【多选题】
An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle. Which two files should the administrator analyze to determine the cause of the failure? (Choose two.)___
A. Server\utils\logs\imsTrace.log
B. Server\utils\logs\install.txt
C. %TEMP%\utils\logs\vminst.log
D. %TEMP%\vminst.log
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
AD
解析
暂无解析
相关试题
【多选题】
An administrator is unable to remove an ESXi 6.x host from a vSphere Distributed Switch. What are two likely reasons for this issue? (Choose two.)___
A. Vmkernel interfaces on the switch are still in use.
B. VM Network port group adapters are connected to different switch.
C. Physical NICs are migrated to different switch.
D. VM Network adapters are connected to this switch.
【多选题】
Which two Identity Sources are available to add for vCenter Single Sign-On authentication? (Choose two.)___
A. LocalOS
B. OpenLDAP
C. NIS as an LDAP Server
D. VCMSDS
【多选题】
What are three goals of resource management within a cluster? (Choose three.)___
A. To prevent virtual machines from monopolizing resources and to guarantee predictable service rates.
B. To exploit undercommitted resources and overcommit with graceful degradation.
C. To provide solutions to potential problems that you might encounter when using vCenter Server.
D. To control the relative importance of virtual machines and provide flexible dynamic partitioning.
E. To provide additional network administration capabilities.
【多选题】
Which three actions can be taken as a result of executing the vSphere Update Manager 6.x scan and remediation wizards? (Choose three.)___
A. Install and upgrade software in virtual machines.
B. Upgrade the firmware on ESXi host devices.
C. Upgrade and Patch ESXi hosts.
D. Install and update third-party software on hosts.
E. Upgrade virtual machine hardware.
【多选题】
Which two statements are true about deploying and using vSphere Replication? (Choose two.)___
A. ESXi hosts managed by a single vCenter Server instance require a connection between the two vSphere Replication appliances.
B. Sites managed by different vCenter Server instances require a connection between the two vSphere Replication appliances.
C. Sites managed by different vCenter Server instances require the use of Site Recovery Manager and a connection between the two vSphere Replication appliances.
D. ESXi hosts managed by a single vCenter Server instance require a single vSphere Replication appliance.
【多选题】
An administrator is attempting to power on a virtual machine, but the task is hanging at 95%. What three scenarios best explain why this problem is happening? (Choose three.)___
A. A virtual machine question is currently being posed to the administrator.
B. Another task for the virtual machine or other component is already in progress.
C. The VMware High Availability cluster has insufficient resources to guarantee failover.
D. The host has lost access to the storage device containing the virtual machine files.
E. The host is under resource contention and unable to power on the virtual machine.
【多选题】
Which three features are not supported when using Fault Tolerance in vSphere 6.x? (Choose three.)___
A. Virtual Volumes (VVOLS)
B. Storage vMotion
C. Virtual Machine Component Protection
D. vMotion
E. vSphere Distributed Switches
【多选题】
Which two storage controller configurations can be used with Virtual SAN? (Choose two.)___
A. SAS controllers in Passthrough mode
B. SAS controllers in RAID0 mode
C. SAS controllers in RAID1 mode
D. SAS controllers in RAID10 mode
【多选题】
Which three are requirements when using vMotion to move a virtual machine across vCenter Server systems? (Choose three.)___
A. Both vCenter Servers must be using Enhanced Linked Mode.
B. Both vCenter Servers must be in the same Single Sign-On Domain.
C. Time must be synchronized.
D. Duplicate VM MAC addresses must be configured.
E. Both vCenter Servers must have High Availability enabled on source and destination clusters.
【多选题】
Which two components can be used when configuring Enhanced Linked Mode? (Choose two.)___
A. vCenter Server Appliance
B. vRealize Operations Manager
C. vSphere Management Appliance
D. vCenter Server for Windows
【多选题】
An organization has a number of virtual machines that would benefit from Fault Tolerance. These include: <A single vCPU Apache Server> < A dual vCPU vCenter Server> < A quad vCPU SQL Server> <An eight vCPU Hadoop Server>. Which two virtual machines can be configured to use VMware Fault Tolerance? (Choose two.)___
A. Apache Server
B. vCenter Server
C. SQL Server
D. Hadoop Server
【多选题】
Which two badges are major badges in vRealize Operations? (Choose two.)___
A. Risk
B. Efficency
C. Workload
D. Faults
【多选题】
An administrator is deploying multiple Windows 2003 Virtual Machines from the same template. What two steps should be taken to avoid network conflicts? (Choose two.)___
