【单选题】
计算机内部指令的编码形式都是___编码。
A. 二进制
B. 八进制
C. 十进制
D. 十六进制
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
十进制数57转换成二进制数是___
A. 111001B
B. 100111B
C. 110011B
D. 101011B
【单选题】
将十六进制数5EFH转换为十进制数是___
A. 24304
B. 1519
C. 2757
D. 95
【单选题】
将十六进制数97H转换为二进制数是___
A. 10010111B
B. 11101101B
C. 11011110B
D. 11010111B
【填空题】
1. 十六进制数9DH转换为二进制数是___B。
【填空题】
2. 将二进制数11111011100转换为十进制数是___。
【填空题】
3. 将十进制数255转换成十六进制数是___H。
【填空题】
4. Cache是一种介于___和内存之间的可高速存取数据的介质。
【单选题】
磁力线上任一点 ___方向,就是该点的磁场方向。
A. 指向 N 极
B. 切线
C. 直线
【单选题】
一般而言,PLC 的 I/O 点数要冗余多少___。
A. 10%
B. 5%
C. 15%
D. 20%
【单选题】
通常对机器人进行示教编程时, 要求最初程序点与最终程序点的位置___,可提高工作效率。
A. 相同
B. 不同
C. 分离越大越好
D. 分离越小越好
【单选题】
___是工业机器人最常用的一种手部形式。
A. 钩托式
B. 弹簧式
C. 气动式
D. 夹钳式
【单选题】
三菱 FX 系统 PLC 从站写入信息到 CC-Link 网络主站,采用的功能指令是___。
A. FROM
B. MOV
C. TO
D. SET
【单选题】
示教编程器上安全开关握紧为 ON, 松开为 OFF 状态, 作为进而追加的功能, 当握紧力过大时,为___状态。
A. 不变
B. ON
C. OFF
D. 延时 OFF
【单选题】
“12V/6W”的灯泡,接入 6V 电路中,通过灯丝的实际电流是___
A. 1A
B. 0.5A
C. 0.25A
D. 0.125A
【单选题】
触摸屏是___。
A. 输入设备
B. 输出设备
C. 编程设备
D. 输入和输出设备
【单选题】
基尔霍夫第一定律表明___
A. 流过任何处的电流为零
B. 流过任一节点的电流为零
C. 流过任一节点的电流代数和为零
D. 流过任一回路的电流为零
【单选题】
下面哪种传感器不属于触觉传感器___。
A. 接近觉传感器
B. 接触觉传感器
C. 压觉传感器
D. 热敏电阻
【单选题】
视在功率的单位是___。
A. VA
B. W
C. Var
【单选题】
目前电力电网的低压供电系统中的线电压为___,相电压为__。
A. 220V、380V。
B. 380V、220V。
C. 220V、220V。
D. 380V、380V。
【单选题】
点位控制下的轨迹规划是在___进行的。
A. 关节坐标空间
B. 矢量坐标空间
C. 直角坐标空间
D. 极坐标空间
【单选题】
触摸屏通过___方式与 PLC 交流信息。
A. 通信
B. I/O 信号控制
C. 继电器连接
D. 电气连接
【单选题】
在工业机器人速度分析和以后的静力学分析中都将遇到类 似的雅可比矩阵,我们称之为工业机器人雅可比矩阵,或简称雅可比,一般用符号___表示。
A. L
B. P
C. J
D. F
【单选题】
人机接口设备与 PLC 的通信一般支持___、现场总线、以太网等通信方式。
A. 蓝牙
B. 串口
C. 并口
D. 无线
【单选题】
动作级编程语言又可以分为___和末端执行器编程两种动作编程。
A. 腕级编程
B. 关节级编程
C. 手部级编程
D. 本体级编程
【单选题】
喷涂机器人一般采用___驱动,具有动作速度快、防爆性能好等特点。
A. 气动
B. 液压
C. 电力
D. 步进电机
【单选题】
用来表征机器人重复定位其手部于同一目标位置的能力的参数是 ___。
A. 定位精度
B. 速度
C. 工作范围
D. 重复定位精度
【单选题】
WORD 数据格式的位数是___。
A. 1 位
B. 8 位
C. 16 位
D. 32 位
【单选题】
传感器包括以下三个功能部件:敏感元件、传感元件、___元件。
A. 辅助
B. 控制
C. 执行
D. 测量
【单选题】
TP 示教盒的作用不包括___。
A. 点动机器人
B. 离线编程
C. 试运行程序
D. 查阅机器人状态
【单选题】
工业机器人机座有固定式和___两种。
A. 移动式
B. 行走式
C. 旋转式
D. 电动式
【单选题】
工业机器人的主电源开关在什么位置___。
A. 机器人本体上
B. 示教器上
C. 控制柜上
D. 需外接
【单选题】
人机接口一般使用液晶显示屏,小尺寸人机接口只能显示___。
A. 图形和动画
B. 数字和图形
C. 字符和图形
D. 数字和字符
【单选题】
伺服控制系统一般包括控制器、被控对象、执行环节、比较环节和___。
A. 换向结构
B. 转换电路
C. 存储电路
D. 检测环节
【单选题】
采用触摸屏等可编程终端代替传统的按钮、开关甚至___作为人机接口设备,在工业现场得到了广泛的应用。
A. 传感器
B. 变频器
C. 电机
D. 仪表
【单选题】
PLC 控制系统中,大多数输入都属于开关量输入信号范畴,如各种按钮、___、接触器接点、传感器检测输入。
