页面,描述正确的是___
A. A.当VENT指示是白色的时候,说明系统不正常
B. B.当VENT指示是黄色的时候,说明进气扇或排气扇故障
C. C.当VENT指示是黄色的时候,说明进气扇故障
D. D.当VENT指示是黄色的时候,说明排气扇有故障
【单选题】
对于南航的A320机队,以下对前后货舱加温的描述,哪个是正确的___
A. A.前货舱有加温,后货舱没有加温
B. B.前货舱没有加温,后货舱有加温
C. C.前后货舱都没有加温
D. D.前后货舱都有加温
【单选题】
对于area温度调节,以下说法正确的是___
A. A.热空气来自配平valve,冷空气来自混合总管
B. B.冷空气来自配平valve,热空气来自混合总管
C. C.热空气来自配平valve和混合总管
D. D.冷空气来自配平valve和混合总管
【单选题】
关于货舱加温,以下哪个说法是错误的___
A. A.货舱加温控制器控制和监控隔离valve和排气扇
B. B.货舱门打开时,货舱加温一样可以工作
C. C.热空气压力调节valve关闭的时候,配平valve也关闭
D. D.在空中,当压差大于1,排气扇停止工作
【单选题】
空调面板上的"HOTAIR"电门放到OFF位时___
A. A.热空气压力调节valve和配平valve关闭
B. B.空调组件旁通valve关闭以降低组件出口温度
C. C.area控制器失效
D. D.以上都不对
【单选题】
空调组件控制器PC和area控制器ZC各有几个___
A. A.PC1个,ZC1个
B. B.PC1个,ZC2个
C. C.PC2个,ZC1个
D. D.PC2个,ZC2个
【单选题】
area控制器的作用是___
A. A.控制area温度
B. B.控制流量控制valve
C. C.控制组件
D. D.控制组件控制器
【单选题】
如果设备冷却供气扇和排气扇电门放到超控位___
A. A.排气扇停止工作
B. B.蒙皮热交换器出口和入口旁通valve关闭
C. C.空调进气valve和蒙皮排气valve部分打开
D. D.以上都对
【单选题】
什么时候会出现PACKOVHT的信息___
A. A.压缩机出口过热
B. B.组件出口过热
C. C.压缩机和组件出口都过热
D. D.压缩机或组件出口过热
【单选题】
以下哪个说法是错误的___
A. A.起飞降落阶段,充压进气门全关以防止外物进入
B. B.充压进气门用于调节进入热交换器的空气流量
C. C.当需要提高温度时,旁通valve会增加开度
D. D.以上都对
【单选题】
用于调节客舱压力的配平空气必须___
A. A.与客舱空气压力一致
B. B.比客舱空气压力高4psi
C. C.比客舱空气压力小4psi
D. D.以上都不对
【单选题】
厕所和厨房通风系统用的是哪个area的空气___
A. A.驾驶仓
B. B.客舱
C. C.电子仓
D. D.货舱
【单选题】
充压进气门的作用是___
A. A.在组件失效时确保客舱通风
B. B.供气给组件压缩机
C. C.调节到热交换器的空气流量
D. D.以上都不对
【单选题】
当出现area调节故障,计算机两个通道都失效时的时候___
A. A.热空气压力调节valve和配平valve关闭
B. B.左组件固定在20度
C. C.右组件固定在10度
D. D.以上都是
【单选题】
当电子设备通风系统排气扇电门上的故障灯亮的时候___
A. A.排气压力低
B. B.计算机供电故障
C. C.烟雾警告
D. D.以上都有可能
【单选题】
当驾驶仓温度低于设定的温度时,从下ECAM空调页面可以观察到___
A. A.驾驶仓管道温度上升,驾驶仓配平valve继续打开
B. B.驾驶仓管道温度下降,驾驶仓配平valve继续打开
C. C.驾驶仓管道温度上升,驾驶仓配平valve继续关闭
D. D.驾驶仓管道温度下降,驾驶仓配平valve继续关闭
【单选题】
当组件控制器失效,温度由以下哪一个部件控制___
A. A.流量控制valve
B. B.旁通valve
C. C.防冰valve
D. D.以上都不对
【单选题】
当组件入口压力传感器探测到组件入口压力太小___
A. A.旁通valve增大开度以减小组件的压差
B. B.充压进气门增大开度
C. C.AB都不对
D. D.AB都对