【多选题】
What are three goals of resource management within a cluster? (Choose three.)___
A. To prevent virtual machines from monopolizing resources and to guarantee predictable service rates.
B. To exploit undercommitted resources and overcommit with graceful degradation.
C. To provide solutions to potential problems that you might encounter when using vCenter Server.
D. To control the relative importance of virtual machines and provide flexible dynamic partitioning.
E. To provide additional network administration capabilities.
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
ABD
解析
暂无解析
相关试题
【多选题】
Which three actions can be taken as a result of executing the vSphere Update Manager 6.x scan and remediation wizards? (Choose three.)___
A. Install and upgrade software in virtual machines.
B. Upgrade the firmware on ESXi host devices.
C. Upgrade and Patch ESXi hosts.
D. Install and update third-party software on hosts.
E. Upgrade virtual machine hardware.
【多选题】
Which two statements are true about deploying and using vSphere Replication? (Choose two.)___
A. ESXi hosts managed by a single vCenter Server instance require a connection between the two vSphere Replication appliances.
B. Sites managed by different vCenter Server instances require a connection between the two vSphere Replication appliances.
C. Sites managed by different vCenter Server instances require the use of Site Recovery Manager and a connection between the two vSphere Replication appliances.
D. ESXi hosts managed by a single vCenter Server instance require a single vSphere Replication appliance.
【多选题】
An administrator is attempting to power on a virtual machine, but the task is hanging at 95%. What three scenarios best explain why this problem is happening? (Choose three.)___
A. A virtual machine question is currently being posed to the administrator.
B. Another task for the virtual machine or other component is already in progress.
C. The VMware High Availability cluster has insufficient resources to guarantee failover.
D. The host has lost access to the storage device containing the virtual machine files.
E. The host is under resource contention and unable to power on the virtual machine.
【多选题】
Which three features are not supported when using Fault Tolerance in vSphere 6.x? (Choose three.)___
A. Virtual Volumes (VVOLS)
B. Storage vMotion
C. Virtual Machine Component Protection
D. vMotion
E. vSphere Distributed Switches
【多选题】
Which two storage controller configurations can be used with Virtual SAN? (Choose two.)___
A. SAS controllers in Passthrough mode
B. SAS controllers in RAID0 mode
C. SAS controllers in RAID1 mode
D. SAS controllers in RAID10 mode
【多选题】
Which three are requirements when using vMotion to move a virtual machine across vCenter Server systems? (Choose three.)___
A. Both vCenter Servers must be using Enhanced Linked Mode.
B. Both vCenter Servers must be in the same Single Sign-On Domain.
C. Time must be synchronized.
D. Duplicate VM MAC addresses must be configured.
E. Both vCenter Servers must have High Availability enabled on source and destination clusters.
【多选题】
Which two components can be used when configuring Enhanced Linked Mode? (Choose two.)___
A. vCenter Server Appliance
B. vRealize Operations Manager
C. vSphere Management Appliance
D. vCenter Server for Windows
【多选题】
An organization has a number of virtual machines that would benefit from Fault Tolerance. These include: <A single vCPU Apache Server> < A dual vCPU vCenter Server> < A quad vCPU SQL Server> <An eight vCPU Hadoop Server>. Which two virtual machines can be configured to use VMware Fault Tolerance? (Choose two.)___
A. Apache Server
B. vCenter Server
C. SQL Server
D. Hadoop Server
【多选题】
Which two badges are major badges in vRealize Operations? (Choose two.)___
A. Risk
B. Efficency
C. Workload
D. Faults
【多选题】
An administrator is deploying multiple Windows 2003 Virtual Machines from the same template. What two steps should be taken to avoid network conflicts? (Choose two.)___
A. Customize the guest operating system.
B. Install VMware Tools into the new virtual machines.
C. Copy the Microsoft Sysprep tools onto the vCenter Server system.
D. Ensure the e1000 vmnic is selected for each new virtual machine.
【多选题】
Which three conditions would prevent Storage I/O Control from being enabled on a group of datastores? (Choose three.)___