A. 行程开关信号
B. 电压信号
C. 电流信号
D. 压力信号
【单选题】
流程图的绘制原则:自顶向下、___、数据处理流入/流出协调等。
A. 数据流只能有一端连接处理框
B. 数据流至多有一端连接处理框
C. 数据流至少有两端连接处理框
D. 数据流至少有一端连接处理框
【单选题】
通信协议是一组约定的集合,是一套语义和语法的规则,用来规定___。
A. 数据格式
B. 通信方式
C. 传输方式
D. 有关功能部件在通信过程中的操作
【单选题】
PLC 更换 I/O 模块时,___操作是不正确的。
A. 更换 I/O 模块时要切断电源
B. 更换 I/O 模块时要保持通电
C. 更换 I/O 模块的型号应相同
D. 更换 I/O 模块时要正确插拔
【单选题】
选用直流电源供电的 PLC,原则上应选用稳压电源供电,至少应通过三相桥式整流___后供电。
A. 滤波
B. 逆变
C. 抗干扰
D. 放大
【单选题】
触摸屏控制器的主要作用是从触摸点检测装置上接收触摸信息,并将它转换成___。
A. 开关信息
B. 位置信息
C. 时间信息
D. 设置信息
推荐试题
【多选题】
What are two features introduced in Network I/O Control version 3? (Choose two.)___
A. Bandwidth reservation per traffic type
B. Network resource pools
C. CoS tagging
D. Bandwidth guarantee to virtual machines
【多选题】
Which two correct virtual machine advanced configuration parameters will accomplish this? (Choose two.)___
A. isolation.device.edit.disable = “FALSE”
B. isolation.device.edit.disable = “TRUE”
C. isolation.device.connectable.disable = “FALSE”
D. isolation.device.connectable.disable = “TRUE”
【多选题】
Which three statements are correct regarding booting an ESXi Host from Fibre Channel SAN? (Choose three.)___
A. Direct connect topology is supported.
B. Each host must have its own boot LUN.
C. ESXi hosts do not require local storage.
D. Multipathing to a boot LUN on an active-passive array is supported.
E. Hosts can share one common boot LUN.
【多选题】
Which two tasks should a vSphere administrator perform if the vmkernel log reports VMFS metadata errors? (Choose two.)___
A. contact VMware technical support
B. reformat the datastore
C. check the device with VOMA
D. ignore the messages
【多选题】
Which two statements are true for a vCenterServer user account that is used for vSphere Data Protection (VDP)? (Choose two.)___
A. The user account must be assigned with Administrator role.
B. The password for the user account cannot contain spaces.
C. The user account should be created in the Single Sign-On domain
D. The user account cannot inherit required permissions from a group role.
【多选题】
Which three storage protocols are supported by Virtual Volumes? (Choose three.)___
A. FCIP
B. FCoE
C. iSCSI
D. NFS v3
E. NFS v4
【多选题】
A vSphere administrator observes a CPU spike on one of the web servers (view the Exhibit.) Which two statements can describe the cause of this activity? (Choose two.)___
