【多选题】
An administrator is deploying multiple Windows 2003 Virtual Machines from the same template. What two steps should be taken to avoid network conflicts? (Choose two.)___
A. Customize the guest operating system.
B. Install VMware Tools into the new virtual machines.
C. Copy the Microsoft Sysprep tools onto the vCenter Server system.
D. Ensure the e1000 vmnic is selected for each new virtual machine.
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
AC
解析
暂无解析
相关试题
【多选题】
Which three conditions would prevent Storage I/O Control from being enabled on a group of datastores? (Choose three.)___
A. The datastores planned for the solution are used by different vSphere clusters.
B. A datastore planned for the solution is configured as a Raw Device Mapping file.
C. A datastore planned for the solution has three extents.
D. A datastore planned for the solution is configured as NFS.
E. The organization has an Enterprise license.
【多选题】
Which two actions are prerequisites to adding ESXi 6.x hosts to a vSphere Distributed Switch? (Choose two.)___
A. Verify that there is at least one Distributed Port Group on the Distributed Switch.
B. Verify that the Distributed Port Group have active uplinks configured in its teaming and failover policy.
C. Verify that the
D. istributed Switch has been configured with a Network Profile.
【多选题】
An organization has configured Distributed Power Management (DPM) on a vSphere 6 cluster. The organization wants to be alerted when an ESXi host has been powered down by DPM. Which two options represent the type and name of the alarm that would accomplish this? (Choose two.)___
A. DrsEnteringStandbyModeEvent
B. DrsEnteredStandbyModeEvent
C. Event-based
D. Condition-based
【多选题】
Which two allow for the disabling of Network Rollback operations? (Choose two.)___
A. Modifying the vpxd advanded configuration options and adding the config.vpxd.network.rollback key
B. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the<rollback> xml tag
C. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the <networkrollback> xml tag
D. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\firstboot\vpxd-service- spec.prop file and adjusting the <rollback> xml tag
【多选题】
An administrator is tasked with performing a vMotion migration of a virtual machine. The virtual machine is configured as follows: <vSphere Flash Read Cache (vFRC) enabled> <Is part of a Distributed Resource Cluster (DRS) Cluster> Which two statements are true? (Choose two.)___
A. Each ESXi host in the cluster supports multiple virtual flash resources.
B. Each ESXi host in the cluster supports one virtual flash resource.
C. DRS treats powered-on virtual machines with Flash Read Cache as having a preferred affinity to their current host and moves them only for mandatory reasons.
D. DRS treats powered-on virtual machines with Flash Read Cache as having a required affinity to their current host and does not move them.
【多选题】
An administrator is using the Host Failures to Tolerate Admission Control Policy for a vSphere High Availability ___ cluster. When configuring this setting on the cluster, the administrator sees this error message: <Insufficient resources to satisfy HA failover level on cluster > What are two likely causes for the error? (Choose two.)(AB)
A. The hosts in the cluster are disconnected.
B. A host in the cluster is displaying an HA error.
C.
D. istributed Resource Scheduler has not been configured on the cluster.
【多选题】
What are two ways to identify TCP/IP stack information? (Choose two.)___
A. Using the vSphere Web Client
B. Using esxcli network ip netstack
C. Using esxcfg-netstack
D. Using the vSphere Client
【多选题】
Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)___
A. A value in the Virtual Flash Read Cache text box must be entered.
B. A Flash Resource Pool for Cache size reservation must be entered.
C. The Device backing and the block size must be configured.
D. The
E. nable virtual flash host swap cache check box must be selected.
【多选题】
What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two.)___
A. Networks
B. Applications
C. Storage
D. Management
【多选题】
When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials. What two options are probable causes of the authentication failure? (Choose two.)___
A. The vSphere credentials have not been granted permissions.
B. The vSphere credentials are granted read-only permissions.
C. The vSphere credentials are granted no-access permissions.
D. The vSphere credentials are not a member of the local administrator group.
【多选题】
An administrator is performing a scripted installation of ESXi 6.x. In which three locations does the script need to be? (Choose three.)___
A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore
【多选题】
In order for a company to meet regulatory requirements, all ESXi 6.x Hosts must be configured to direct logs to a syslog server. What are two ways ESXi hosts can configured for this action? (Choose two)___
A. Use the esxcli system syslog command.
B. Edit them in the ESXi host Advanced System Settings.
C. From the Syslog collector user interface of the Web Client.
D. Syslog logging is not available for
E. SXi Hosts.
【多选题】
Which three actions can be executed when an alarm is triggered? (Choose three.)___