A. The datastores planned for the solution are used by different vSphere clusters.
B. A datastore planned for the solution is configured as a Raw Device Mapping file.
C. A datastore planned for the solution has three extents.
D. A datastore planned for the solution is configured as NFS.
E. The organization has an Enterprise license.
【多选题】
Which two actions are prerequisites to adding ESXi 6.x hosts to a vSphere Distributed Switch? (Choose two.)___
A. Verify that there is at least one Distributed Port Group on the Distributed Switch.
B. Verify that the Distributed Port Group have active uplinks configured in its teaming and failover policy.
C. Verify that the
D. istributed Switch has been configured with a Network Profile.
【多选题】
An organization has configured Distributed Power Management (DPM) on a vSphere 6 cluster. The organization wants to be alerted when an ESXi host has been powered down by DPM. Which two options represent the type and name of the alarm that would accomplish this? (Choose two.)___
A. DrsEnteringStandbyModeEvent
B. DrsEnteredStandbyModeEvent
C. Event-based
D. Condition-based
【多选题】
Which two allow for the disabling of Network Rollback operations? (Choose two.)___
A. Modifying the vpxd advanded configuration options and adding the config.vpxd.network.rollback key
B. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the<rollback> xml tag
C. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the <networkrollback> xml tag
D. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\firstboot\vpxd-service- spec.prop file and adjusting the <rollback> xml tag
【多选题】
An administrator is tasked with performing a vMotion migration of a virtual machine. The virtual machine is configured as follows: <vSphere Flash Read Cache (vFRC) enabled> <Is part of a Distributed Resource Cluster (DRS) Cluster> Which two statements are true? (Choose two.)___
A. Each ESXi host in the cluster supports multiple virtual flash resources.
B. Each ESXi host in the cluster supports one virtual flash resource.
C. DRS treats powered-on virtual machines with Flash Read Cache as having a preferred affinity to their current host and moves them only for mandatory reasons.
D. DRS treats powered-on virtual machines with Flash Read Cache as having a required affinity to their current host and does not move them.
【多选题】
An administrator is using the Host Failures to Tolerate Admission Control Policy for a vSphere High Availability ___ cluster. When configuring this setting on the cluster, the administrator sees this error message: <Insufficient resources to satisfy HA failover level on cluster > What are two likely causes for the error? (Choose two.)(AB)
A. The hosts in the cluster are disconnected.
B. A host in the cluster is displaying an HA error.
C.
D. istributed Resource Scheduler has not been configured on the cluster.
【多选题】
What are two ways to identify TCP/IP stack information? (Choose two.)___
A. Using the vSphere Web Client
B. Using esxcli network ip netstack
C. Using esxcfg-netstack
D. Using the vSphere Client
【多选题】
Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)___
A. A value in the Virtual Flash Read Cache text box must be entered.
B. A Flash Resource Pool for Cache size reservation must be entered.
C. The Device backing and the block size must be configured.
D. The
E. nable virtual flash host swap cache check box must be selected.
【多选题】
What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two.)___
A. Networks
B. Applications
C. Storage
D. Management
【多选题】
When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials. What two options are probable causes of the authentication failure? (Choose two.)___
A. The vSphere credentials have not been granted permissions.
B. The vSphere credentials are granted read-only permissions.
C. The vSphere credentials are granted no-access permissions.
D. The vSphere credentials are not a member of the local administrator group.
【多选题】
An administrator is performing a scripted installation of ESXi 6.x. In which three locations does the script need to be? (Choose three.)___
A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore
【多选题】
In order for a company to meet regulatory requirements, all ESXi 6.x Hosts must be configured to direct logs to a syslog server. What are two ways ESXi hosts can configured for this action? (Choose two)___
A. Use the esxcli system syslog command.
B. Edit them in the ESXi host Advanced System Settings.
C. From the Syslog collector user interface of the Web Client.
D. Syslog logging is not available for
E. SXi Hosts.
【多选题】
Which three actions can be executed when an alarm is triggered? (Choose three.)___
A. Send an email.
B. Send an SNMP trap.
C. Run a script or command.
D. Run an Orchestrator workflow.
E. Send a trigger to syslog.
【多选题】
An administrator is attempting to power on a virtual machine, but is unable to do so. Which two reasons are probable causes of the failure? (Choose two.)___
