【单选题】
Which feature facilitates the sharing of templates via vCenter Server?___
A. Content Library
B. OVF
C. folders
D. vApp
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
A vSphere Administrator is in the process of configuring replication for a virtual machine, but is not able to select the Recovery Point Objective (RPO) value of 5 minutes. Which statement could explain why the RPO value cannot be lower than 15 minutes?___
A. The OS quiescing option is selected for Replication options.
B. The virtual machine hardware version is not compatible.
C. The target and source sites use different types of datastores.
D. The target and source sites are not using VMFS 6.0 datastore.
【单选题】
What advanced parameter defines a custom isolation IP address for a vSphere HA cluster?___
A. das.usedefaultisolationaddress
B. das.isolationshutdowntimeout
C. fdm.isolationpolicydelaysec
D. das.isolationaddress
【单选题】
Which method is supported for backing up the virtual machine that contains vCenter Server?___
A. differential
B. incremental
C. full image
D. individual disks
【单选题】
A vSphere Administrator must ensure that a user is able to view and manage the system configuration in vSphere Web Client. In the vCenter Single Sign-On domain, which group should the user be a part of?___
A. SystemConfiguration.BashShellAdministrators
B. ComponentManager. Administrators
C. Administrators
D. SystemConfiguration.Administrators
【单选题】
What is the minimum number of hosts that must contribute capacity to a non-ROBO single site VMware vSAN cluster?___
A. 1
B. 64
C. 3
D. 2
【单选题】
Which guest operating system supports PVRDMA?___
A. Windows (32-Bit)
B. Linux (32-Bit)
C. Windows (64-Bit)
D. Linux (64-Bit)
【单选题】
What is the correct way to replace the certificate on an existing vCenter Server that is part of a vCenter HA configuration?___
A. Put the vCenter HA in Maintenance mode, replace the certificate, exit Maintenance mode.
B. Shut down Passive and Witness nodes and replace the certificate on the Active node.
C. Remove the Passive and Witness nodes, replace the certificate, reconfigure the cluster.
D. Replace the certificate while all nodes are participating in the cluster.
【单选题】
The vSphere Data Protection performance analysis results in the “Conditionally Passed” status. What can cause this condition?___
A. The results did not meet the minimum performance expectations.
B. The read, write, and seek tests were successful.
C. The read and write tests were successful but the seek test failed.
D. The read and write tests were successful but the seek test skipped.
【单选题】
A vSphere Administrator wants to reserve 0.5 Gbps for virtual machines on each uplink on a disturbed switch that has 10 uplinks. What is the quota that should be reserved for the network resource pool?___
A. 10 Gbps
B. 5 Gbps
C. 100 Gbps
D. 0.5 Gbps
【单选题】
A vSphere administrator manages a cluster which includes critical and non-critical virtual machines. The cluster requires different permissions for contractors and non-contractors. How can the administrator exclude the contractor group from some of the critical VMs?___
A. Apply permission for both contractors and non-contractors on the cluster level.
B. Apply permission for both contractors and non-contractors on the cluster level. Remove permission on the critical VMs for contractors.
C. Remove permission for contractors on the cluster level. Apply permission on the critical VMs for noncontractors.
D. Apply permission for both contractors and non-contractors on the VMs. Remove permission on the critical VMs for contractors.
【单选题】
In an ESXi 6.5 cluster only "NFS datastore has running or registered virtual machines" returns. A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure. Which statement is true if a fifth host is added?___
A. CPU and Memory capacity will be set to 50%.
B. CPU and Memory capacity will be set to 30%.
C. CPU and Memory capacity will be set to 25%.
D. CPU and Memory capacity will be set to 20%.
【单选题】
Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?___
A. esxcli network
B. vmkping
C. net-status
D. vicfg-vmknic
【单选题】
What counter should an administrator check to determine if a virtual machine is ballooning?___
A. swapinRate
B. vmmemctltarget
C. swapped
D. vmmemctl
【单选题】
By default, how often is the vCenter vpx user password automatically changed?___
A. 15 days
B. 60 days
C. 30 days
D. 45 days
【单选题】
Which metric in the Exhibit would identify high latency for a virtual machine operating system?___
A. QAVG/cmd
B. KAVG/cmd
C. DAVG/cmd
D. GAVG/cmd
【单选题】
What VM Monitoring setting would ensure that the failure interval for a virtual machine is defined as 120 seconds?___
A. High
B. Normal
C. Low
D. Medium
【单选题】
The business managers have asked the IT administrator to ensure configuration compliance in the vSphere infrastructure. The IT administrator wants to use Host Profiles to accomplish this, but is unable to do so. Why is the administrator unable to use Host Profiles?___
