【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
推荐试题
【单选题】
(71042)《铁路客车运用维修规程》(铁运〔2006〕27号)自( )起施行。(1.0分)___
A. 2006年4月1日
B. 2006年5月1日
C. 2006年6月1日
D. 2006年7月1日
【单选题】
(71043)通电直导线周围磁场的方向,通常采用( )进行判定。(1.0分)___
A. 左手螺旋定则
B. 右手螺旋定则
C. 顺时针定则
D. 逆时针定则
【单选题】
(71044)25T客车逆变器箱主电路为三相桥式电压型电路,采用( )作为开关器件,具有开关频率高、驱动简单、损耗低的特点。(1.0分)___
A. IGBT
B. 二极管
C. 三极管
D. 晶闸管
【单选题】
(71045)客货共线运行速度160 km/h<v≤200 km/h铁路,区间双线线间最小距离为( )。(1.0分)___
A. 4 000 mm
B. 4 200 mm
C. 4 400 mm
D. 4 600 mm
【单选题】
(71046)正常情况下,逆变器、充电器带电电路对地绝缘电阻须大于( )。(1.0分)___
A. 5 M
B. 10 M
C. 20 M
D. 15 M
【单选题】
(71047)25T客车逆变器输入欠压保护:当输入电源电压降到( )时,逆变器停止工作。(1.0分)___
A. DC 500 V
B. DC 580 V
C. DC 560 V
D. DC 590 V
【单选题】
(71048)磁场、电流和电磁力三者间的关系可用( )来判定。(1.0分)___
A. 左手定则
B. 右手定则
C. 顺时针定则
D. 逆时针定则
【单选题】
(71049)铁路行车安全监测设备是保障铁路运输安全的重要技术设备,应具备监测、记录、报警、存取功能,保持其作用良好、准确可靠,并定期进行( )。(1.0分)___
A. 维修
B. 计量校准
C. 检查
D. 更换
【单选题】
(71050)对于两根平行电线来说,电流越大导线越长,距离越近则( )就越大。(1.0分)___
A. 磁感应强度
B. 磁场强度
C. 磁电势
D. 电磁力
【单选题】
(71051)25T客车空调逆变电源连续运行试验:车辆加全载,逆变器工作1 h,逆变器工作状态须正常,功率器件的散热表面温升不大于( )。(1.0分)___
A. 50 K
B. 40 K
C. 60 K
D. 70 K
【单选题】
(71052)列车调度电话系统准许( )根据需要在区间临时加入通话。(1.0分)___
A. 列检值班员
B. 代值乘运转车长的车辆乘务员
C. 车辆乘务员
D. 其他人员
【单选题】
(71053)BSP青藏车KC20DQ连接器的额定电流是( )。(1.0分)___
A. 670 A
B. 130 A
C. 250 A
D. 400 A
【单选题】
(71054)通过线圈中电磁感应现象可知,线圈中磁通变化越快,感应电动势( )。(1.0分)___
A. 越小
B. 不变
C. 越大
D. 不能确定
【单选题】
(71055)在干线及繁忙干线上,须设配智能跟踪装置的红外线轴温探测网,轴温探测站的间距一般按( )设置。(1.0分)___
A. 20 km
B. 30 km
C. 40 km
D. 50 km
【单选题】
(71056)25T型客车A1级修程即( )。(1.0分)___
A. 安全检修
B. 40万km段修
C. 80万km段修
D. 大修
【单选题】
(71057)多股铝导线的焊接,可采用( )(1.0分)___
A. 钎焊
B. 气焊
C. 电弧焊
D. 埋弧焊
【单选题】
(71058)救援列车、救援列车人员的出动均由铁路局调度所机车调度员发布事故救援出动的调度命令,列车调度员组织并确保救援列车在( )内开行。(1.0分)___
A. 15 min
B. 20 min
C. 25 min
D. 30 min
【单选题】
(71059)25G型空调客车空调机组主电路由( )供电。(1.0分)___
A. 三相交流380 V
B. 单相交流220 V
C. 直流110 V
D. 直流48 V
【单选题】
(71060)电工有硅钢片分为热轧和冷轧两种,硅钢片的主要特性是( )(1.0分)___
A. 磁导率高
B. 磁导率低
C. 电阻大
D. 电阻小
【单选题】
(71061)最高运行速度超过120 km/h客车的轮对装车前,应进行( )。(1.0分)___