A. Storage access to the virtual machine swap file has been lost.
B. One of the virtual machine VMDK files is locked.
C. Virtual machine is running CentOS 7.0 64-bit.
D. Virtual machine has Hyper-Threading enabled.
【多选题】
An administrator has configured a host profile so that ESXi 6.x hosts will point to the corporate NTP server for time synchronization. The NTP server is located at 10.0.30.213, but time has not been synchronized properly across the ESXi hosts. The administrator reviews Host Profile settings as shown in the Exhibit. Which two steps are required to resolve the issue? (Choose two.)___
A. Correct the NTP server IP address.
B. Check the host for host profile compliance.
C. Remediate the host based on the updated host profile.
D. Change the NTP server to the FQDN as IP Addresses are not supported.
【多选题】
An administrator is attempting to migrate a large Hadoop virtual machine using vMotion. The administrator notices a delay when the machine is quiesced. The Hadoop virtual machine is processing many transactions a second to an in-memory database. Which two actions would help reduce the amount of time needed to perform a vMotion on this virtual machine? (Choose two.)___
A. Use multiple NICs for the vMotion vmkernel port.
B. Use a 10Gbps Network card for the vMotion vmkernel port.
C. Add an additional management network to help transmit the data quicker.
D. Disable Fault Tolerance before performing the vMotion.
【多选题】
An administrator is installing a new network card in an ESXi 6.x host that is part of a vSphere cluster. When the host is placed into maintenance mode, the vSphere Web Client displays the progress bar at 2% for over 30 minutes. Which two are likely reasons for this occurrence? (Choose two.)___
A. Maintenance mode is unable to migrate all virtual machines from the host.
B. There is a large number of virtual machines that must be migrated from the host.
C. VMware High Availability is in the process of reconfiguring the cluster.
D. Each virtual machine on the
E. SXi host must be reconfigured to recognize the new adapter.
【多选题】
Which two events happen when Distributed Resource Scheduler (DRS) is disabled? (Choose two.)___
A. The cluster's resource pool heirarchy and affinity rules are re-established when DRS is turned back on.
B. The cluster's resource pool hierarchy and affinity rules are not re-established when DRS is turned back on.
C. The cluster's resource pools are removed from the cluster.
D. The cluster's resource pools are removed from the cluster and assigned to the hosts.
【多选题】
Which two networking connection types can be configured on a virtual switch? (Choose two.)___
A. Virtual machine portgroups
B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network
C. Web services over the Management Network
D. NFS and FCoE storage services
【多选题】
An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails. What are two reasons that the host failed to enter maintenance mode? (Choose two.)___
A. The DRS cluster Automation Level is set to Partially Automated mode.
B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group.
C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group.
D. One of the virtual machines on the
E. SXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated.
【多选题】
When modifying a vApp, which two vSphere entities can be added? (Choose two.)___
A. A resource pool
B. A network pool
C. A vApp
D. A folder
【多选题】
From which two locations in the inventory hierarchy can you deploy a virtual machine using a template? (Choose two.)___
A. Directly from the template.
B. From a compute resource.
C. From an existing virtual machine.
D. From a Datastore.
【多选题】
A company has decided to implement Virtual SAN within their vSphere 6.x environment. The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list. Each ESXi host includes: <Two SAS Controllers that support Passthrough Mode> < Four Solid State Drives (SSDs) 1TB in size each> <20 SAS Magnetic Disks (MDs) 1TB in size each> <The SSDs and MDs are evenly split between the two SAS controllers>. The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode. Which two Disk Group configurations would meet the stated configuration requirements? (Choose two.)___
A. 4 disk groups with 1 SSD and 5 MDs each
B. 2 disk groups with 1 SSD and 7 MDs each
C. 2 disk groups with 2 SSDs and 7 MDs each
D. 2 disk groups with 1 SSD and 10 MDs each
【多选题】
A physical Windows 2008 R2 Server is converted to a virtual machine using VMware vCenter Converter. Upon completion of the conversion and subsequent power on operation, the virtual machine fails to boot and the message below is observed in the Console of the virtual machine: <STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE>. Which two potential issues may be causing this boot failure? (Choose two.)___