A. Send an email.
B. Send an SNMP trap.
C. Run a script or command.
D. Run an Orchestrator workflow.
E. Send a trigger to syslog.
【多选题】
An administrator is attempting to power on a virtual machine, but is unable to do so. Which two reasons are probable causes of the failure? (Choose two.)___
A. Storage access to the virtual machine swap file has been lost.
B. One of the virtual machine VMDK files is locked.
C. Virtual machine is running CentOS 7.0 64-bit.
D. Virtual machine has Hyper-Threading enabled.
【多选题】
An administrator has configured a host profile so that ESXi 6.x hosts will point to the corporate NTP server for time synchronization. The NTP server is located at 10.0.30.213, but time has not been synchronized properly across the ESXi hosts. The administrator reviews Host Profile settings as shown in the Exhibit. Which two steps are required to resolve the issue? (Choose two.)___
A. Correct the NTP server IP address.
B. Check the host for host profile compliance.
C. Remediate the host based on the updated host profile.
D. Change the NTP server to the FQDN as IP Addresses are not supported.
【多选题】
An administrator is attempting to migrate a large Hadoop virtual machine using vMotion. The administrator notices a delay when the machine is quiesced. The Hadoop virtual machine is processing many transactions a second to an in-memory database. Which two actions would help reduce the amount of time needed to perform a vMotion on this virtual machine? (Choose two.)___
A. Use multiple NICs for the vMotion vmkernel port.
B. Use a 10Gbps Network card for the vMotion vmkernel port.
C. Add an additional management network to help transmit the data quicker.
D. Disable Fault Tolerance before performing the vMotion.
【多选题】
An administrator is installing a new network card in an ESXi 6.x host that is part of a vSphere cluster. When the host is placed into maintenance mode, the vSphere Web Client displays the progress bar at 2% for over 30 minutes. Which two are likely reasons for this occurrence? (Choose two.)___
A. Maintenance mode is unable to migrate all virtual machines from the host.
B. There is a large number of virtual machines that must be migrated from the host.
C. VMware High Availability is in the process of reconfiguring the cluster.
D. Each virtual machine on the
E. SXi host must be reconfigured to recognize the new adapter.
【多选题】
Which two events happen when Distributed Resource Scheduler (DRS) is disabled? (Choose two.)___
A. The cluster's resource pool heirarchy and affinity rules are re-established when DRS is turned back on.
B. The cluster's resource pool hierarchy and affinity rules are not re-established when DRS is turned back on.
C. The cluster's resource pools are removed from the cluster.
D. The cluster's resource pools are removed from the cluster and assigned to the hosts.
【多选题】
Which two networking connection types can be configured on a virtual switch? (Choose two.)___
A. Virtual machine portgroups
B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network
C. Web services over the Management Network
D. NFS and FCoE storage services
【多选题】
An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails. What are two reasons that the host failed to enter maintenance mode? (Choose two.)___
A. The DRS cluster Automation Level is set to Partially Automated mode.
B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group.
C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group.
D. One of the virtual machines on the
E. SXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated.
【多选题】
When modifying a vApp, which two vSphere entities can be added? (Choose two.)___
A. A resource pool
B. A network pool
C. A vApp
D. A folder
【多选题】
From which two locations in the inventory hierarchy can you deploy a virtual machine using a template? (Choose two.)___
A. Directly from the template.
B. From a compute resource.
C. From an existing virtual machine.
D. From a Datastore.
【多选题】
A company has decided to implement Virtual SAN within their vSphere 6.x environment. The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list. Each ESXi host includes: <Two SAS Controllers that support Passthrough Mode> < Four Solid State Drives (SSDs) 1TB in size each> <20 SAS Magnetic Disks (MDs) 1TB in size each> <The SSDs and MDs are evenly split between the two SAS controllers>. The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode. Which two Disk Group configurations would meet the stated configuration requirements? (Choose two.)___
A. 4 disk groups with 1 SSD and 5 MDs each
B. 2 disk groups with 1 SSD and 7 MDs each
C. 2 disk groups with 2 SSDs and 7 MDs each
D. 2 disk groups with 1 SSD and 10 MDs each
【多选题】
A physical Windows 2008 R2 Server is converted to a virtual machine using VMware vCenter Converter. Upon completion of the conversion and subsequent power on operation, the virtual machine fails to boot and the message below is observed in the Console of the virtual machine: <STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE>. Which two potential issues may be causing this boot failure? (Choose two.)___
