【判断题】
经纬仪光学对中误差一般应小于1mm
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
转子材质的不均匀将会影响高速机械转子精度
A. 对
B. 错
【判断题】
镦粗加工工艺最好用于塑性好,延展性大的金属材料台阶轴或双联齿轮等毛坯件加工
A. 对
B. 错
【判断题】
为了保证大型设备基础的承载能力,一般采用钢筋温凝土整体浇灌的结构
A. 对
B. 错
【判断题】
多段床身接合面刮削时,将被刮的接合面端用枕木垫高的目的是便于刮研
A. 对
B. 错
【判断题】
更换清单,由主管工艺人员提出,由备件人员核定出价格,更换件包括机械,电器,液(气)压的备配件和外购件
A. 对
B. 错
【判断题】
任何提高劳动生产率的措施,都必须以经济效益为前提
A. 对
B. 错
【判断题】
精密机床导轨在的粗糙度要求是:每25mm×25mm在16~20点
A. 对
B. 错
【判断题】
工作台要牢固平稳,平台周围要保持整洁,通行要方便,1米内禁止堆放物件
A. 对
B. 错
【判断题】
两孔轴线相交成 90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,应该先钻穿直径大的孔
A. 对
B. 错
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
A. 对
B. 错
【判断题】
经纬仪整平时,经反复调整,直到仪器转到任意位置时,水准气泡最大偏离值小于二分之一格为止
A. 对
B. 错
【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
推荐试题
【单选题】
在室外构架上工作,在邻近其他可能误登的带电架构上,应悬挂___的标示牌。
A. “止步,高压危险!”;
B. “禁止攀登,高压危险!”;
C. “从此上下!”;
D. “有电危险!”
【单选题】
因工作原因必须短时移动或拆除遮栏(围栏)、标示牌,应征得___同意,并在工作负责人的监护下进行。
A. 工作负责人;
B. 监护人;
C. 签发人;
D. 工作许可人
【单选题】
线路停电检修工作结束时,应得到___的工作结束报告。确认所有工作班组均已竣工,接地线已拆除,作业人员已全部撤离线路,与记录核对无误并做好记录后,方可下令拆除变电站或发电厂内的安全措施,向线路送电。
A. 工作负责人(包括用户);
B. 线路工作许可人;
C. 工作票签发人;
D. 线路工区主任
【单选题】
值班调控人员或线路工作许可人应将线路停电检修的___和工作任务做好记录。
A. 工作班组数目、工作负责人姓名;
B. 工作地点;
C. 工作班组数目、工作负责人姓名、工作地点;
D. 工作负责人姓名、工作地点
【单选题】
带电作业规定,保护间隙的接地线应用多股软铜线。其截面应满足接地短路容量的要求,但不得小于___m㎡。
A. 50;
B. 25;
C. 16;
D. 8
【单选题】
进行直接接触20kV及以下电压等级带电设备的作业时,应穿合格的绝缘防护用具;使用的___、安全帽应有良好的绝缘性能,必要时戴护目镜。
A. 安全带;
B. 工具;
C. 腰带;
D. 登高板
【单选题】
高压试验装置的电源开关,应使用明显断开的双极刀闸。为了防止误合刀闸,可在___上加绝缘罩。
A. 手柄;
B. 开关;
C. 刀闸;
D. 刀刃或刀座
【单选题】
在电缆隧(沟)道内巡视时,作业人员应携带便携式气体测试仪,通风不良时还应携带___。
A. 正压式空气呼吸器;
B. 防毒面具;
C. 口罩;
D. 湿毛巾;
【单选题】
变电站(生产厂房)内外工作场所的井、坑、孔、洞或沟道,应覆以与地面齐平而坚固的___。
A. 地砖;
B. 地板;
C. 盖板;
D. 围栏
【单选题】
工作场所的照明,应该保证足够的亮度。照明灯具的悬挂高度应不低于___m,并不得任意挪动。
A. 1.5;
B. 2.0;
C. 2.5;
D. 3.0
【单选题】
使用工具前应进行检查,机具应按其___的规定使用,不准使用已变形、已破损或有故障的机具。
A. 出厂说明书;
B. 铭牌;
C. 出厂说明书和铭牌;
D. 出厂说明书和铭牌与限额
【单选题】
电气工具和用具应由专人保管,___应由电气试验单位进行定期检查。
A. 每3个月;
B. 每6个月;
C. 每年
D. 每两年
【单选题】
不准在带有压力(液体压力或气体压力)的设备上或带电的设备上进行焊接。对承重构架进行焊接,应经过___。
A. 设备运维部门许可;
B. 有关技术部门的许可;
C. 检修部门批准;
D. 单位总工程师批准
【单选题】
使用中的氧气瓶和乙炔气瓶应___固定放置,氧气瓶和乙炔气瓶的距离不得小于5m,气瓶的放置地点不准靠近热源,应距明火10m 以外。
A. 水平;
B. 倾斜;
C. 并排;
D. 垂直
【单选题】
在变电站内使用起重机械时,应安装接地装置,接地线应用多股软铜线,其戴面应满足接地短路容量的要求,但不得小于___m㎡。
A. 25;
B. 16;
C. 10;
D. 35
【单选题】
链条葫芦使用前应检查吊钩、___、传动装置及刹车装置是否良好。
A. 链条;