A. An incorrect SCSI controller was selected during conversion.
B. Incompatible software drivers were migrated into the virtual machine from the source machine.
C. The vmdk file backing the virtual machine was thick provisioned.
D. A snapshot was taken immediately after the conversion completed.
【多选题】
An administrator is configuring the Failover Order option on a vSphere Distributed Switch. Which two options should be used with IP-hash load balancing? (Choose two.)___
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
【多选题】
An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch. Which two options are typical values for ESXi networking? (Choose two.)___
A. 1492
B. 1500
C. 9000
D. 9089
【多选题】
Which two configurable options apply to both virtual machine CPU and memory allocation? (Choose two.)___
A. Reservation
B. Shares
C. Resource Pool
D. Reserve All
【多选题】
When attempting to power on a Virtual Machine you observe the following error: <Cannot open the disk '/vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it depends on.> Which three actions will be the best solutions to address this problem? (Choose three.)___
A. Verify that the virtual machine's disk files are present.
B. Investigate the host and virtual machine log files.
C. Verify the vmdk descriptor files and if required, recreate them.
D. Delete the disk file preventing the power on operation.
E. Migrate or register the virtual machine to a different host.
【多选题】
An administrator has been tasked with enabling High Availability ___ on a cluster in a vSphere 6.x environment with default settings. The cluster configures properly and there are no errors. The next day when powering on a virtual machine, an error is presented: <Not Enough Failover Resources>. Which three scenarios are likely causes of this error message? (Choose three.)(CDE)
A. The default VM Monitoring Sensitivity is set too high.
B. There are not enough datastore heartbeat datastores configured by default.
C. The default slot size in the cluster is set too high.
D. There are virtual machines with large CPU reservations.
E. A host is in maintenance mode for a replacement of a failed Hard Drive.
【多选题】
vMotion can be performed between which three physical boundaries? (Choose three.)___
A. Between two vCenter Server Systems
B. Between two vSphere Distributed Virtual Switches
C. Between two vCenter Server Datacenter objects
D. Between two VMware NSX Layer 4 segments
E. Between two NFS datastores
推荐试题
【单选题】
从事技术工种的劳动者上岗前必须经过___。
A. 培训
B. 训练
C. 培养
D. 教育
【单选题】
汽车修理工艺规程要写明总的要求并___写明每一工序如何操作。
A. 具体
B. 不具体