A. The network packet size is too large.
B. VMware Tools is not installed.
C. Disk latency is present on the datastore.
D. The network packet size is too small.
【多选题】
Which three operations can cause VMFS metadata updates? (Choose three.)___
A. Restarting a VM using the guest OS.
B. Launching a VM console.
C. Migrating a VM with vMotion.
D. Powering a VM on or off.
E. Expanding a VMFS datastore.
【多选题】
*What two services run on all nodes in a vCenter Server HA cluster? (Choose two.)___
A. vmware-vmon
B. vmware-vpostgres
C. vmare-rbd-watchdog
D. vmware-vcha
【多选题】
Which two statements are true regarding Auto Deploy in version 6.5? (Choose two.)___
A. Auto Deploy can be configured and managed via PowerCLI.
B. Auto Deploy can be configured and managed via the vSphere Client.
C. Auto
D. eploy can be configured and managed via the vSphere Web Client.
【多选题】
What three options can improve network performance for a virtual machine? (Choose three.)___
A. MLD
B. TSO
C. NetFlow
D. LRO
E. SR-IOV
【多选题】
Which two storage technologies are supported for MSCS? (Choose two.)___
A. NFS
B. VAAI
C. iSCSI
D. FC
【多选题】
When upgrading a VMware vSAN cluster to version 6.5, which two tasks must be completed to comply with upgrade requirements and VMware-recommended best practices? (Choose two.)___
A. Use RVC to upgrade the hosts.
B. Use the latest available ESXi version.
C. Back up all VMs.
D. Use only the “Full data migration” maintenance mode option.
【多选题】
What two enhancements are in VMFS6 but not in VMFS5? (Choose two.)___
A. Support for 4k native disks
B. Support for 512e disks
C. GPT storage device partitioning
D. Automatic space reclamation
【多选题】
Which two statements describe why a vSphere DRS cluster would report load imbalance? (Choose two.)___
A. The configured migration threshold is too high.
B. The configured migration threshold is too low.
C. DRS is configured for Partially Automated.
D. Enhanced vMotion Compatibility (EVC) is enabled.
【多选题】
A vSphere Administrator must ensure that vCenter Server service is running in a domain user account rather than Local System Account. To accomplish this, the user account should have which two permissions? (Choose two.)___
A. Log on as a service.
B. Act as part of the operating system.
C. Log on as a batch job.
D. Log on locally.
【多选题】
A virtual machine fails to power on after being deployed from a template. What two remediation steps could correct this issue? (Choose two.)___
A. Increase CPU reservation
B. Decrease memory reservation
C. Increase memory reservation
D. Increase datastore capacity
E. Decrease CPU reservation
【多选题】
Which three directories are available under the vcsa-cli-installer folder of the vCenter Server Appliance installation media? (Choose three.)___
A. \mac
B. \ovftool
C. \migration-assistant
D. \win32
E. \lin64
【多选题】
What are three considerations when booting ESXihost from SAN software FCoE? (Choose three.)___
A. The VMware_FCoE_vSwitch that the installer automatically created cannot be changed.
B. Boot LUN cannot be shared with other hosts even on shared storage.
C. Multipathing is not supported at pre-boot.
D. Software FCoE boot configuration cannot be changed from within
E. SXi.
【多选题】
Which two choices are applicable to vSphere Availability? (Choose two.)___
A. Heartbeat Datastores
B. VM Startup/Shutdoown
C. Power Management
D. Admission Control
【多选题】
A user is a member of groups A and B. -VM10 and VM20 are in VM Folder. -Group A is assigned permission “Read-only” on VM Folder. What two configurations will allow the user to edit the settings for only VM10? (Choose two.)___
A. Assign group B permission “virtual machine power user” to VM10.
B. Assign group B permission “virtual machine console user” to VM10.
C. Assign group A permission “virtual machine console user” to VM10.
D. Assign group A permission “virtual machine power user” to VM10.
【多选题】
Which two new vSphere 6.5 features enable an Administrator to locate configuration options when creating or editing host profiles more easily than in previous versions? (Choose two.)___
A. Add the configuration option to favorites.
B. Navigate the option tree.
C. Search for the configuration option.
D. Copy the configuration option from a different profile.
【多选题】
What are the two valid storage controller types for VMs on ESXi 6.5? (Choose two.)___
A. FCoE
B. SATA
C. NVMe
D. iSCSI
【多选题】
Which two options can optimize conversion with VMware Converter? (Choose two.)___
