【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.
【单选题】
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?___
A. esxcli system module parameters
B. esxcli storage core device
C. esxcli system module set
D. esxcli storage core adapter
【单选题】
Which statement regarding datastore clusters meets VMware’s recommended best practices?___
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).
【单选题】
What VM Monitoring setting would ensure that the maximum reset window for a virtual machine is 24 hours?___
A. Medium
B. Low
C. High
D. Normal
【单选题】
What is the default space threshold for vSphere Storage DRS?___
A. 80%
B. 70%
C. 90%
D. 95%
【单选题】
Which is the correct sequence to upgrade a vSphere infrastructure?___
A. vCenter Server>ESXi host> VMware Tools>VM compatibility
B. ESXi host>vCenter Server> VMware Tools>VM compatibility
C. vCenter host> ESXi host> VM compatibility> VMware Tools
D. ESXi host>vCenter Server> VM compatibility>VMware Tools
【单选题】
An administrator has a large boot from SAN cluster and wants to ensure consistent configuration by using host profiles. What special considerations are required for boot from SAN hosts?___
A. Change the “Device is shared clusterwide” setting to “false” in the host profile.
B. Verify that the boot LUN is correctly identified as the boot device in the host profile.
C. The boot from SAN device must report as a local device.
D. Host profiles are incompatible with boot from SAN hosts.
【单选题】
When using VMware Converter to import a Windows server and improve the consistency of the destination virtual machine, which optional step can be performed immediately prior to powering down the source server?___
A. Perform a final synchronization task.
B. Remove the server from the network.
C. Uninstall production applications.
D. Remove the server from the Active Directory domain.
【单选题】
Restoration of the vCenter Server Appliance is accomplished using which interface?___
A. vSphere Web Client
B. vSphere Client
C. vCenter Server Appliance Management Interface
D. vCenter Server Appliance GUI Installer
【单选题】
When attempting to migrate a virtual machine to another host in the same cluster, the error message, “Select a valid compute resource” returns. What could cause this error?___
A. Both hosts run different versions of ESXi.
B. Both hosts are not sharing the same datastore.
C. VMware Tools is not installed.
D. Virtual machine has an ISO attached.
【单选题】
When will vSphere Data Protection delete the expired backup image of a Platform Service Controller?___
A. Immediately after the retention period has expired.
B. After the expired backup image is restored.
C. During the next backup window following expiry.
D. During the next maintenance window following expiry.
【单选题】
Group A has permission to download files in Content Library. Group B does not have permission to download files in Content Library. If a user is a member of both groups, what will be the result?___
A. The user cannot download file from Content Library.
B. The user can download file from Content Library.
C. The user cannot access Content Library.
D. The user can access Content Library.
【单选题】
An administrator is trying to set up Host Partial Failure Response, but the Automated option is grayed out. What can the administrator change to enable the Automated option?___
A. Change the vSphere DRS Automation level to Partially Automated.
