【判断题】
工作台要牢固平稳,平台周围要保持整洁,通行要方便,1米内禁止堆放物件
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
两孔轴线相交成 90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,应该先钻穿直径大的孔
A. 对
B. 错
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
A. 对
B. 错
【判断题】
经纬仪整平时,经反复调整,直到仪器转到任意位置时,水准气泡最大偏离值小于二分之一格为止
A. 对
B. 错
【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
推荐试题
【多选题】
以下不是区间疏散乘客前车站工作人员的准备工作内容___
A. 按压紧急停车按钮,开启事故照明及工作照明
B. 监视限制客流
C. 发布延误信息,必要时疏散站内乘客并保管好钱票
D. 开启隧道通风
E. 接应120医护人员及110公安人员,安排人员进入区间,安排人员接应乘客。
【多选题】
以下是区间疏散乘客完毕的完善工作内容___
A. 驾驶员疏散完毕关好紧急疏散门,报告行车调度员。现场安全时留在列车上,现场不安全时撤离。
B. 车站人员设好防护,巡查轨道,确定畅通后报告行车调度员
C. 发布延误信息,必要时疏散站内乘客并保管好钱票
D. 行车调度员得到线路出清报告后,通知电力调度员恢复供电,指示驾驶员驶往前站。得到驾驶员报告线路畅通后恢复正常运营。
【多选题】
下列属于列车发生火灾驾驶员通报的内容的是___
A. 乘客火灾报警时,立即报告行车调度员。
B. 立即报告值班调度主任、全体当班调度员,同时致电110、 119 和 120。
C. 列车发出火灾报警信息时,确认发生火灾后,再报告行车调度员。
D. 通知相关车站、车辆段和各抢险救援队,向全线车站和列车发布信息,向列车正前往的车站或列车停留的车站通报火灾详情,要求车站做好疏散和灭火准备。
【多选题】
下列属于列车发生火灾时,列车运行往前方站的处理办法的是___
A. 列车到站停稳后打开列车门和屏蔽门,无法打开时手动开门,协助有困难乘客,简易救治受伤乘客。
B. 做好自身防护后检查确认无滞留乘客并尝试灭火,不能保证自身安全时等候救援。
C. 启动站台火灾排烟模式。
D. 乘客疏散完毕且供电臂内所有列车出清后,电力调度员立即停止供电。
【多选题】
下列属于列车发生火灾时,列车在区间停车的处理办法的是___
A. 驾驶员与行调确定疏散方向,广播组织乘客疏散,打开所有车门,提醒乘客不要靠近车门
B. 车站工作人员做好个人防护,携带备品,进隧道引导乘客
C. 环控调度员开启隧道事故照明,根据具体情况开启相应隧道排烟模式,监控设备运转
D. 机电人员根据需要切断相应设备电源。
E. 值班调度主任下令疏散,确定路线,视情况召集救援人员,必要时启动公交接驳,监控客流,制定调整方案
【多选题】
下列属于列车冒进信号未压上道岔时的处理的是___
A. 确认具体情况,报告行调,行调指示列车不得再行移动,后方站扣车,指示退行
B. 行调指示列车不得再行移动,后方站扣车,指示退行
C. 安抚乘客,到站停妥开门乘降
D. 维持候车秩序
E. 确认具体情况,锁闭道岔,报告行调
【多选题】
车站的现金由___组成。
A. 车站的票款收入
B. 现金
C. 车站日常票务运作备用金
D. 纸币、硬币
【多选题】
以下触电防护技术中,属于间接触电防护技术的是___
A. 保护接地
B. 保护接零
C. 绝缘
D. 屏护
【多选题】
从危害角度分类,雷电可分为___
A. 直击雷
B. 感应雷
C. 雷电波入侵
D. 球雷
【多选题】
雷电可能引起的危害有___
A. 火灾和爆炸
B. 触电
C. 设备和设施毁坏
D. 大面积停电
【多选题】
以下消除机械伤害的措施中,属于实现机械本质安全的措施为___
A. 消除产生危险的原因
B. 使人们难以接近机器的危险部位
C. 通过培训,提高人们避免伤害的能力
D. 通过培训,提高人们辨别危险的能力
【多选题】
保证用电安全的基础要素有___
A. 电气绝缘
B. 安全距离
C. 安全载流量
D. 标志
【多选题】
静电可能引起的危害有___
A. 火灾和爆炸
B. 静电电击
C. 电子设备损坏
D. 大面积停电
【多选题】
射频电磁场可能引起的危害有___
A. 引爆器件
B. 灼伤皮肤
C. 引起眼睛损伤
D. 造成植物神经紊乱
【多选题】
电气系统故障可能引起的危害有___
A. 火灾和爆炸
B. 异常带电
C. 造成植物神经紊乱
D. 异常停电
【多选题】
根据电能的不同作用形式,可将电气事故分为___。