A. Customize the guest operating system.
B. Install VMware Tools into the new virtual machines.
C. Copy the Microsoft Sysprep tools onto the vCenter Server system.
D. Ensure the e1000 vmnic is selected for each new virtual machine.
【多选题】
Which three conditions would prevent Storage I/O Control from being enabled on a group of datastores? (Choose three.)___
A. The datastores planned for the solution are used by different vSphere clusters.
B. A datastore planned for the solution is configured as a Raw Device Mapping file.
C. A datastore planned for the solution has three extents.
D. A datastore planned for the solution is configured as NFS.
E. The organization has an Enterprise license.
【多选题】
Which two actions are prerequisites to adding ESXi 6.x hosts to a vSphere Distributed Switch? (Choose two.)___
A. Verify that there is at least one Distributed Port Group on the Distributed Switch.
B. Verify that the Distributed Port Group have active uplinks configured in its teaming and failover policy.
C. Verify that the
D. istributed Switch has been configured with a Network Profile.
【多选题】
An organization has configured Distributed Power Management (DPM) on a vSphere 6 cluster. The organization wants to be alerted when an ESXi host has been powered down by DPM. Which two options represent the type and name of the alarm that would accomplish this? (Choose two.)___
A. DrsEnteringStandbyModeEvent
B. DrsEnteredStandbyModeEvent
C. Event-based
D. Condition-based
【多选题】
Which two allow for the disabling of Network Rollback operations? (Choose two.)___
A. Modifying the vpxd advanded configuration options and adding the config.vpxd.network.rollback key
B. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the<rollback> xml tag
C. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the <networkrollback> xml tag
D. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\firstboot\vpxd-service- spec.prop file and adjusting the <rollback> xml tag
【多选题】
An administrator is tasked with performing a vMotion migration of a virtual machine. The virtual machine is configured as follows: <vSphere Flash Read Cache (vFRC) enabled> <Is part of a Distributed Resource Cluster (DRS) Cluster> Which two statements are true? (Choose two.)___
A. Each ESXi host in the cluster supports multiple virtual flash resources.
B. Each ESXi host in the cluster supports one virtual flash resource.
C. DRS treats powered-on virtual machines with Flash Read Cache as having a preferred affinity to their current host and moves them only for mandatory reasons.
D. DRS treats powered-on virtual machines with Flash Read Cache as having a required affinity to their current host and does not move them.
【多选题】
An administrator is using the Host Failures to Tolerate Admission Control Policy for a vSphere High Availability ___ cluster. When configuring this setting on the cluster, the administrator sees this error message: <Insufficient resources to satisfy HA failover level on cluster > What are two likely causes for the error? (Choose two.)(AB)
A. The hosts in the cluster are disconnected.
B. A host in the cluster is displaying an HA error.
C.
D. istributed Resource Scheduler has not been configured on the cluster.
【多选题】
What are two ways to identify TCP/IP stack information? (Choose two.)___
A. Using the vSphere Web Client
B. Using esxcli network ip netstack
C. Using esxcfg-netstack
D. Using the vSphere Client
【多选题】
Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)___
A. A value in the Virtual Flash Read Cache text box must be entered.
B. A Flash Resource Pool for Cache size reservation must be entered.
C. The Device backing and the block size must be configured.
D. The
E. nable virtual flash host swap cache check box must be selected.
【多选题】
What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two.)___
A. Networks
B. Applications
C. Storage
D. Management
【多选题】
When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials. What two options are probable causes of the authentication failure? (Choose two.)___
A. The vSphere credentials have not been granted permissions.
B. The vSphere credentials are granted read-only permissions.
C. The vSphere credentials are granted no-access permissions.
D. The vSphere credentials are not a member of the local administrator group.
【多选题】
An administrator is performing a scripted installation of ESXi 6.x. In which three locations does the script need to be? (Choose three.)___
A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore
【多选题】
In order for a company to meet regulatory requirements, all ESXi 6.x Hosts must be configured to direct logs to a syslog server. What are two ways ESXi hosts can configured for this action? (Choose two)___
