【单选题】
Which type of social engineering attack targets top executives?___
A. whaling
B. vishin
C. spear phishing ng
D. baiting
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
What is the minimum Cisco lOS version that supports zone-based firewalls?___
A. 12.1T
B. 15.1
C. 15.0
D. 124
【单选题】
In which type of attack does an attacker overwrite an entry in the CAM table to divert traffic destined to a legitimate host?___
A. DHCP spoofing
B. ARP spoofing
C. CAM table overflow
D. MAC spoofing
【多选题】
Which two attack types can be prevented with the impleme ntation of a Cisco IPS solution?___
A. DDos
B. man-in-the-middle
C. worms
D. ARP spoofing
E. VLAN hopping
【多选题】
choose four___
A. DHCP snooping ——————————blocks DHCP messages
B. Dynamic ARP inspection——————verifies IP-to-MAC traffic on untrusted ports
C. IP sources guard ——————————provides layer 2 interface security with ports ACLs
D. Port security————————————mitigates MAC-address spoofing at the access interface
【多选题】
choose four___
A. Step1————————run the system setup wizard
B. Step2————————add an authentication realm
C. Step3————————configure identity management
D. Step4————————configure directory group
【多选题】
What are two advanced features of the Cisco AMp solution for endpoints ___
A. contemplation
B. foresight
C. sandboxing
D. reputation
E. reflection
【多选题】
Which two characteristics of RADIUS are true?___
A. It encrypts only the password between user and server.
B. It uses TCP ports 1812/1813
C. It uses UDP ports 1812/1813.
D. It uses UDP port 49
E. It uses TCP port 49
【多选题】
What are two challenges of using a network-based IPS? ___
A. It is unable to determine whether a detected attack was successful
B. It requires additional storage and proce ssor capacity on syslog servers
C. As the network expands, it requires you to add more sensors.
D. It is unable to detect attacks across the entire network
E. It must support multiple operating systems.
【多选题】
What are two default be haviors of the traffic on a zone-based firewall?___
A. Traffic within the self -zone uses an im plicit deny all.
B. All traffic between zones is implicitly blocked
C. Communication is allowed between interfadAss that are members of the same zone
D. Communication is blocked between interfaces that are members of the same zone
E. The CBAC rules that are configured on router interfaces apply to zone interfaces
【多选题】
Which two advantages does the on-premise model for MDM deployment have over the cloud-based model?___
A. The on-premise model is easier and faster to de ploy than the cloud-based model
B. The on-premise model is more scalable than the cloud-based model
C. The on-premise model is generally less expensive than the cloud-based model
D. The on-premise model generally has less latency than the cloud- based model.
E. The on-premise model provides more control of the MDM solution than the cloud
【多选题】
Which two actions can an end usts take to manage a lost or stolen device in Cisco ISE? ___
A. Activate Cisco ISE End point Protection Services to quarantine the device.
B. Add the mac address of the device to a list of blacklisted devices
C. Force the device to be locked with a PIN
D. Request revocation of the digital certificate of the device.
E. Reinstate a device that the user previously marked as lost or stolen
【多选题】
Which two problems can arise when a proxy firewall serves as the gateway between networks?___
A. It can prevent content caching
B. It can limit application support
C. It is unable to prevent direct connections to other networks
D. It can cause reduced throughput.
E. It is unable to provide antivirus protection
【多选题】
When using the Adaptive Security Device Manager(ASDM), which two methods are available to add a new root certificate?___
