【单选题】
Which term is most closely aligned with the basic purpose of a SIEM solution? ___
A. Non-Repudiation
B. Accountability
C. Causality
D. Repudiation
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
You have just deployed SNMPv3 in your environment, Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request?___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port?___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch?___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature, what is the effect on the parent signature and the family of subsignatures?___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected, the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks?___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device?___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection?___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security?___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true? ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication,authorization,and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10?___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center?___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true?___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed?___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
1.三相刀开关的图形符号与交流接触器的主触点符号是___。
A. 一样的
B. 可以互换
C. 有区别的
D. 没有区别
【单选题】
2.刀开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
3.行程开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
4.交流接触器的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
5.熔断器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
6.热继电器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
7.交流接触器的作用是可以___接通和断开负载。
A. 频繁地
B. 偶尔
C. 手动
D. 不需
【单选题】
8.三相异步电动机的启停控制线路由电源开关、熔断器、___、热继电器、按钮等组成。
A. 时间继电器
B. 速度继电器
C. 交流接触器
D. 漏电保护器
【单选题】
9.三相异步电动机的启停控制线路中需要有___、过载保护和失压保护功能。
A. 短路保护
B. 超速保护
C. 失磁保护
D. 零速保护
【单选题】
10维修电工以___、安装接线图和平面布置图最为重要。
A. 电气原理图
B. 电气设备图
C. 电气安装图
D. 电气组装图
【单选题】
11.熔断器的额定电压应___线路的工作电压。
A. 远大于
B. 不等于
C. 小于等于
D. 大于等于
【单选题】
12.对于电阻性负载,熔断器熔体的额定电流___线路的工作电流。
A. 远大于
B. 不等于
C. 等于或略大于
D. 等于或略小于
【单选题】
13.对于电动机负载,熔断器熔体的额定电流应选电动机额定电流的___倍。
A. 1~1.5
B. 1.5-2.5
C. 2.0~3.0
D. 2.5~3.5
【单选题】
14.使用快速熔断器时,一般按___来选择。
A. IN=1.03IF
B. IN=1.57IF
C. IN=2.57IF
D. IN=3IF
【单选题】
15.断路器中过电流脱扣器的额定电流应该大于等于线路的___。
A. 最大允许电流
B. 最大过载电流
C. 最大负载电流
D. 最大短路电流
【单选题】
16.短路电流很大的电气线路中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
推荐试题
【判断题】
路肩宽度一般应不小于0.6m,困难地段不得小于0.4m
A. 对
B. 错
【判断题】
电缆沿路堑埋设时,应在堑顶天沟边2m以外,如无天沟,应在堑顶边3米以外埋设
A. 对
B. 错
【判断题】
使用木枕应遵循木枕宽面在下,顶面与底面同宽时,应使树心一面向上
A. 对
B. 错
【判断题】
道岔与道岔之间可以铺设与过渡轨枕不同规格的轨枕
A. 对
B. 错
【判断题】
曲线地段外股应使用标准长钢轨,内股应使用厂制缩短轨调整钢轨接头位置
A. 对
B. 错
【判断题】
25m钢轨铺设在当地历史最高、最低轨温差大于85℃的地区应个别设计
A. 对
B. 错
【判断题】
尖轨尖端轨距加宽,按不大于3‰递减至基本轨接头
A. 对
B. 错
【判断题】
木枕地段捣固时,应在钢轨两侧各300mm范围内捣实道床,轨下部分加强捣固
A. 对
B. 错
【判断题】
在风力较小条件下,拉绳测量每个测点正矢,测量二次取平均值
A. 对
B. 错
【判断题】
碎石道床枕木盒清筛深度为枕底向下50~100mm,并做好排水坡
A. 对
B. 错
【判断题】
尖轨尖处轨距的作业验收的容许偏差管理值为±2 mm
A. 对
B. 错
【判断题】
钢轨标记轧制在轨腰上,传统上有凸标和凹标两种,凸起的标志为厂标、钢轨类型、钢种代号、制造日期,凹下的标志为炉罐号
A. 对
B. 错
【判断题】
地铁列车速度较高的铁路上,主要发生波纹磨耗,且主要出现在直线和制动地段
A. 对
B. 错
【判断题】
钢轨接头联结零件是由夹板、螺栓、弹簧垫圈和扣件等组成
A. 对
B. 错
【判断题】
混凝土枕钢筋或钢丝外露,钢筋未锈蚀,长度超过80mm,判定为重伤
A. 对
B. 错
【判断题】
混凝土枕碎石道床顶面应与轨枕中部顶面平齐,木枕碎石道床顶面应低于木枕顶面20mm
A. 对
B. 错
【判断题】
长度大于100m的隧道内和隧道外U形结构地段及高架桥和大于50m的单体桥地段,宜采用短枕式或长枕式整体道床
A. 对
B. 错
【判断题】
整体道床应设置伸缩缝,隧道内宜每隔12.5m,形结构地段和高架桥上宜每隔6m设置一个
A. 对
B. 错
【判断题】
在结构沉降缝和高架桥梁缝处,可不设置道床伸缩缝
A. 对
B. 错
【判断题】
排水沟的纵向坡度应与线路坡度一致,线路平坡地段,排水沟纵向坡度不宜小于3%
A. 对
B. 错
【判断题】
短轨枕在工厂预制,混凝土强度等级为C40,其横断面为梯形,底部外露钢筋钩,以加强道床混凝土的联结
A. 对
B. 错
【判断题】
地下线道床排水沟纵向坡度宜与线路坡度一致
A. 对
B. 错
【判断题】
线路平坡地段,排水沟纵向坡度不宜小于2‰
A. 对
B. 错
【判断题】
车场线有砟道床的道床肩宽不应小于200mm
A. 对
B. 错
【判断题】
无缝线路应设置位移观测桩,设置的基础应牢固稳定。钢轨伸缩调节器和道岔应按一个单元轨节设置位移观测桩
A. 对
B. 错
【判断题】
减振级别宜划分为中等减振、高等减振和特殊减振
A. 对
B. 错
【判断题】
车场线终端应采用滑动式车挡
A. 对
B. 错
【判断题】
警冲标应设在两设备限界相交处,其余线路标志应安装在行车方向右侧司机易见的位置
A. 对
B. 错
【判断题】
路基应有完善的排水系统,并宜与市政排水设施相结合
A. 对
B. 错
【判断题】
路基排水纵坡不应小于2‰,单面排水坡段长度不宜大于400m
A. 对
B. 错
【判断题】
维修工作,必须掌握设备技术状态变化规律,贯彻“安全第一,预防为主”的原则
A. 对
B. 错
【判断题】
道岔范围内不设轨底坡,若与有轨底坡轨道连接时,道岔前后两根轨枕铁垫板下设轨底顺坡垫板过渡
A. 对
B. 错
【判断题】
60kg/m钢轨9号单开道岔采用相离圆曲线线型,60AT弹性可弯尖轨,尖轨尖端采用藏尖式,跟端采用间隔铁结构
A. 对
B. 错
【判断题】
轨下部位混凝土道床厚度,直线地段不宜小于130mm、曲线地段不宜小于110mm
A. 对
B. 错
【判断题】
进行绝缘接头拆卸作业时,需通号人员配合,长柄工具应有绝缘套,作业中不得将两股钢轨搭接
A. 对
B. 错
【简答题】
目红
【简答题】
脉诊:儿童一次呼吸大约?次
【简答题】
脉分为?
【简答题】
左手 寸 重按对应?轻按对应?
【简答题】
左手 关 重按对应? 轻按对应?