A. The infrastructure uses a vSphere Standard license.
B. The infrastructure has servers with various CPU families.
C. The user has only the “Administrator” role.
D. Host Profiles apply only to storage settings.
【单选题】
What is the result of a “Consolidate” action on a virtual machine?___
A. All snapshots on the virtual machines will be deleted.
B. The virtual machine will be reverted to its last snapshot.
C. Redundant delta disks will be combined and deleted.
D. A new snapshot with memory state will be created.
【单选题】
A Telco customer is implementing NFV using vSphere as the virtualization platform. Which feature can help achieve a high packet rate with lower CPU consumption?___
A. Network I/O Control
B. SplitRX
C. ERSPAN
D. LACP
【单选题】
What is the VMware-recommended best practice for Fibre Channel zoning?___
A. soft zoning
B. single-initiator-multiple-target zoning
C. single-initiator zoning
D. single-initiator-single-target zoning
【单选题】
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?___
A. Use a VM-Host affinity rule.
B. Add the VMs to a vApp.
C. Use a VM-VM affinity rule.
D. Place the VMs in different folders.
【单选题】
vCenter Server Appliance Instance can be backed up using which Client Interface?___
A. vSphere Client Interface
B. vSphere Web Client Interface
C. VMware Host Client Interface
D. Virtual Appliance Management Interface
【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
推荐试题
【单选题】
110.液压系统在连续运转一定时间后,应检查油液的温度,不应超过规定值___。
A. 35~60
B. 45~60
C. 60~70
D. 70~80.
【单选题】
小型“V”型铁一般用中碳钢经___加工后淬火磨削而成。
A. 刨削
B. 车削
C. 铣削
D. 钻削
【单选题】
127.分度头的规格是以主轴中心线至___来表示的。
A. 顶现距离
B. 左边宽度
C. 底面高度
D. 右边宽度
【单选题】
128.划线时选择工件上某个点、线、面为依据,用它来确定工件各部分尺寸和几何形状的___。
A. 工序基准
B. 设计基准
C. 划线基线
D. 工步基准
【单选题】
129.平面划线一般要选择___基准。
A. 一个
B. 两个
C. 三个
D. 四个
【单选题】
130.毛坯工件通过找正后划线,可使加工表面与不加工表面之间保持___。
A. 尺寸均匀
B. 形状正确
C. 位置准确
D. 尺寸不均匀
【单选题】
细刮道的契角为___左右。
A. 90°~92.5°
B. 95°
C. 97.5°
D. 99°
【单选题】
139.头部有四个带圆弧刀刃的曲面刮刀是___。
A. 三筒刮刀
B. 蛇头刮刀
C. 柳叶刮刀
D. 平刮刀
【单选题】
140.显示剂调和的稀稠应适当,粗刮时显示剂应调得___一些。
A. 稀
B. 稠
C. 厚
D. 薄
【单选题】
141.显示剂应用于精刮时可调稠一些,涂层___而均匀。
A. 厚
B. 稀
C. 稠
D. 薄
【单选题】