A. Use sCep
B. Install from SFTP server
C. Install from a file
D. Use Https
E. Use LDAP
【多选题】
Which two are considered basic security principles?___
A. Accountability
B. Redundancy
C. High Availabilit
D. Integrity
E. Confidentiality
【多选题】
Which two roles of the Cisco WSA are true?___
A. IPS
B. firewall
C. antispam
D. web proxy
E. URL filter
【单选题】
Which next-generation encryption algorithm supports four variants?___
A. SHA-2
B. SHA-1
C. MD5
D. HMAC
【单选题】
What aims to remove the abil ity to deny an action?___
A. Non-Repudiation
B. Accountability
C. Integrity
D. Deniability
【单选题】
Which statements about the native VLAN is true ?___
A. It is susceptible to VLAN hopping attacks.
B. It is the Cisco recommended VLAN for switch-management traffic
C. It is most secure when it is a ssigned to vLAn 1.
D. It is the cisco-recomme nded vlan for user traffic
【单选题】
There are two versions of IKE:IKEv1 and IKEv2. Both IKEv1 and IKEv2 protocols operate in phases IKEv1 operates in two phases. IKEv2 operates in how many phases?___
A. 2
B. 3
C. 4
D. 5
【单选题】
What does the dh group refer to?___
A. length of key for hashing C
B. length of key for encryption
C. tunnel lifetime key
D. length of key for key exchange
E. length of key for authentication
【单选题】
Which path do you follow to enable aaa through the SDM ?___
A. Configure Tasks > AAA
B. Configure > Addition Authentication > AAA
C. Configure > AAA
D. Configure > Additional Tasks > AAA
E. Configure Authentication > AAA
【单选题】
which technology cloud be used on top of an MPLS VPN to add confidentiality ?___
A. IPsec
B. 3DES
C. AES
D. SSL
【单选题】
Which term is most closely aligned with the basic purpose of a SIEM solution? ___
A. Non-Repudiation
B. Accountability
C. Causality
D. Repudiation
【单选题】
You have just deployed SNMPv3 in your environment, Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request?___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port?___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch?___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature, what is the effect on the parent signature and the family of subsignatures?___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected, the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks?___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device?___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection?___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