B. 制动装置;
C. 限制器;
D. 控制器
【单选题】
在高处作业,较大的工具应用绳栓在___
A. 牢固的构件上;
B. 设备上;
C. 设备外壳上;
D. 横担上
【单选题】
在进行高处作业时,工作地点___ 应有围栏或装设其他保护装置,防止落物伤人。
A. 周围;
B. 附近;
C. 下面;
D. 旁边
【单选题】
使用单梯工作时,梯与地面的斜角度约为___。
A. 60°;
B. 40°;
C. 30°;
D. 45°
【单选题】
硬质梯子的横档应嵌在支柱上,并在距梯顶___m处设限高标志。
A. 0.6;
B. 0.8;
C. 1.0;
D. 1.2
【单选题】
触电急救,在医务人员___前,不得放弃现场抢救,更不能只根据没有呼吸或脉搏的表现,擅自判定伤员死亡,放弃抢救。
A. 未到来;
B. 未接替救治;
C. 作出死亡诊断;
D. 判断呼吸或脉搏表现
【单选题】
触电急救,首先要使触电者迅速脱离___,越快越好。
A. 电源;
B. 设备;
C. 现场;
D. 危险
【单选题】
判断伤员有无意识和反应,应在___s以内完成。
A. 15;
B. 10;
C. 6;
D. 8
【单选题】
触电急救,当采用胸外心脏按压法进行急救时,伤员应仰卧于___。
A. 柔软床垫;
B. 硬板床或地;
C. 担架;
D. 弹簧床
【单选题】
停电拉闸操作应按照___的顺序依次进行,送电合闸操作应按与上述相反的顺序进行。禁止带负荷拉合隔离开关(刀闸)。
A.   断路器(开关)—负荷侧隔离开关(刀闸)—电源侧隔离开关(刀闸);
B.   负荷侧隔离开关(刀闸)—断路器(开关)—电源侧隔离开关(刀闸);
C.   断路器(开关)—电源侧隔离开关(刀闸)—负荷侧隔离开关(刀闸);
D. 负荷侧隔离开关(刀闸)——电源侧隔离开关(刀闸)——断路器(开关)
【单选题】
在人员密集或有人员通过的地段进行杆塔上作业,___下方应按坠落半径设围栏或其他保护措施。
A.   杆塔;
B.   杆上人员;
C.   作业点;D.横担
【单选题】
在超过___m深的基坑内作业时,向坑外抛掷土石应防止土石回落坑内,并做好防止土层塌方的临边防护措施。
A.   1;
B.   1.5;
C.   2;
D. 2.5
【单选题】
进入作业现场应将使用的带电作业工具放置在___或绝缘垫上。
A.   干燥的地面;
B.   防潮的帆布;
C.   彩条布;
D. 纯棉布
【单选题】
风力大于___级,或湿度大于80%时,不宜带电作业。
A. 5;
B. 6;
C. 4;
D. 3
【单选题】
触电急救应分秒必争,一经明确心跳、呼吸停止的,立即就地迅速用___进行抢救,并坚持不断地进行。
A. 心脏按压法;
B. 口对口呼吸法;
C. 口对鼻呼吸法;
D. 心肺复苏法
【单选题】
事故紧急抢修应填用工作票或___。
A. 第一种;
B. 第二种;
C. 事故应急抢修单;
D. 事故紧急抢修单
【单选题】
在工作期间,工作票应始终保留在___手中。
A. 工作票签发人;
B. 工作负责人;
C. 工作许可人;
D. 专责监护人
【单选题】
第二种工作票需办理延期手续,应在有效时间尚未结束以前由___向工作票签发人提出申请,经同意后给予办理。
A. 工作票签发人;
B. 工作负责人;
C. 工作许可人;
D. 专责监护人
【单选题】
工作票所列人员的安全责任中正确组织工作是___的安全责任。
A. 工作许可人;
B. 工作负责人(监护人);
C. 专责监护人;
D. 小组负责人
【单选题】
工作票所列人员的安全责任中检查工作票所列安全措施是否正确完备,是否符合现场实际条件,必要时予以补充完善是___的安全责任。
A. 工作票签发人;
B. 工作许可人;
C. 工作负责人(监护人);
D. 专责监护人
【单选题】
工作票所列人员的安全责任中工作前对工作班成员进行工作任务、安全措施、技术措施交底和危险点告知,并确认每个工作班成员都已签名是___的安全责任。
A. 工作票签发人;
B. 工作负责人(监护人);
C. 工作许可人;
D. 专责监护人
【单选题】
《安全生产法》规定生产经营单位的主要负责人对本单位安全生产工作___。
A. 全面负责;
B. 负责监督检查;C、负责日常检查; D、负责指挥作业
【单选题】
《安全生产法》中关于安全生产工作方针的表述最准确的是___。
A. 以人为本、安全第一、预防为主;
B. 安全第一、预防为主、政府监管;
C. 安全第一、预防为主、综合治理;
D. 安全第一、预防为主、群防群治
【单选题】
关于《安全生产法》的立法目的下列表述中不准确的是___。
A. 加强安全生产工作;
B. 防止和减少生产安全事故;
C. 保障人民群众生命和财产安全;
D. 提升经济发展速度
【单选题】
安全生产工作应当以人为本,坚持安全发展,坚持安全第一、预防为主、综合治理的方针,强化和落实生产经营单位的主体责任,建立___的机制。
A. 生产经营单位负责、职工参与、政府主导、行业自律和社会监督;
B. 生产经营单位自律、职工参与、政府主导、行业监管和社会监督;
C. 生产经营单主导位、职工参与、政府监管、行业自律和社会监督;
D. 生产经营单位负责、职工参与、政府监管、行业自律和社会监督