A. 触电事故
B. 静电危害事故
C. 雷电灾害事故
D. 电磁场危害
E. 电气系统故障危害事故
【多选题】
触电事故分为___。
A. 电击
B. 直接触电
C. 电伤
D. 间接触电
【多选题】
车间对机器进行安全布局时要考虑哪些因素___。
A. 空间
B. 照明
C. 管、线布置
D. 维护时的出入安全
【多选题】
加装安全防护装置应考虑的因素有___。
A. 强度、刚度、稳定性和耐久性
B. 对机器比较危险的部位要完全密封起来
C. 对其他危险的控制,如选择特殊材料来控制噪声的强度
D. 对机器可靠性的影响
【多选题】
机械安全防护装置的一般要求有___。
A. 结构简单、布局合理,不得有锐利的边缘和突缘
B. 有足够的可靠性
C. 设置自身出现故障的报警装置
D. 紧急停车开关应保证瞬时动作时能终止设备的一切运动
【多选题】
下列属于列车故障常用的改进措施有___。
A. 加强员工设备安全意识教育,加强对所有零部件的检查
B. 对老化车辆进行更换,用以提高车辆的安全性、可靠性、稳定性,降低车辆的故障率
C. 车辆零部件牢固、无松动、无裂纹,部分需闭合的设备锁闭功能良好
D. 加装安全监控设备,提高车辆自动化水平
【多选题】
雷电的破坏作用有___
A. 直击雷放电、二次放电、雷电流的热量会引起火灾和爆炸
B. 雷电的直接击中、跨步电压的作用会造成人员的伤亡
C. 对其他危险的控制,如选择特殊材料来控制噪声的强度
D. 强大的雷电流、高压电可导致电气设备击穿或烧毁
【多选题】
为了有效防止触电事故,可采取___等技术或措施。
A. 绝缘
B. 屏护
C. 安全间距
D. 保护接地或接零
E. 漏电保护
F. 电荷的泄放消散
【多选题】
接闪器的基本形式有___。
A. 避雷针
B. 避雷带
C. 避雷网
D. 笼网
【多选题】
消除静电危害的基本对策有___。
A. 从改进工艺着手尽量少产生静电
B. 利用屏蔽的方法减少静电积累
C. 利用泄露导走的方法迅速排除静电
D. 改变生产环境,减少易燃易爆物的泄放
【多选题】
地铁发生火灾时,通信系统容易瘫痪,主要由于___对通信器材的影响。
A. 浓烟
B. 水流
C. 停电
D. 高温
【多选题】
地铁发生火灾时救援难度大主要因为___。
A. 地下空间较大,救援人数有限
B. 浓烟使得救援人员无法准确确定起火点
C. 救援人员无法长时间在地下进行救援工作
D. 地下空间相对封闭,给救援人员开展救援战术配合造成困难
【多选题】
地铁发生火灾时,疏散困难主要因为___。
A. 产生的高温热气浪使得人员难以逃离
B. 浓烟使得应急照明系统的效果大打折扣
C. 产生的浓烟对人的眼睛、喉咙、气管有刺激,影响人员疏散
D. 烟气与新鲜空气在出入口冲撞,使得车站内没有充足的新鲜空气补充
【多选题】
引发城市轨道交通火灾的主要原因有___。
A. 列车材料
B. 管理方面
C. 人的行为
D. 环境
【多选题】
火灾按着火可燃物类别可分为___。
A. 固体可燃物火灾
B. 电气火灾
C. 可燃气体火灾
D. 金属火灾
E. 可燃气体火灾
【多选题】
消火栓由___组成。
A. 消防软管卷盘
B. 水带
C. 喷射软管
D. 水枪
【多选题】
火灾自动报警设备由___组成。
A. 灭火装置
B. 区域报警器
C. 自动报警器
D. 火灾探测器
【多选题】
发生火灾时,要掌握哪些逃生本领___。
A. 镇定情绪,时刻保持清醒头脑
B. 防烟熏
C. 楼房底层着火,住上层的人自然只能从楼梯跑
D. 用绳或用撕开的被单连接起来,将其固定在物体上,使人向楼下逃至无火的楼层或地面
E. 如果楼梯被大火封住,应立即跑到屋顶通过另一单元的楼梯出来,也可从阳台抱住水管或利用竹竿下滑逃生
【多选题】
下列根据电能的不同作用形式属于电气事故的分类的是___。
A. 电气系统故障危害事故
B. 电磁场危害
C. 雷电灾害事故
D. 电击
【多选题】
以下属于用电安全的基础要素的是___。
A. 电气绝缘
B. 安全距离
C. 电流
D. 标志
【多选题】
电气绝缘的性能是否良好,可通过测量哪些参数来衡量?___
A. 绝缘电阻
B. 泄漏电流
C. 耐压强度
D. 电阻
【多选题】
以下属于保持安全距离的是___
A. 带电体与地面之间
B. 带电体与带电体之间
C. 带电体与人体之间
D. 带电体与其他设施和设备之间
【多选题】
易产生过电压的电力系统应该装有哪些电压保护装置?___
A. 避雷针
B. 避雷器
C. 避雷管
D. 保护间隙
【多选题】
以下属于触电事故的类型的是___
A. 电击
B. 两相触电
C. 电伤
D. 单相触电
【多选题】
以下属于电击事故的___
A. 单相触电
B. 两相触电
C. 电伤
D. 跨步电压触电