推荐试题
【单选题】
液压元件中液压泵,液压马达与电动机,工作机构间的同轴度偏差应___0.1mm
A. 小于
B. 小于或等于
C. 大于
D. 大于或等于
【单选题】
下列有关大型工件划线时的安全事项说法错误的是___。
A. 所有的紫色酒精,在1米内不准点有明火,不准放在暖气片上
B. 工作台要牢固平稳,平台周围要保持整洁,通行要方便,1米内禁止堆放物件
C. 使用的大工具如弯尺、划线盘、角铁应有指定的地点妥善存放,以免砸伤人
D. 地面上的物体放置要整齐平稳,防止倾斜伤人
【单选题】
多段拼接的床身接合面有渗油、漏油或用___厚度的塞尺能塞入时,就应对接合面进行修整刮削。
A. 0.01mm
B. 0.04mm
C. 0.10mm
D. 0.20mm
【单选题】
TR-2050复合膜外观似普通塑料薄膜,软化点110℃热熔复合温度190-210℃,专门用于不锈钢或刚与镀锌板、冷轧板、铝板等之间的流水线双金属复合,实现高强度的金属粘接,粘接后的金属可以满足侧弯或___等后期加工要求。
A. 锻压
B. 电焊
C. 机械裁剪冲孔
D. 机械切削
【单选题】
下列有关我国经济合同说法错误的是___。
A. 经济合同是法人之间为实现一定经济目的,明确相互权利义务关系的协议
B. 订立经济合同,必须遵守国家的法律,必须符合国家政策和计划的要求
C. 给付定金的一方不履行合同的,无权请求返还定金。接受定金的一方不履行合同的,应当返还定金
D. 订立经济合同,必须贯彻平等互利、协商一致、等价有偿的原则
【单选题】
当皮肤角质外层破坏时,人体电阻大约为___Ω。
A. 500~800
B. 800~1000
C. 1000~1500
D. 1500~2000
【单选题】
下列选项中,铣床安全检查的内容不正确的是___。
A. 检查转盘和手柄应操纵灵活,档位分明
B. 检查工作台纵向、横向及垂直方向的进给运动应互锁,应保证三个方向进给运动的传动离合器要同时接通
C. 检查是否有冷却液防护装置
D. 检查装夹工件、工具是否牢固可靠
【单选题】
内孔为圆锥形的联轴器,用加热法使圆锥孔胀大,但套装在锥形轴头上时,应比冷态时___套进一段轴向尺寸。
A. 多
B. 少
C. 多或少
D. 无法估计
【单选题】
下列有关光学平直仪说法错误的是___。
A. 光学平直仪是由平直仪本体和反射镜组成
B. 光学平直仪是一种精密光学测量仪器
C. 光学平直仪可以同时测出工件水平方向和水平垂直的方向的直线性
D. 光学平直仪不能测出滑板运动的直线性
【单选题】
变量录能实现流量的调节,其主要原因是因为___。
A. 密封容积的存在
B. 密封容积的变化
C. 电机转速的变化
D. 密封容积的变化量可调
【单选题】
由于静压轴承节流器间隙被杂物堵塞,流油不畅造成轴承油腔压力不稳定可通过___方法解决。
A. 清洗节流器
B. 清洗滤油器
C. 更换轴承
D. 调整膜片间隙
【单选题】
在床身纵向导轨的专用检具上放自准直仪的反射镜,光管放在床身的外面,___转至测量垂直平面直线度的 A处,移动检具,每隔检具长度记录一次读数,并画出导轨的误差曲线。
A. 光管
B. 观察镜
C. 读数头
D. 反射镜
【单选题】
___是由链条和具有特殊齿形的链轮组成的传递运动和动力的传动。
A. 齿轮传动
B. 链传动
C. 螺旋传动
D. 带传动
【单选题】
液压系统回油站中背压___时,将会产生液压系统的振动而影响加工工件的精度。
A. 很小
B. 很大
C. 适当
D. 无法确定
【单选题】
利用火焰、电弧等热源、将金属或非金属材料加热到熔融状态,在高速气流的推动下,呈雾状___到工件表面上的过程称为金属喷涂。
A. 洒落
B. 散落
C. 喷落
D. 喷射
【单选题】
M1432A 型磨床工作台换向时,先导阀已改变方向,但换向阀不动作,因而工作台不换向,其原因是___。
A. 停留阀节流口太大
B. 主油路压力低
C. 辅助油路压力低
D. 泵的压力高
【单选题】
两孔轴线相交成90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,以下___是不正确的工艺。
A. 用万能角度尺和心轴检测两孔轴线角度是否合格
B. 用宽座角尺、心轴和塞尺检测两孔轴线角度是否合格
C. 用百分表和心轴检测两孔轴线角度是否合格
D. 用千分尺和心轴检测两孔轴线角度是否合格
【单选题】
深孔,是指孔的深度和直径的比值___的孔。