A. An incorrect SCSI controller was selected during conversion.
B. Incompatible software drivers were migrated into the virtual machine from the source machine.
C. The vmdk file backing the virtual machine was thick provisioned.
D. A snapshot was taken immediately after the conversion completed.
【多选题】
An administrator is configuring the Failover Order option on a vSphere Distributed Switch. Which two options should be used with IP-hash load balancing? (Choose two.)___
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
【多选题】
An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch. Which two options are typical values for ESXi networking? (Choose two.)___
A. 1492
B. 1500
C. 9000
D. 9089
【多选题】
Which two configurable options apply to both virtual machine CPU and memory allocation? (Choose two.)___
A. Reservation
B. Shares
C. Resource Pool
D. Reserve All
【多选题】
When attempting to power on a Virtual Machine you observe the following error: <Cannot open the disk '/vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it depends on.> Which three actions will be the best solutions to address this problem? (Choose three.)___
A. Verify that the virtual machine's disk files are present.
B. Investigate the host and virtual machine log files.
C. Verify the vmdk descriptor files and if required, recreate them.
D. Delete the disk file preventing the power on operation.
E. Migrate or register the virtual machine to a different host.
【多选题】
An administrator has been tasked with enabling High Availability ___ on a cluster in a vSphere 6.x environment with default settings. The cluster configures properly and there are no errors. The next day when powering on a virtual machine, an error is presented: <Not Enough Failover Resources>. Which three scenarios are likely causes of this error message? (Choose three.)(CDE)
A. The default VM Monitoring Sensitivity is set too high.
B. There are not enough datastore heartbeat datastores configured by default.
C. The default slot size in the cluster is set too high.
D. There are virtual machines with large CPU reservations.
E. A host is in maintenance mode for a replacement of a failed Hard Drive.
【多选题】
vMotion can be performed between which three physical boundaries? (Choose three.)___
A. Between two vCenter Server Systems
B. Between two vSphere Distributed Virtual Switches
C. Between two vCenter Server Datacenter objects
D. Between two VMware NSX Layer 4 segments
E. Between two NFS datastores
【多选题】
An administrator configures vSphere Replication for a virtual machine and enables multiple point in time (PIT) instances under the recovery settings in the Configure Replication wizard. Which two statements are correct for vSphere Replication with multiple point in time instances enabled? (Choose two.)___
A. vSphere Replication retains a number of snapshot instances of the virtual machine on the target site based on the retention policy that you specify.
B. vSphere Replication uses the virtual machine's snapshot instances to define the target site Point in Time instance based on the retention policy that you specify.
C. vSphere Replication does not support virtual machines with snapshots.
D. vSphere Replication supports virtual machines with snapshots.
【多选题】
An administrator is virtualizing a physical application server and adding it to an existing multi-tiered vApp. The application license is currently tied to the physical NIC's MAC address, so the administrator needs to ensure the license will function properly in the virtual machine. Which two actions can the administrator take to satisfy this task? (Choose two.)___
A. Set the MAC address for the vNIC in the guest operating system.
B. Install the physical server's NIC into the ESXi host.
C. Configure the MAC address for the vNIC using the vSphere Web Client.
D. Assign the physical server NIC's MAC address in the vSphere Distributed Switch.
【多选题】
Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.)___
A. Single-Initiator
B. Single-Initiator-Single-Target
C. Multiple-Initiators-Single-Target
D. Multiple-Initiators-Multiple-Targets
【多选题】
An administrator is attempting to remove an ESXi 6.x host from a vSphere Distributed Switch (vDS). When the administrator attempts to remove the host, the following error is observed: <The resource '16' is still in use.> What three steps are needed to successfully remove the host from the switch? (Choose three.)___
A. Select Manage Ports on the vDS for the host.
B. Locate all ports currently in use on the vDS for the host.
C. Migrate or delete any vmkernel or virtual machine adapters associated with the switch.
D. Remove all network cards from the switch before trying to remove the host.
E. Create a standard switch for everything to be automatically be migrated to.
【多选题】
Which two Virtual SAN related actions might start resynchronization of virtual machine objects? (Choose two.)___
A. Editing a virtual machine storage policy to increase the number of replicas.
B. Editing a virtual machine storage policy to reduce the number of replicas.
C. Editing a virtual machine storage policy to increase the number of disk stripes.
D. Editing a virtual machine storage policy to reduce the number of disk stripes.
【多选题】
An administrator is troubleshooting basic network connectivity issues. Which two scenarios are potential issues that this administrator might face? (Choose two.)___