A. Use the esxcli system syslog command.
B. Edit them in the ESXi host Advanced System Settings.
C. From the Syslog collector user interface of the Web Client.
D. Syslog logging is not available for
E. SXi Hosts.
【多选题】
Which three actions can be executed when an alarm is triggered? (Choose three.)___
A. Send an email.
B. Send an SNMP trap.
C. Run a script or command.
D. Run an Orchestrator workflow.
E. Send a trigger to syslog.
【多选题】
An administrator is attempting to power on a virtual machine, but is unable to do so. Which two reasons are probable causes of the failure? (Choose two.)___
A. Storage access to the virtual machine swap file has been lost.
B. One of the virtual machine VMDK files is locked.
C. Virtual machine is running CentOS 7.0 64-bit.
D. Virtual machine has Hyper-Threading enabled.
【多选题】
An administrator has configured a host profile so that ESXi 6.x hosts will point to the corporate NTP server for time synchronization. The NTP server is located at 10.0.30.213, but time has not been synchronized properly across the ESXi hosts. The administrator reviews Host Profile settings as shown in the Exhibit. Which two steps are required to resolve the issue? (Choose two.)___
A. Correct the NTP server IP address.
B. Check the host for host profile compliance.
C. Remediate the host based on the updated host profile.
D. Change the NTP server to the FQDN as IP Addresses are not supported.
【多选题】
An administrator is attempting to migrate a large Hadoop virtual machine using vMotion. The administrator notices a delay when the machine is quiesced. The Hadoop virtual machine is processing many transactions a second to an in-memory database. Which two actions would help reduce the amount of time needed to perform a vMotion on this virtual machine? (Choose two.)___
A. Use multiple NICs for the vMotion vmkernel port.
B. Use a 10Gbps Network card for the vMotion vmkernel port.
C. Add an additional management network to help transmit the data quicker.
D. Disable Fault Tolerance before performing the vMotion.
【多选题】
An administrator is installing a new network card in an ESXi 6.x host that is part of a vSphere cluster. When the host is placed into maintenance mode, the vSphere Web Client displays the progress bar at 2% for over 30 minutes. Which two are likely reasons for this occurrence? (Choose two.)___
A. Maintenance mode is unable to migrate all virtual machines from the host.
B. There is a large number of virtual machines that must be migrated from the host.
C. VMware High Availability is in the process of reconfiguring the cluster.
D. Each virtual machine on the
E. SXi host must be reconfigured to recognize the new adapter.
【多选题】
Which two events happen when Distributed Resource Scheduler (DRS) is disabled? (Choose two.)___
A. The cluster's resource pool heirarchy and affinity rules are re-established when DRS is turned back on.
B. The cluster's resource pool hierarchy and affinity rules are not re-established when DRS is turned back on.
C. The cluster's resource pools are removed from the cluster.
D. The cluster's resource pools are removed from the cluster and assigned to the hosts.
【多选题】
Which two networking connection types can be configured on a virtual switch? (Choose two.)___
A. Virtual machine portgroups
B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network
C. Web services over the Management Network
D. NFS and FCoE storage services
【多选题】
An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails. What are two reasons that the host failed to enter maintenance mode? (Choose two.)___
A. The DRS cluster Automation Level is set to Partially Automated mode.
B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group.
C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group.
D. One of the virtual machines on the
E. SXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated.
【多选题】
When modifying a vApp, which two vSphere entities can be added? (Choose two.)___
A. A resource pool
B. A network pool
C. A vApp
D. A folder
【多选题】
From which two locations in the inventory hierarchy can you deploy a virtual machine using a template? (Choose two.)___
A. Directly from the template.
B. From a compute resource.
C. From an existing virtual machine.
D. From a Datastore.
【多选题】
A company has decided to implement Virtual SAN within their vSphere 6.x environment. The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list. Each ESXi host includes: <Two SAS Controllers that support Passthrough Mode> < Four Solid State Drives (SSDs) 1TB in size each> <20 SAS Magnetic Disks (MDs) 1TB in size each> <The SSDs and MDs are evenly split between the two SAS controllers>. The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode. Which two Disk Group configurations would meet the stated configuration requirements? (Choose two.)___
A. 4 disk groups with 1 SSD and 5 MDs each
B. 2 disk groups with 1 SSD and 7 MDs each
C. 2 disk groups with 2 SSDs and 7 MDs each
D. 2 disk groups with 1 SSD and 10 MDs each
【多选题】
A physical Windows 2008 R2 Server is converted to a virtual machine using VMware vCenter Converter. Upon completion of the conversion and subsequent power on operation, the virtual machine fails to boot and the message below is observed in the Console of the virtual machine: <STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE>. Which two potential issues may be causing this boot failure? (Choose two.)___