142.平时刮削用挺刮法,刮刀与刮削面成___角。
A. 10°~20°
B. 25°~30°
C. 35°~40°
D. 40°~45°
【单选题】
刮削原始平板,出现同向扭曲现象时,可用___方法纠正。
A. 对角研
B. 调头研
C. 直角研
D. 正研
【单选题】
147.通用平版的精度共分四级,___级精度最高。
A. 0
B. 1
C. 2
D. 3
【单选题】
148.只用于硬质合金 、硬铬、宝石、玛瑙和陶瓷等高硬工件精研磨加工的磨料是___。
A. 氧化铝系
B. 碳化物系
C. 金刚石系
D. 其他类
【单选题】
149.经过研磨后,工件的尺寸精度可达到___mm。
A. 0.1~0.5
B. 0.01~0.05
C. 0.001~0.005
D. 0.0001~0.0005
【单选题】
150.研具材料比被研磨的工件___。
A. 硬
B. 软
C. 软硬均匀
D. 可能软可能硬
【单选题】
研磨孔径时,有槽的研磨棒用于___。
A. 精研磨
B. 粗研磨
C. 精、粗研磨均可
D. 平面研磨
【单选题】
157.手工精研磨一般平面,速度每分钟往复___次为宜。
A. 40~60
B. 80~100
C. 20~40
D. 10~20
【单选题】
158.Y38—1型滚齿机,滚切直齿机,滚切直齿圆柱齿轮的最大加工模数,铸铁件为___。
A. 4mm
B. 6mm
C. 8mm
D. 10mm
【单选题】
159.Y38—1型滚齿机,滚切直齿圆柱齿轮的最大加工模数,钢件为___。
A. 3mm
B. 4mm
C. 6mm
D. 8mm
【单选题】
160.磨窗主轴两端锥面接触面要求为:左端锥面大于等于___。
A. 40%
B. 60%
C. 80%
D. 90%
【单选题】
162.在传动链中,中间传动件的制造误差对未端件运动精度的影响是___。
A. 误差被放大
B. 误差被减小
C. 误差可能大可能小
D. 对误差无影响
【单选题】
163.若传动链中的齿轮存在每转一周多次重复的转角误差,则会影响传动时的___。
A. 传动功率
B. 传动效率
C. 运动准确性
D. 运动平稳性
【单选题】
164.精密磨床主轴中心孔是主轴上个圆柱表面加工时的___。
A. 设计基准
B. 划线基准
C. 原始基准
D. 回转基准
【单选题】
165.精密机床床身导轨的修复主要采用___方法。
A. 刨削
B. 磨削
C. 刮削
D. 铣削
【单选题】
166.在最高速运转时,主轴稳定温度为:滑动轴承不能超过___C°
A. 50
B. 60
C. 80
D. 70
【单选题】
174.装配精度完全依赖于零件加工精度的装配方法是___法。
A. 选配法
B. 调整法
C. 修整法
D. 完全互换法
【单选题】
175.装配时,用可换垫片、衬套和镶条等消除零件间积累误差和配合间隙的方法是___。
A. 选配法
B. 调整法
C. 修整法
D. 完全互换法
【单选题】
176.直接进入组件装配的不见称___。
A. 零件
B. 组件
C. 分组件
D. 一级分组件
【单选题】
177.对机构或机器运转的灵活性、振动、工作温升、噪声、转速、功率等性能参数的检验属于___。
A. 几何精度
B. 工作精度
C. 试车
D. 调整
【单选题】
178.当双头螺栓旋入软材料时,其过盈量要适当___。
A. 大些
B. 小些
C. 跟硬材料一样
D. 过大些
【单选题】
双头螺栓与机体连接时,其轴心线必须与机体表面垂直,可用___检查。
A. 角尺
B. 百分表
C. 游标卡尺
D. 块规
【单选题】
197.过盈连接配合表面的加工精度要求较高,否则___。
A. 加工困难
B. 装配困难
C. 加工容易
D. 装配容易
【单选题】
198.过盈连接的配合表面其粗糙度一般要求达到___。
A. Ra 0.8
B. Ra 1.6
C. Ra 3.2
D. Ra 6.3
【单选题】
202.圆锥面过盈连接是依靠空、轴相对___位移而实现相互压紧的。
A. 轴向
B. 径向
C. 旋向
D. 同步
【单选题】
203.圆锥面过盈连接配合面锥度小时,所需___小。
A. 径向力
B. 切向力
C. 轴向力
D. 向心力
【单选题】
205.用铅丝法检验齿侧间隙,铅丝被挤压后,___的尺寸为侧隙。
A. 最厚处
B. 最薄处
C. 厚薄平均值
D. 厚处二分之一
【单选题】
206.一般情况下,动力齿轮的工作平衡性和接触精度都应比运动精度___。
A. 高一级
B. 低一级
C. 相同
D. 高两级
【单选题】
207.压装齿轮时,要尽量避免齿轮偏心歪斜和端面未贴紧轴肩等___误差。
A. 尺寸
B. 形状
C. 位置
D. 安装
【单选题】
208.齿轮联轴器的内齿轮,轴向应有一定的游动量以保证两轴都有___空间。
A. 存油空隙
B. 受力变形
C. 热胀冷缩
D. 磨损