A. 动平衡试验
B. 跑合试验
C. 外观检查
D. 制动盘制动试验
【单选题】
(71062)25G型空调客车空调机组控制电路由( )供电。(1.0分)___
A. 三相交流380 V
B. 直流110 V
C. 单相交流220 V
D. 直流48 V
【单选题】
(71063)使用计算机、传真机、无线传送系统发布调度命令时,命令接受人员确认无误后应( )。(1.0分)___
A. 汇报领导
B. 通知相关人员
C. 等待下个命令
D. 及时反馈回执
【单选题】
(71064)在交流电路中,电感线圈中的电流总是滞后于电压( )。(1.0分)___
A. 60°
B. 90°
C. 180°
D. 270°
【单选题】
(71065)25G型空调客车各种照明、吸尘器、温水加热等由( )供电。(1.0分)___
A. 三相交流380 V
B. 直流110 V
C. 单相交流220 V
D. 直流48 V
【单选题】
(71066)旅客列车中乘坐旅客的车辆,与机车、货车相连接的客车端门及编挂在列车尾部的客车后端门须( )(1.0分)___
A. 打开
B. 加锁
C. 拆除
D. 随意开关
【单选题】
(71067)( )是有功功率P和视在功率S的比值。(1.0分)___
A. tan
B. cot
C. sin
D. cos
【单选题】
(71068)车辆轮对的内侧距离为( ),其允许偏差为±3 mm。(1.0分)___
A. 1 343 mm
B. 1 353 mm
C. 1 363 mm
D. 1 373 mm
【单选题】
(71069)25型空调客车应急照明、轴温报警器、尾灯、厕所无人显示等均由( )供电。(1.0分)___
A. 三相交流380 V
B. 直流48 V
C. 单相交流220 V
D. 直流110 V
【单选题】
(71070)车辆发生故障,距离接触网带电部分不足( )时,必须待接触网停电并接地后,方可进行处理。(1.0分)___
A. 1 m
B. 1.5 m
C. 2 m
D. 2.5 m
【单选题】
(71071)25型空调客车全车用电设备均有良好的( )保护安全措施。(1.0分)___
A. 欠压
B. 缺相
C. 接零
D. 接地
【单选题】
(71072)三相对称电动势在相位上互差( )。(1.0分)___
A. 90°
B. 120°
C. 150°
D. 180°
【单选题】
(71073)较大事故的调查期限为( )。(1.0分)___
A. 10天
B. 20天
C. 30天
D. 60天
【单选题】
(71074)某车间220 V照明电路,用电器额定功率总计3.2 kW,应选用( )的熔断器装入总保险盒中。(1.0分)___
A. 额定电流为15 A
B. 熔断电流为15 A
C. 额定电流为12 A
D. 熔断电流为12 A
【单选题】
(71075)铁路运输企业对每名铁路旅客人身伤亡的赔偿责任限额为人民币( )。(1.0分)___
A. 5万元
B. 10万元
C. 15万元
D. 20万元
【单选题】
(71076)三相异步电动机的三个接线端的首端与电源三根火线连接,三个尾端连接成一点,称为( )。(1.0分)___
A. 单相连接
B. 三角形连接
C. 星形连接
D. 三相连接
【单选题】
(71077)车辆上零部件如车轴、车轮、转向架、车电分线盒以及其他零部件的位置称呼法,是由( )。(1.0分)___
A. 一位端顺次数到二位端
B. 二位端顺次数到一位端
C. 任意称呼
D. 未统一规定
【单选题】
(71078)造成( )为特别重大事故。(1.0分)___
A. 30人以上死亡
B. 10人以上30人以下死亡
C. 3人以上10人以下死亡
D. 3人死亡
【单选题】
(71079)车辆上零部件如左右对称,其称呼法为:站在一位车端,面向二位端,( )顺序数到二位车端。(1.0分)___
A. 从左向右
B. 从右向左
C. 从前向后
D. 从后向前
【单选题】
(71080)造成( )为重大事故。(1.0分)___
A. 1亿元以上的直接经济损失
B. 5 000万以上1亿元以下的直接经济损失
C. 1 000万元以上5 000万以下的直接经济损失
D. 500万元以上1 000万以下的直接经济损失
【单选题】
(71081)车辆上零部件如果左右不对称,其称呼法按( )方法顺次数。(1.0分)___
A. 左右不对称
B. 左右对称
C. 从前向后
D. 从后向前