A. Disable real-time antivirus scanners.
B. Remove the source from Active Directory.
C. Remove third-party device drivers.
D. Exclude diagnostic partitions from conversion.
E. Disable Volume Shadow Copy (VSS).
【多选题】
vSphere Availability considers which two factors for virtual machine restarts? (Choose two.)___
A. Host Isolation Response
B. file accessibility
C. NUMA node size
D. resource reservations
【多选题】
Which two virtual NICs support Wake-on-Lan to resume a virtual machine that is in standby mode? (Choose two)___
A. Flexible
B. E1000E
C. E1000
D. vmxnet 3
【多选题】
Which two logs should be examined to troubleshoot a Windows vCenter Server upgrade failure? (Choose two.)___
A. vminst.log
B. vim-um-msi.log
C. firstboot.log
D. pkgmgr.log
【多选题】
Which are two supported storage primitives for VAAI NAS? (Choose two.)___
A. Full File Clone
B. Reserve Space
C. hardware assisted locking
D. block zeroing
【多选题】
Which two parameters must be configured for Windows in-guest disk mirroring? (Choose two.)___
A. scsi#.returnNoConnectDuringAPD = “FALSE”
B. scsi#.terminateVMOnPDL = “TRUE”
C. scsi#.returnBusyOnNoConnectStatus = “FALSE”
D. scsi#.returnNoConnectDuringAPD = “TRUE”
【多选题】
Which two items are required to enable NPIV in a virtual machine? (Choose two.)___
A. use of physical RDMs
B. physical HBA support
C. use of virtual disks
D. hardware version 11 or higher
【多选题】
A vSphere Administrator has VM Component Protection (VMCP) enabled, but the VM was not restarted when one of the VMFS datastores experienced an All Paths Down (APD) failure. What two scenarios would explain why the virtual machine was not restarted? (Choose two.)___
A. VM Monitoring is required in order for VMCP to failover during an APD event.
B. VMware Tools is not installed on the guest operating system for the VM.
C. Insufficient Capacity is available on the failover ESXi hosts.
D. The APD failure was corrected before the VM could be restarted.
【多选题】
What are two requirements in order to restore a Resource Pool Tree from a snapshot? (Choose two.)___
A. vSphere DRS must be turned on.
B. A restore can only be performed on a vSphere DRS cluster within the original vCenter Server.
C. vSphere
D. RS must be turned off.
【多选题】
Which three vSphere features are compatible with vSphere Replication? (Choose three.)___
A. vSphere High Availability
B. vSphere Fault Tolerance
C. vSphere Storage
D. RS
【多选题】
What two VMware Remote Console Options can be defined in the virtual machine settings? (Choose two.)___
A. Boot Delay
B. Maximum number of sessions
C. Guest OS lock
D. Total video memory
【多选题】
VMware Converter can import a powered off virtual machine from which two virtual machine platforms?(Choose two.)___
A. Microsoft Hyper-V
B. Citrix Xen
C. VMware Workstation
D. Linux with KVM
【多选题】
Which two options allow storage space reclamation? (Choose two.)___
A. Use VMFS6 datastores.
B. Use esxcli storage vmfs unmap.
C. Use the SAN console (management tool).
D. Use the vSphere Web Client.
【多选题】
An administrator must reprovision 25 hosts with a new image profile that he has created. Which two methods can the administrator use to change the image profile? (Choose two.)___
A. From the vSphere Web client home page, select the Deploy Rules tab in the Auto Deploy section.
B. Run the Copy-Deploy Rule and specify the Replace Item parameter with Power CLI.
C. From the vSphere Web client home page, select the Assign Rules tab in the Auto
D. eploy section.
【多选题】
What are three parameters for traffic filtering or marking? (Choose three.)___
A. Protocol
B. Traffic Direction
C. DSCP value
D. virtual Port ID
【多选题】
The vSphere administrator must change the path selection policy (PSP) to comply with best practices. Which two interfaces can be used to change the PSP? (Choose two.)___
A. ESXi shell
B. vSphere Client
C. ESXi host client
D. vSphere Web Client
【多选题】
In what two ways can Storage DRS load balance virtual machines? (Choose two.)___
A. anti-affinity rules
B. virtual storage controller
C. guest OS family
D. I/O latency