C. 分清
D. 确定
【单选题】
用固定式镗缸机镗削发动机缸套,应选用汽缸体的___作为定位基准。
A. 下平面
B. 上平面
C. 曲轴主轴轴承孔中心线
D. 凸轮轴孔中心线
【单选题】
柴油发动机曲轴中心线径向圆跳动的大修标准是___mm。
A. ≤0.05
B. ≤0.01
C. ≤0.50
D. ≤0.02
【单选题】
汽车修理劳动组织形式有___类型。
A. 四种
B. 六种
C. 二种
D. 三种
【单选题】
发动机曲轴飞轮组上的飞轮齿圈,如单面损坏可用___修复。
A. 焊接法
B. 局部修复法
C. 堆焊法
D. 粘结法
【单选题】
调整转向器啮合间隙时,转向器应处于___位置。
A. 中间啮合
B. 两端啮合
C. 任意
D. 前端
【单选题】
汽车减振器伸张行程的阻力应___压缩行程的阻力。
A. 大于
B. 小于
C. 等于
D. 小于或等于
【单选题】
汽车制动器制动气室推杆连接叉与制动调整臂销孔可通过___对正。
A. 拉动连接叉
B. 拧动连接叉
C. 两者均可
D. 敲击
【单选题】
解放CA1092型汽车手动变速器的滑动齿轮啮合间隙一般为___ mm。
A. 0.15~0.50
B. 0.10~0.25
C. 0.05~0.15
D. 0.35~0.50
【单选题】
挂车大修送修标志是___。
A. 挂车车架和货箱
B. 转盘和货箱
C. 车架
D. 货箱和转盘
【单选题】
对于变速器总成大修送修标志,___说法不正确。
A. 变速器轴承承孔磨损逾限
B. 变速器壳体破裂
C. 变速器轴及齿轮恶性磨损
D. 变速器操纵机构松动
【单选题】
下列选项中,___不是汽车前桥总成的大修送修标志。
A. 转向节上的轴承损坏
B. 前轴出现裂纹
C. 前轴变形严重
D. 主销承孔磨损逾限
【单选题】
汽车空调取暖系统按热量的来源分为___。
A. 余热式和独立式
B. 水暖式和气暖式
C. 水暖式和电暖式
D. 冷却水和废气式
【单选题】
检验发动机汽缸盖和汽缸体裂纹,可用压力为___ kPa的压缩空气,保持5min,以无泄漏为好。
A. 294~392
B. 192~294
C. 392~490
D. 353~441
【单选题】
解放CA1092汽车变速器壳体前端面对第一、二轴轴承孔轴线的端面圆跳动应不大于___ mm。
A. 0.05
B. 0.035
C. 0.10
D. 0.025
【单选题】
汽车车架的变形检验,用___即可进行。
A. 拉线和直尺
B. 直尺
C. 水平仪
D. 拉线
【单选题】
用百分表检查启动机启动轴是否弯曲,如摆差大于___ mm应进行校正。
A. 0.1
B. 0.2
C. 0.5
D. 0.15
【单选题】
汽油机活塞环槽与第一环侧隙为___ mm。
A. 0.05~0.11
B. 0.08~0.36
C. 0.10~0.25
D. 0.05~0.30
【单选题】
汽车大修竣工后,质量小于4500kg的汽车方向盘自由行程不大于___。
A. 15°
B. 25°
C. 30°
D. 20°
【单选题】
整车大修对轿车轮胎进行评定,其花纹深度不得小于___ mm。
A. 3.2
B. 2.0
C. 1.6
D. 1.0
【单选题】
汽车发动机大修竣工后,不应有“四漏”现象,“四漏”是指___。
A. 漏油、漏水、漏电、漏气
B. 漏油、漏水、漏电、漏件
C. 漏水、漏电、漏气、漏调
D. 漏水、漏电、漏油、漏装
【单选题】
汽车空调转速控制的信号取自___。
A. 点火线圈
B. 曲轴位置传感器
C. 凸轮轴位置传感器
D. 发动机转速传感器
【单选题】
合理选择___可以提高发动机的充气效率。
A. 进气迟开角
B. 排气迟开角
C. 排气早闭角
D. 进气迟闭角
【单选题】
汽油机缸内压力达到最大的时期为___。
A. 着火延迟期
B. 急燃期
C. 补燃期
D. 后燃期
【单选题】
过量空气系数越大,着火延迟期越___。
A. 长
B. 短
C. 不确定
D. 不变
【单选题】
关于表面点火,说法不正确的是___。
A. 是一种不正常燃烧
B. 表面点火危害小于爆燃
C. 表面点火形成原因有两种
D. 表面点火危害较大
【单选题】
柴油机耗油率曲线较汽油机___。
A. 平坦
B. 弯曲
C. 无法比较
D. 不确定
【单选题】
下列不属于车辆检测诊断内容的是___。
A. 底盘功率
B. 发动机功率
C. 异响
D. 曲轴磨损量
【单选题】
自动变速器控制系统目前多采用___。
A. 液力控制
B. 电子控制
C. 机械控制
D. 气液控制
【单选题】
一般自动变速器离合器的自由间隙为___mm。
A. 0.5~1.0
B. 0.5~2.0
C. 2.0~2.5
D. 2.5~3.0
【单选题】
从环保角度来说,汽车空调制冷剂应采用___。
A. R12
B. R-134a
C. R13
D. R-134b
【单选题】
多数汽车空调冷凝器安装在___。
A. 汽车散热器前方
B. 汽车散热器后方
C. 仪表板下
D. 车厢内某个位置
【单选题】
汽车空调旋转斜盘式压缩机常采用的有___。
A. 二缸
B. 四缸
C. 八缸
D. 六缸或十缸
【单选题】
评定在用运输车辆技术等级按___标准进行。
A. 国家
B. 检测站自定
C. 交通部
D. 厂家
【单选题】
前轮定位检测应该使用___。
A. 线绳
B. 米尺
C. 前束尺或前轮定位仪
D. 水平仪
【单选题】
汽车行驶时的空气阻力的计算公式为___。
A. CDAV2/21.15
B. CDAV3/21.15
C. CDAV/21.15
D. CDAV2/37.15
【单选题】
汽车ABS在紧急制动时有___种工作状态。
A. 一
B. 两
C. 三
D. 四
【单选题】
ABS将汽车滑移率控制在___。
A. 10%~15%
B. 15%~30%
C. 20%~30%
D. 30%~40%
【单选题】
电控汽油喷射发动机的空气阀的作用是___。
A. 低温时增加进气量
B. 自动调整怠速
C. 进气预热
D. 控制排放