A. An incorrect SCSI controller was selected during conversion.
B. Incompatible software drivers were migrated into the virtual machine from the source machine.
C. The vmdk file backing the virtual machine was thick provisioned.
D. A snapshot was taken immediately after the conversion completed.
【多选题】
An administrator is configuring the Failover Order option on a vSphere Distributed Switch. Which two options should be used with IP-hash load balancing? (Choose two.)___
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
【多选题】
An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch. Which two options are typical values for ESXi networking? (Choose two.)___
A. 1492
B. 1500
C. 9000
D. 9089
【多选题】
Which two configurable options apply to both virtual machine CPU and memory allocation? (Choose two.)___
A. Reservation
B. Shares
C. Resource Pool
D. Reserve All
推荐试题
【单选题】
空气泡沫钩管可用于扑救___火灾。
A. 地下建筑
B. 油品储罐
C. 高层建筑
D. 气体储罐
【单选题】
防化手套主要用于___的手部防护。
A. 高电压场合
B. 有割伤场合
C. 化学灾害事故现场
D. 高温场合
【单选题】
热像仪主要用于___。
A. 寻找被困人员
B. 水质分析
C. 检测气象
D. 可燃气体检测
【单选题】
救生气垫每次使用间隔时间应为___秒,不准2人同时使用。
A. 1
B. 1~2
C. 2~3
D. 3~5
【单选题】
空气泡沫枪一般主要用于扑救___。
A. 易燃.可燃液体火灾
B. 可燃气体火灾
C. 可燃金属火灾
D. 固体可燃物火灾
【单选题】
___是输送.喷射液体灭火剂(或冷却水)的动力装置。
A. 引水装置
B. 喷射装置
C. 灭火剂储罐
D. 消防泵
【单选题】
___用于对眼睛.呼吸道及表皮有直接腐蚀性危害的重度化学灾害现场。
A. 防火防化服
B. 内置式重型防化服
C. 防化防核服
D. 简易防化服
【单选题】
消防避火服适用于___防护。
A. 放射性污染
B. 高温有火焰灼伤危险场所
C. 军事毒剂
D. 化学事故现场
【单选题】
消防避火服防火温度一般为___℃。
A. 800
B. 1800
C. 2000
D. 500
【单选题】
在狭小空间长时间作业,无法使用个人携带式空气呼吸器时,应使用___。
A. 移动式供气源
B. 氧气呼吸器
C. 强式送风器
D. 过滤式防毒面具
【单选题】
___用于在黑暗.浓烟条件下观察火源及火势蔓延方向,寻找被困人员。
A. 有毒气体探测仪
B. 生命探测仪
C. 热像仪
D. 蛇眼可视仪
【单选题】
___用于堵塞管道.容器.油罐(槽)车.储罐等直径480mm以上的裂缝。
A. 外封式堵漏袋
B. 内封式堵漏袋
C. 金属堵漏套管
D. 泄漏密封枪
【单选题】
___用于产生大流量.远射程.高强度射流,以扑救大规模.大面积火灾。
A. 直流水枪
B. 空气泡沫枪
C. 水(泡沫)炮
D. 多用水枪
【单选题】
楼层外部垂直铺设水带时可使用___加以固定。
A. 水带挂钩
B. 水带护桥
C. 水带包布
D. 水带护套
【单选题】
消防直流水枪的工作压力范围为___MPA。
A. 2~7
B. 0.7~1.2
C. 0.2~0.7
D. 5~7
