【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
推荐试题
【多选题】
符合下列___条件的为一级基坑。
A. 重要工程或支撑结构作主体结构的一部分
B. 开挖深度大于10m
C. 与临近建筑物重要设施的距离在开挖深度以内的基坑
D. 基坑范围内有历史文物,近代优秀建筑重要管线等严加保护的基坑
E. 开挖深度大于7m
【多选题】
土方开挖的顺序、方法必须与设计工况相一致并遵循下列原则:___。
A. 开挖先撑
B. 先撑开挖
C. 分层开挖
D. 严禁超挖
E. 边撑边挖
【多选题】
挡土墙的形式有:___。
A. 重力式挡土墙
B. 钢筋混凝土挡土墙
C. 锚杆挡土墙
D. 锚定板挡土墙
E. 其他轻型挡土墙
【多选题】
挡土墙的主要作用有:___。
A. 维护土体边坡稳定
B. 防止坡体的滑移
C. 防止土方边坡的坍塌
D. 防止土体的滑移
E. 防止土方的坍塌
【多选题】
斜坡土挖方时在斜坡的上侧弃土时应注意:___。
A. 弃土堆应连续设置,顶面外斜
B. 应保证挖方边坡的稳定
C. 当坡度陡于1/5或在软土地区禁止上侧堆土
D. 弃土堆离沟边0.8m以外
E. 堆土高度不能超过1.5m
【多选题】
基坑(槽)排水的方法有:___。
A. 集水井法
B. 排水沟法
C. 集水井抽水法
D. 明排水法
E. 人工降低地下水法
【多选题】
人工降低地下水位方法有:___。
A. 轻型井点
B. 喷射井点
C. 管井井点
D. 深井泵
E. 由渗井点
【多选题】
土石方工程的主要内容包括:___。
A. 挖掘、运输
B. 填筑、压实
C. 排水降水
D. 土壁支撑设计
E. 施工准备
【多选题】
土方工程施工前,应___。
A. 分析该工程的功能
B. 分析核对实测地形图核对
C. 水文地质工程质量资料
D. 地下管道电缆通信
E. 地下构筑物
【多选题】
在膨胀土地区开挖时要符合___。
A. 开挖
B. 作垫层
C. 基础施工
D. 回填土连续进行
E. 工程验收
【多选题】
基坑开挖过程中如何排水?___。
A. 在坑底设集水井
B. 沿坑底的周围或中央开挖排水沟
C. 把水引入集水井
D. 然后用水泵抽走
E. 抽出的水应予以引开,严防倒流
【多选题】
基坑支护结构设计,应考虑的荷载有:___。
A. 土压力
B. 地下水压力
C. 影响范围内建筑物、构筑物荷载
D. 施工荷载,堆放材料、汽车、吊车、浇筑混凝土泵车
E. 路面行人的重量
【多选题】
基础土方工程施工组织设计应包括下列内容:___。
A. 勘察测量,场地平整方案
B. 排水、降水设计、支护结构体系选择和设计
C. 土方开挖方案设计
D. 基坑及周围建筑、构筑物道路管道的监测方案和保护措施
E. 楼板及屋面板混凝土浇筑方案
【多选题】
一般模板的组成部分为___。
A. 模板面
B. 支撑结构
C. 连接配件
D. 加固结构
E. 螺栓
【多选题】
模板工程专项施工组织设计应包括___。
A. 模板结构设计计算书
B. 模板结构布置图、构件详图、节点大样
C. 安装与拆除程序与方法
D. 基坑支护方案
E. 施工安全、消防措施
【多选题】
模板按其功能分类,常用的模板主要有___。
A. 定型组合模板
B. 墙体大模板
C. 飞模
D. 滑动模板
E. 柱模板、梁模板
【多选题】
模板工程所使用的材料可以是___。
A. 钢材
B. 木材
C. 铝合金
D. 竹材
E. 铜材
【多选题】
模板结构恒荷载、活荷载标准值有___。
A. 新浇筑混凝土自重标准值
B. 施工人员及设备荷载标准值
C. 振捣混凝土时产生的荷载标准值
D. 倾倒混凝土时,对侧模的水平荷载标准值
E. 工程竣工后的使用荷载标准值
【多选题】
扣件式钢管模板支架立杆底部通常应设置___。
A. 底座
B. 通长木垫板(板长大于2个立杆间距)板厚不小于50mm
C. 混凝土底板
D. 钢柱脚
E. 素土
【多选题】
直接夹紧柱模板的柱箍常使用___。
A. 扁钢
B. 角钢
C. 槽钢
D. 木楞
E. 竹杆
【多选题】
采用对角楔木调整支撑高度时___。
A. 楔木应接触紧密
B. 应和垫木顶紧
C. 应使用铁钉固定牢靠
D. 应使用砖块垫牢
E. 应使用石块垫牢
【多选题】
旧扣件应检查的项目有___。
A. 裂缝