B. Change the vSphere DRS Automation level to Fully Automated.
C. Enable vSphere HA Host Monitoring.
D. Change the vSphere DPM Automation level to Automatic.
【单选题】
When you attempt to open a virtual machine console from the vSphere Web Client, the console does not connect. The following error message appears:<HTTP ERROR 404> <Problem accessin/.Reason: Not Found>. Why did not connect?___
A. Port 443 is in use.
B. Port 9443 is in use.
C. Port 8443 is in use.
D. Port 22443 is in use.
推荐试题
【多选题】
为使生产管能顺利拉入孔内,管道的___和导向孔钻杆的()应相一致,避免两角度相左,造成刮孔和增大摩擦力。
A. 入土角
B. 出土角
C. 入射角
D. 出射角
【多选题】
电气操作人员(电工)应穿戴由绝缘材料制成的20KV(最小)的电力___;
A. 工作服
B. 工人靴
C. 手套
D. 安全帽
【多选题】
施工人员不应穿过于宽松的___,以免被机器卷入或牵绊;上岗必须佩戴安全帽。
A. 衣
B. 裤
C. 鞋
D. 帽
【多选题】
合理安排电缆段长,尽量减少电缆接头的数量,严禁在变电站___等区域布置电力电缆接头。
A. 电缆夹层
B. 出站沟道
C. 竖井
D. 50米及以下桥架
【多选题】
___电缆非开挖定向钻拖拉管()工作井不宜布置电力电缆接头。
A. 110kV
B. 220kV
C. 两端
D. 前端
【多选题】
电缆通道及直埋电缆线路工程应严格按照___施工,并同步进行竣工测绘,非开挖工艺的电缆通道应进行三维测绘。应在投运前向运维部门提交竣工资料和图纸。
A. 相关标准
B. 设计要求
C. 施工标准
D. 施工要求
【多选题】
投运___年及以上的非地下变电站接地网,应定期开挖(间隔不大于 5 年),抽检接地网的腐蚀情况,每站抽检()个点。铜质材料接地体地网整体情况评估合格的不必定期开挖检查。
A. 5
B. 10
C. 5~8
D. 10~15
【多选题】
为防止地网中的大电流流经电缆___,应在开关场二次电缆沟道内沿二次电缆敷设截面积不小于100mm2的专用铜排(缆)。
A. 屏蔽层
B. 绝缘层
C. 100mm2
D. 200m2
【多选题】
专用铜排(缆)的一端在开关场的每个就地___处与主地网相连,另一端在()的电缆沟道入口处与主地网相连,铜排不要求与电缆支架绝缘。
A. 端子箱
B. 保护室
C. 接地箱
D. 接地室
【多选题】
新投运变电站不同站用变压器低压侧至站用电屏的电缆应尽量___同沟敷设,对无法避免的,则应采取()措施。
A. 使用
B. 避免
C. 封堵措施
D. 防火隔离
【多选题】
交直流回路()共用一根电缆,控制电缆___与动力电缆并排铺设。对不满足要求的运行变电站,应采取加装防火隔离措施。
A. 可以
B. 应
C. 不得
D. 不应
【多选题】
直流电源系统应采用()。两组及以上蓄电池组电缆,应分别铺设在各自独立的通道内,并尽量沿___路径敷设。在穿越电缆竖井时,两组蓄电池电缆应分别加穿金属套管。对不满足要求的运行变电站,应采取防火隔离措施。
A. 阻燃电缆
B. 最短
C. 普通电缆
D. 最长
【多选题】
变压器中、低压侧至配电装置采用电缆连接时,应采用___电缆;运行中的()电缆,应结合全寿命周期及运行情况进行逐步改造。
A. 单芯
B. 三芯
C. 三相绕包
D. 三相统包
【多选题】
全电缆线路禁止采用重合闸,对于含电缆的混合线路应根据电缆线路___等实际情况采取停用重合闸等措施,防止变压器连续遭受短路冲击。
A. 距离入口的位置
B. 电缆的长度
C. 距离出口的位置
D. 电缆线路的比例
【多选题】
扩孔的目的是将孔径扩大至能容纳所要铺设的生产管线大小要求,最终扩孔直径大小应根据___和()确定。
A. 地形条件
B. 生产条件
C. 地层条件
D. 生产管道类型
【判断题】
开挖技术是在不开挖地表的条件下或以最小的地表开挖工作量进行各种中小直径地下管线铺设、更换、修复和定位的施工技术。
A. 对
B. 错
【判断题】
水平定向钻孔是利用水平定向钻机以不可控钻孔轨迹的施工方法,在相同地层和深度进行钻进,通过导向系统使钻头沿着设计方向(轨迹)钻进并到达设计位置出口。
A. 对
B. 错
【判断题】
起始工作坑是为水平定向钻进施工导向孔、扩孔钻进及拉管就位存储、回收泥浆和确定起始入口位置而开挖的工作坑。
A. 对
B. 错
【判断题】
出口工作坑是为回收、储存水平定向钻进施工中排出的泥浆和确定出口位置而开挖的工作坑。
A. 对
B. 错
【判断题】
穿越是在地表下避开障碍物进行开挖铺设管线。
A. 对
B. 错
【判断题】
钻井泥浆是指水和膨润土或聚合物的混合物,有时还需加入某些处理剂主要用于钻进施工中的冷却、润滑钻具、护壁和悬浮携带岩屑。
A. 对
B. 错
【判断题】
导向孔是利用水平定向钻机,沿设计轨迹施工完成的初始钻孔。
A. 对
B. 错
【判断题】
导向孔轨迹是导向孔钻进时,导向钻头移动路线的变化位置。
A. 对
B. 错
【判断题】
入、出土角是在水平定向钻进,施工过程中钻头进入地层或从地层钻出时,钻杆柱与水平面的夹角。
A. 对
B. 错
【判断题】
顶角是钻孔轴线在给定点的切线与通过该点与垂直面之间的夹角。
A. 对
B. 错
【判断题】
钻孔轴线在水平面上的投影或钻孔轴线在给定点上的切线在水平面上的投影与正北方向之间的夹角。
A. 对
B. 错
【判断题】
导向系统是提供方位角、顶角及导向孔施工状态等参数的系统。
A. 对
B. 错
【判断题】
扩孔是为达到与水平定向钻进管线铺设相适应的孔径,用回扩钻头缩小孔径的施工过程。
A. 对
B. 错
【判断题】
回啦是生产管通过钻杆从钻孔的出土点一侧,沿扩孔后的孔洞,回拉至钻杆入土点一侧的施工过程,亦称拉管就位。
A. 对
B. 错
【判断题】
生产管是为各种建设目的而铺设的各类永久性地下管线。
A. 对
B. 错
【判断题】
水平定向钻进导向孔施工过程,连续不断地检测有关钻孔信息的测量技术。
A. 对
B. 错
【判断题】
工程设计前应进行工程勘察,调查分析施工区域内有关各方面情况,充分掌握现场资料。
A. 对
B. 错
【判断题】
非定向钻铺管使用管材通常为钢管、PE管和PVC管等,其材质及性能应符合国家有关现行标准及相应规定。
A. 对
B. 错
【判断题】
施工中所配制的钻进泥浆应根据地层条件合理使用,并做好环保、安全防护,文明施工。
A. 对
B. 错
【判断题】
施工时和施工完成后,铺设管线的下覆土层及相邻建筑物不得沉陷、坍塌或隆起,相邻或相交管线及地下构筑物不受损坏。
A. 对
B. 错
【判断题】
定向钻铺管设计、施工、监理等单位必须具有专业资质。
A. 对
B. 错
【判断题】
定向钻铺管施工操作人员必须经培训考核合格后,方能上岗操作施工,同时应遵守相应的安全操作技术规程。
A. 对
B. 错
【判断题】
定向钻铺管工程质量应符合各类地下管线的质量标准。
A. 对
B. 错
【判断题】
定向钻铺管施工前应进行现场勘察。工程勘察应符合《岩土工程勘察规范》GB50021、《岩土工程勘察规范》DBJ13-84和《城市地下管线探测技术规程》CJJ61的规定。
A. 对
B. 错
【判断题】
工程勘察时,应由建设单位(甲方或业主)提供管线工程平面图、既有管线地下管网图、工程技术要求。
A. 对
B. 错