【单选题】
___水枪水流量大.射程远,适合扑救大面积火灾。
A. 直流水枪
B. 喷雾水枪
C. 多用水枪
D. 带架水枪
【单选题】
机动排烟机以___为动力。
A. 内燃机
B. 蒸汽
C. 风力
D. 高压水
【单选题】
高压水带耐压为___MPA。
A. 0.8
B. 1.0
C. 1.6
D. 4.0
【单选题】
通过道路铺设水带时应垫上___。
A. 水带挂钩
B. 水带护桥
C. 水带包布
D. 毛毯
【单选题】
高层建筑火灾灭火力量部署的先后顺序是___。
A. 先着火层.再着火上层.后着火下层
B. 先着火上层.再着火层.后着火下层
C. 先着火下层.再着火上层.后着火层
D. 先着火层.再着火下层.后着火上层
【单选题】
地铁隧道中的机械通风分___。
A. 特风和普风
B. 低风和弱风
C. 中风和微风
D. 强风和软风
【单选题】
在扑救高层建筑火灾中,疏散和救助遇险和遇难人员的基本顺序是___。
A. 先着火层.再着火上层.后着火下层
B. 先着火上层.再着火层.后着火下层
C. 先着火下层.再着火上层.后着火层
D. 先着火层.再着火下层.后着火上层
【单选题】
实施对高层建筑火灾扑救时,灭火进攻起点一般选择在___。
A. 着火层
B. 着火层下一层或下二层
C. 首层
D. 着火层上一层
【单选题】
扑救高层建筑火灾,前沿指挥所应设在___。
A. 着火层
B. 着火层下一层或下二层
C. 首层
D. 着火层上一层或上二层
【单选题】
扑救高层建筑火灾的战术要求是___。
A. 以固为主,固移结合
B. 内攻近战
C. 救人第一
D. 上堵下防
【单选题】
扑救有毒区域的火灾,对中毒较重.已经休克的人员,要先送到___进行急救,然后迅速送往医院抢救。
A. 空气新鲜.通风良好的地方
B. 火场指挥部
C. 安全区
D. 救护车
【单选题】
扑救高层建筑火灾从内部进攻时,水枪阵地要依托___设置。
A. 防火.防烟分区
B. 承重墙
C. 疏散口
D. 窗口
【单选题】
某高层建筑18层发生火灾,疏散和救助人员途径不正确的是___。
A. 从楼层疏散通道经消防电梯进入避难层
B. 从楼层疏散出口经防烟封闭楼梯,进入起火搂层的下层
C. 利用举高消防车疏散救助遇险人员
D. 利用救生气垫救助遇险人员
【单选题】
高层建筑登高面裙房高度不得大于___。
A. 5m
B. 6m
C. 7m
D. 8m
【单选题】
高层民用建筑是指___的住宅建筑或建筑高度超过24m的公共建筑。
A. 2层和2层以上
B. 8层和8层以上
C. 10层和10层以上
D. 12层和12层以上
【单选题】
以下不属于高层建筑的灭火战术措施是___。
A. 内外结合
B. 内攻近战
C. 逐层消灭
D. 分割围歼
【单选题】
在扑救高层建筑火灾中,利用广播系统疏散人员,应先通知___。
A. 着火层人员
B. 着火层和着火层上层人员
C. 着火层和着火层下层人员
D. 单位消防管理人员
【单选题】
在扑救高层建筑火灾时,战斗人员和器材集结处应位于___。
A. 着火层
B. 着火层下一层或下二层
C. 首层
D. 消防控制室
【单选题】
扑救高层建筑火灾,对地面积水要及时组织人员排除,防止流入___。
A. 电梯井
B. 楼梯间
C. 前室
D. 控制室
【单选题】
进入消防控制室了解火情时,应由___操作设备。
A. 值班或工程技术人员
B. 消防指挥员
C. 消防侦察人员
D. 单位管理人员
【单选题】
利用水泵接合器向室内管网供水时,应首先注意___。
A. 水泵接合器使用范围
B. 水泵接合器耐压能力
C. 水泵接合器的接口形式
D. 水泵接合器的接口口径
【单选题】
登高疏散救助人员时,应首先考虑使用___。
A. 举高消防车
B. 客梯
C. 防烟封闭楼梯
D. 消防电梯
【单选题】
火灾中,导致玻璃幕墙爆裂的主要因素是___。
A. 火焰.高温
B. 室内热气压
C. 建筑构件变形挤压
D. 玻璃自身耐热性能差
【单选题】
扑救高层建筑火灾实施排烟措施时,在烟雾流经部位应___。
A. 清理障碍物
B. 放下防火卷帘
C. 关闭门窗
D. 布置水枪设防
【单选题】
在对密闭房间进行排烟时,为防止发生轰燃应采取的措施是___。
A. 逐渐开启排烟口,使用开花水枪掩护
B. 先开启进风口,再开启排烟口
C. 先开启排烟口,再用大量水稀释
D. 减少排烟口数量和面积