B. 变形
C. 螺栓滑丝
D. 采购证明
E. 扣件重量
【多选题】
扣件式钢管应检查的项目有___。
A. 质量合格证
B. 质量检验报告
C. 是否平直、光滑、不应有裂缝、结疤、分层硬弯、压痕和深刻划道等
D. 采购合同
E. 钢管的表面硬度
【多选题】
扣件式钢管支架使用中应定期检查的项目有___。
A. 地基积水,底座松动,立杆悬空
B. 扣件螺栓松动
C. 立杆沉降与垂直偏差
D. 安全防护是否完好
E. 立柱是否沾满了混凝土
【多选题】
钢管不得使用的疵病有___。
A. 不符设计要求
B. 严重锈蚀
C. 严重弯曲
D. 压扁
E. 裂纹
【多选题】
建筑工程模板承受的恒荷载标准值的种类有___。
A. 模板及其支架自重
B. 新浇混凝土自重
C. 钢筋自重
D. 立柱自重
E. 新浇筑混凝土作用于模板的侧压力
【多选题】
门式钢管支架验收时应有的文件为___。
A. 施工组织设计
B. 门式钢管脚手架的出厂合格证和质量检验报告
C. 监理实施细则
D. 搭设中重要问题处理记录
E. 模板支架施工验收报告
【多选题】
门式钢管支架验收现场的检查项目有___。
A. 构配件齐全,质量合格,连接件牢固
B. 防护设施符合规定
C. 基础符合要求
D. 水平度与垂直度合格
E. 验收人员培训证明
【多选题】
安装模板时应作到___。
A. 不得漏浆
B. 尺寸统一
C. 模板上下用人接送
D. 随装随运
E. 严禁抛掷
【多选题】
吊运散装模板时,应做到___。
A. 放置于运料平台上
B. 码放整齐
C. 单块吊运
D. 待捆绑牢固后方可起吊
E. 有防吊运过程中散落的措施
【多选题】
安装独立梁模板时应设安全操作平台,严禁操作人员___。
A. 站在独立梁底模上操作
B. 站在模板支架上操作
C. 站在柱模支架上操作
D. 站在扶梯上操作
E. 在底模、柱模支架上通行
【多选题】
地锚基坑前方地锚出线点(即钢丝绳穿过土层后露出地面处)前方坑深2.5倍范围及基坑两侧2m范围以内,不得有___。
A. 地沟
B. 电缆
C. 地下管道
D. 地下煤气管
E. 临时挖沟
【多选题】
脚手架所用钢管应采用Q23SA钢,此钢材的重要质量标准和性能是___。
A. 标准屈服强度不低于235N/mm2
B. 可焊性能好
C. 抗锈蚀性能好
D. 低温下抗冲击性好
E. 管壁厚度不均匀
【多选题】
脚手架所用钢管使用时,应注意:___。
A. φ48×3.5与φ51×3的钢管不得混用
B. φ48×3.5与φ51×3的钢管可以混用
C. φ51×3与φ32×2的钢管可以混用
D. 钢管上严禁打孔
E. 开孔不影响钢管的使用
【多选题】
在荷载分类中,将脚手板重量归于___。
A. 可变荷载
B. 永久荷载
C. 施工荷载
D. 构配件自重
E. 临时荷载
【多选题】
设计承重脚手架时,应根据使用过程中可能出现的荷载取其最不利组合进行计算,因此___。
A. 对纵、横向水平杆的强度、变形计算应考虑:永久荷载+0.9(施工荷载+风荷载)的组合
B. 对纵、横向水平杆的强度、变形计算应考虑:永久荷载+施工荷载的组合
C. 对立杆稳定应考虑:永久荷载+施工荷载和永久荷载+0.9(施工荷载+风荷载)的两种组合
D. 对立杆稳定应考虑:永久荷载+施工荷载和永久荷载+施工荷载+风荷载的两种组合
E. 对立杆的稳定只考虑竖向荷载
【多选题】
纵、横向水平杆的计算内容应有___。
A. 抗弯强度和挠度
B. 抗剪强度和挠度
C. 抗压强度和挠度
D. 与立杆连接扣件的抗滑承载力
E. 地基承载力
【多选题】
为保证脚手架立杆的安全使用,规范规定对其计算内容应有___。
A. 抗压强度
B. 稳定
C. 容许长细比
D. 抗弯强度
E. 抗剪强度
【多选题】
计算脚手架立杆稳定时,应进行不同的荷载效应组合,它们是___。
A. 永久荷载+施工荷载
B. 永久荷载+0.9施工荷载
C. 永久荷载+施工荷载+风荷载
D. 永久荷载+0.9(施工荷载+风荷载)
E. 永久荷载
【多选题】
计算立杆稳定性时,应选取其危险部位(或称最不利部位),当脚手架以相同步距、纵距、横距和连墙件布置,且风荷载不大时,危险部位在___。
A. 脚手架顶层立杆段
B. 脚手架半高处立杆段
C. 脚手架底层立杆段
D. 双管立杆变截面处的单立杆段
E. 双管立杆的双管立杆段