A. The vSwitch is not attached to the correct physical network.
B. The portgroup is not configured to use correct VLAN.
C. Traffic shaping is configured incorrectly.
D. Jumbo frames is configured incorrectly.
【多选题】
Which three items should be validated prior to installing ESXi 6.x? (Choose three.)___
A. Remote Storage has been disconnected.
B. Installation media is available.
C. Server hardware clock is set to UTC.
D. Storage has been partitioned with a VMFS volume.
E. Network cards have been setup to use Jumbo
F. rames.
【多选题】
An administrator is performing an interactive installation of ESXi 6.x. Which three options are available for installation? (Choose three.)___
A. DVD
B. USB
C. PXE
D. Scripted
E. Auto Deploy
【多选题】
After installation of a host in your test environment, you need to move it to production. The only major change that needs to be made is that the hostname of the server needs to change. What are two ways that an administrator can change the host name without editing configuration files on the host directly? (Choose two.)___
A. Login to the Direct Console User Interface and change it from here.
B. Edit the Default TCP/IP Configuration from the vSphere Web Client.
C. Use the Ruby vSphere Client to send a script to the ESXi host that updates the hostname.
D. Update the information in DNS and the
E. SXi host will automatically update with these changes.
【多选题】
An administrator has unsuccessfully attempted several times to install an Operating System inside a virtual machine. The administrator finds that the installation fails at random intervals. Which two actions can be taken to resolve this issue? (Choose two.)___
A. Verify the md5sum and if invalid, download the installation files again.
B. Attempt the installation an additional time.
C. Attempt to use a different installation media or installation method.
D. Create a new virtual machine and attempt the installation with the existing media.
推荐试题
【单选题】
依据《安全生产法》的规定，生产经营单位要具备法定的安全生产条件，必须有相应的资金保障，___是生产经营单位的“救命钱”。
A. 安全意识
B. 安全产出
C. 安全投入
D. 安全责任
【单选题】
依据《安全生产法》的规定，特种作业人员的范围由___确定。
A. 国务院负责安全生产监督管理的部门
B. 国务院安全生产监督管理部门会同国务院有关部门
C. 国务院负责安全生产监督管理的部门会同国务院有关部门
D. 国务院负责安全生产监督管理的部门或者国务院有关部门
【单选题】
《安全生产法》规定，从业人员应当接受安全生产教育和培训，掌握本职工作所需的安全生产知识，提高___，增强事故预防和应急处理能力。
A. 安全生产技能
B. 安全生产意识
C. 安全培训技能
D. 安全素质
【单选题】
《安全生产法》规定，乡、镇人民政府以及街道办事处、___管理机构等地方人民政府的派出机关应当按照职责，加强对本行政区域内生产经营单位安全生产状况的监督检查，协助上级人民政府有关部门依法履行安全生产监督管理职责。
A. 开发区
B. 经济开发区
C. 经济技术开发区
D. 高新技术开发区
【单选题】
依据《安全生产法》的规定，从业人员当发现直接危及自身安全的紧急情况时，___。