A. 等于5
B. 等于4
C. 大于5小于20
D. 大于20
【单选题】
高速旋转机械的启动试运转,通常不能突然加速,也不能在短时间内升速至___。
A. 最低转速
B. 最高转速
C. 额定工作转速
D. 最低或最高转速
【单选题】
在轴颈上钻孔时,先将定心工具夹持在钻床主轴上找正V型铁的中心并固定,然后把轴卧放在V型铁中,用___按工件端面中心线找正并固定,最后移动钻头就可以钻孔了。
A. 宽座角尺
B. 钢板直尺
C. 刀口尺
D. 水平仪
【单选题】
班组的费用核算主要是指更换配件,材料,改造未预见的更换件,配件和材料。这些费用若计算在承包费或额定工时内,则要从___的原则出发,既在保证周期,保证质量的前提下,尽可能少换多修,多代少领。
A. 节约材料
B. 节约能源
C. 节约费用
D. 节约成本
【单选题】
在板牙套入工件2~3牙后,应及时从___方向用90°角尺进行检查,并不断校正至要求。
A. 前后
B. 左右
C. 前后、左右
D. 上下、左右
【单选题】
机床主轴轴承特别是现代数控机床主轴轴承绝大部分采用了___润滑。
A. 润滑油 
B. 柴油
C. 润滑脂 
D. 机油
【单选题】
用薄板钻钻削工件时,___,起定心和箝制作用。
A. 钻心尖先切入工件
B. 钻外尖先切入工件
C. 钻心尖和钻外尖同时切入工件
D. 有时钻心尖先切入工件,有时钻外尖先切入工件
【单选题】
一些特种机床的精密丝杠常选用38CrMoAlA材料制造,其热处理工艺是调质H B280,渗氮HV850,调质后基体组织必须是均匀的___,渗氮前表面应无脱碳层。
A. 索氏体
B. 贝氏体
C. 马氏体
D. 奥氏体
【单选题】
要将齿轮断裂的齿轮修复如断,则以下修复工艺原则中,哪个是不正确有修复原则___
A. 修复工艺要考虑新齿模数与原齿轮必须一样
B. 修复工艺要考虑新齿材料与原齿轮必须一样
C. 新齿齿廓的硬度必须大于原齿廓
D. 新齿齿廓的硬度必须等于原齿廓
【单选题】
采用定向装配的方法装配滚动轴承时,在装配前需对主轴轴端锥孔中心线偏差及___进行测量,确定误差方向并作好标记。
A. 轴承内、外圈径向跳动误差
B. 轴承内孔与外圈的同心度误差
C. 轴承外圈尺寸误差
D. 轴承内孔尺寸误差
【单选题】
班组的经济核算无论是项目承包或单台总工时的考核,还是按计划,经济地完成任务,都需要以降低成本,提高质量,缩短修理周期为班组的___,这也是班组经济换算的关键。
A. 生产要求
B. 工作要求
C. 生产目标
D. 工作目标
【单选题】
经纬仪在机械装配和修理中,主要是用来检测精密机床的___和万能转台的分度误差。
A. 水平转台
B. 垂直转台
C. 水平导轨
D. 垂直导轨
【单选题】
下列对管道工安全操作规程表述不正确的是___。
A. 绞管牙时,人应站在绞柄前面,锯割管子在快要割断时不要用力要猛,以使其快速断开
B. 不允许一人单独在沟、井及容器内作业,必须有二人以上,其中一人在外面负责.监护
C. 在沟、井、容器内工作的人员,如发现有异味或感到头晕、恶心等,应即停止工作到外面休息,待处理后再进入工作,有条件的地方应搞好通风
D. 在有压力的管道上抢修时,,应先进行减压,正在运行的管道(汽、水)原则上不允许进行检修工作
【单选题】
在数控机床的试运行中,除了___引起的故障外,则不允许机床有故障出现,否则表明机床的安装调试有问题。
A. 软件
B. 硬件
C. 机床运动特性
D. 操作失误
【单选题】
合理调整轴承间隙,是保证轴承寿命,提高轴的___的关键。
A. 旋转速度
B. 旋转精度
C. 尺寸精度
D. 表面粗糙度
【单选题】
滚齿机检测时外支架置于工作行程上端,检验棒安放在工作台上,固定指示器,使其测头分别在 A、 B位置垂直接触及相距L2处的检验棒表面,移动外支架,顶紧检验棒检验,将工作台回转___,再检验一次。
A. 90°
B. 150°
C. 100°
D. 180°
【单选题】
喷吸钻是一种新型的内排屑深孔钻,主要用于加工直径___的深孔。
A. 直径为18~180mm,深径比在100mm以内
B. 直径为10~80mm,深径比在50mm以内
C. 直径为10~100mm,深径比在150mm以内
D. 直径为10~150mm,深径比在100mm以内
【单选题】
以下工件的毛坯生产过程中,哪些最适合锻镦粗___
A. 单个圆盘形齿轮
B. 双联圆盘形齿轮
C. 法兰盘
D. 圆柱光短轴
【单选题】
一些特种机床的精密丝杠常选用38CrMoAlA材料制造,其热处理工艺是调质H B280,渗氮HV850,调质后基体组织必须是均匀的___,渗氮前表面应无脱碳层。
A. 索氏体
B. 贝氏体
C. 马氏体
D. 奥氏体
【判断题】
读装配图,首相应了解各零件的连接形式及装配关系
A. 对
B. 错
【判断题】
全跳动和圆跳动是表示工件的形状公差
A. 对
B. 错
【判断题】
用来表达机件的倾斜部分结构形状的视图称为旋转试图
A. 对
B. 错
【判断题】
球面可展开成曲面,能准确地画出展开图
A. 对
B. 错