A. 采取一切技术手段抢险救灾
B. 要立即向现场安全管理人员报告
C. 在采取必要的个人防护措施后，在现场静观事态变化
D. 有权停止作业或在采取可能的应急措施后撤离作业现场
【单选题】
依据《安全生产法》，生产经营单位与从业人员订立协议，免除或者减轻其对从业人员因生产安全事故伤亡依法应承担的责任的，该协议无效;对生产经营单位___。
A. 责令停止生产
B. 责令停产整顿
C. 责令限期改正
D. 主要负责人、个人经营的投资人给予罚款处罚
【单选题】
《安全生产法》规定，生产经营单位委托有关机构提供安全生产技术、管理服务的，保证安全生产的责任___。
A. 由服务单位负责
B. 由本单位负责
C. 由监管单位负责
D. 由单位负责人负责
【单选题】
某道路运输企业共有基层员工83人，管理人员15人，依据《安全生产法》的规定，下列关于该企业安全生产管理机构设置和安全生产管理人员配备的说法，正确的是___。
A. 该企业可根据需要，自主决定是否设置安全生产管理机构、配备安全生产管理人员，这是其经营自主权范围内的事
B. 该企业规模较小，配备兼职安全生产管理人员就可以了
C. 该企业应当设置安全生产管理机构或者配备专职安全生产管理人员
D. 该企业应当配备专职或者兼职的安全生产管理人员
【单选题】
某化工厂委托一家安全生产服务机构为本单位提供安全生产管理服务，在这种情况下，保证该厂安全生产的责任___。
A. 仍由该厂负责
B. 由接受委托的安全生产服务机构负责
C. 主要由接受委托的安全生产服务机构负责，该厂承担相应责任
D. 由双方在委托合同中约定
【单选题】
《河北省安全生产条例》规定，生产经营单位未按照规定对从业人员进行安全生产教育和培训的，责令限期改正；逾期未改正的，责令停产停业整顿，并可以按照每少培训一人处以___元罚款的标准进行处罚，但罚款总额不得超过二万元。
A. 500
B. 300
C. 100
D. 200
【单选题】
安全生产的教育和培训应当记入从业人员安全生产记录卡，记录卡应当由生产经营单位负责考核的人员和___本人签名。
A. 从业人员
B. 主要负责人
C. 安全生产管理人员
D. 人力资源部部长
【单选题】
危险物品的生产、经营、储存单位的主要负责人和安全生产管理人员，应当由主管的负有安全生产监督管理职责的部门对其安全管理知识和管理能力___后方可任职。
A. 认可
B. 评估
C. 考试
D. 考核合格
【单选题】
为了加强___工作，防止和减少生产安全事故，保障人民群众生命和财产安全，促进经济社会持续健康发展，根据《中华人民共和国安全生产法》等有关法律、行政法规的规定，结合河北省实际，制定河北省安全生产条例。
A. 安全生产
B. 环境卫生
C. 节能减排
D. 安全防护
【单选题】
《河北省安全生产条例》规定：生产经营单位应当建立生产安全事故评估制度。发生生产安全事故后，生产经营单位应当立即结合事故调查自行或者委托组织安全生产状况评估。发生较大以上生产安全事故的，应当对___进行安全生产状况评估。
A. 现场
B. 事故现场
C. 本单位重大危险源
【单选题】
《河北省安全生产条例》规定：生产经营单位应当建立生产安全事故评估制度。发生生产安全事故后，生产经营单位应当立即结合事故调查自行或者委托组织安全生产状况评估。发生一般生产安全事故的，应当对发生事故的___进行安全生产状况评估。
A. 单位
B. 单元
C. 车间
D. 场所
【单选题】
《河北省安全生产条例》规定：生产经营单位应当具备法律、法规和国家标准、行业标准或者地方标准规定的___;不具备安全生产条件的，不得从事生产经营活动。
A. 基本条件
B. 安全生产条件
C. 安全要求
D. 安全条件
【单选题】
《河北省安全生产条例》规定，承担安全评价、认证、检测、检验、培训和咨询业务的安全生产中介服务机构，应当依照国家有关规定取得相应的___。
A. 管理证书
B. 资质证书
C. 安全证书
D. 合格证书
【单选题】
对矿山、道路交通运输、建筑施工、危险化学品、烟花爆竹等领域从事生产经营活动的单位，依法收取安全生产风险抵押金，生产经营期间发生生产安全事故的，转作___所需资金。
A. 培训教育
B. 安全设施维修和维护
C. 事故抢险救灾和善后处理
D. 安全评价
【单选题】
《河北省安全生产条例》规定:___的待遇不得低于同级同职其他岗位管理人员，并孚受国家和本省规定的有关待遇。
A. 安全管理人员
B. 专职安全生产管理人员
C. 主管安全负责人
D. 主要负责人
【单选题】
《河北省安全生产条例》规定：___级以上人民政府应当将安全生产纳入本地区国民经济和社会发展规划，制定实施安全生产规划。安全生产规划应当与城乡规划相衔接。
A. 省
B. 市
C. 县
D. 乡
【单选题】
《河北省安全生产条例》规定:本省推行安全生产责任保险制度。在矿山、金属冶炼、建筑施工、交通运输、危险化学品、烟花爆竹、民用爆炸物品、渔业生产等高危行业领域___实施投保安全生产责任险。
A. 鼓励
B. 强制
C. 必须
D. 推行
【单选题】
《河北省安全生产条例》规定：车站、地铁站、码头、机场、歌舞厅、影剧院、体育场___擅自改变场所建筑的主体和承重结构。
A. 不得
B. 经负责人批准可以
C. 经主管部门批准可以
D. 经中介机构批准可以
【单选题】
《河北省安全生产条例》规定：承保安全生产责任险的___应当参与生产经营单位的风险评估管控，为投保安全生产责任险的生产经营单位提供生产安全事故预防、安全生产宣传教育培训等服务。
A. 保险公司
B. 主管部门
C. 生产单位
D. 负有安全监督职责部门
【单选题】
《河北省安全生产条例》规定：储存和堆放危险物品的港口、码头、仓库或者物流中心等场所的设计、建设应当符合国家设计规范和___。
A. 安全距离
B. 安全防护距离
C. 一定距离
D. 安全间距
